Additional Information Part Number PCM22000A Features Manual or Signal Mode Jumper selectable to follow analog signal or potentiometer Current Limit IR Compensation 601 Speed Range Maximum Speed 1.37 Form Factor 1% Base Speed Regulation MM Footprint Traditional MM mounting pattern and footprint Minimum Speed...

Additional Information Part Number PCM23401A Features 1.37 Form Factor 1% Base Speed Regulation Manual /Signal / Ratio Mode Jumper selectable to follow a potentiometer, and analog signal, or an analog signal with a potentiometer to set a ratio Signal Minimum Current Limit Isolated Logic...

Additional Information Part Number PCM23411A Features NEMA 4X Enclosure Water resistant and dust proof enclosure Manual /Signal / Ratio Mode Jumper selectable to follow a potentiometer, and analog signal, or an analog signal with a potentiometer to set a ratio 1.37 Form Factor 1%...

Additional Information Part Number PCM3

Additional Information Part Number PCMXP02-115AC Features Minimum Speed Signal Adjust Isolated Logic Allows floating or grounded 0 - 10 VDC signal MM Footprint Traditional MM mounting pattern and footprint 801 Speed Range Maximum Speed Low Cost Designed for cost savings in large quantities for...

Additional Information Part Number PCMXP05-115AC Features Accepts AC or DC Input Can accept 100-160 VDC or 70-130 VAC input Minimum Speed Signal Adjust Low Cost Designed for cost savings in large quantities for OEMs Isolated Logic Allows floating or grounded 0 - 10 VDC...

Additional Information Part Number PCMXP10-115AC Features Accepts AC or DC Input Can accept 100-160 VDC or 70-130 VAC input Isolated Logic Allows floating or grounded 0 - 10 VDC signal Minimum Speed Signal Adjust 1.05 Form Factor 1% Base Speed Regulation MM Footprint Traditional...

Additional Information Part Number RD16U Features Panel Mount Designed to mount though a door or panel 1.37 Form Factor 3% Base Speed Regulation Pre-mounted Potentiometer Reduces wiring time and makes a compact package Compact Size Fits where most drives cannot Built-in Power Switch The...

Additional Information Part Number RG25U Features 4Q Reversing Regenerative/4 Quadrant drives have the ability to perform quick, contactorless reversing on-the-fly! Spade terminals Easy to terminate wires. MM footprint An extremely compact size in an industry standard mounting footprint. Speed range and regulation 3% regulation...

Additional Information Part Number RG500A Features Speed range and regulation 1% regulation over 50:1 speed range. 0.1% regulation over 60:1 speed range with the addition of a tachometer for feedback. Armature or tachometer mode is switch selectable. Stopping Modes User can regeneratively brake (run/brake...

Additional Information Part Number RG500UA Features Options and accessories PCM option adds Burr Brown isolation, 201-0024 inhibit plug for regenerative brake option, 200-0386 limit switch logic board and DLC600 digital controller. User adjustable calibration pots IR compensation, forward torque, reverse torque, tachometer, min speed,...

Additional Information Part Number RG500UA-PCM Features Additional features Dual voltage AC input, switch selectable armature or tachometer feedback mode and field supply for shunt wound motors. Cage clamp terminal block Quick and easy wire terminations. On board fusing No need to add external fusing...

Additional Information Part Number RG501A Features 4Q Reversing Regenerative / 4-Quadrant drives have the ability to perform quick and contractorless braking and/or reversing-on-the-fly Forward Torque Reverse Torque Independent Forward and Reverse Speeds Two potentiometers on front cover allow different speeds in the forward and...

Additional Information Part Number RG510A Features Stopping Modes User can regeneratively brake (run/brake switch), coast to a stop (power on/off switch) or decelerate to stop (N.O.). User can also decerlate to min speed (N.C). 4Q Reversing Regenerative/4 Quadrant drives have the ability to perform...

Additional Information Part Number RG510UA Features On board fusing No need to add external fusing for protection of your motor or drive. Options and accessories PCM option adds Burr Brown isolation, 201-0024 inhibit plug for regenerative brake option, 200-0386 limit switch logic board and...

Additional Information Part Number RG510UA-PCM Features Additional features Dual voltage AC input, switch selectable armature or tachometer feedback mode and field supply for shunt wound motors. On board fusing No need to add external fusing for protection of your motor or drive. User adjustable...

Additional Information Part Number RG511A Features Maximum Speed Minimum Speed Forward Torque Reverse Torque IR Compensation Tach Feedback Independent Forward and Reverse Speeds Two potentiometers on front cover allow different speeds in the forward and reverse directions Tach Feedback Accepts tachogenerator feedback for tighter...

Additional Information Part Number RG51UA Features User adjustable calibration pots IR compensation, max speed, forward torque, reverse torque and deadband. Stopping Modes Regenerative braking (N.O.). 4Q Reversing Regenerative/4 Quadrant drives have the ability to perform quick, contactorless reversing on-the-fly! Speed range and regulation 3%...

Additional Information Part Number RG60U Features 4Q reversing Regenerative/4 quadrant drives have the ability to perform quick, contactorless, reversing on-the-fly Stopping modes The user can decelerate (N.O.), regeneratively brake (N.O.) or coast the motor to a stop (N.O. and N.C.). User adjustable calibration pots...

Additional Information Part Number RG60U-PCM Features 4Q reversing Regenerative/4 quadrant drives have the ability to perform quick, contactorless, reversing on-the-fly! Speed range and regulation 1% regulation over 50:1 speed range. 0.1% over 60:1 speed range with the addition of a tachometer for feedback Additional...

Additional Information Part Number RG60U-T Features 4Q reversing Regenerative/4 quadrant drives have the ability to perform quick, contactorless, reversing on-the-fly! Speed range and regulation 1% regulation over 50:1 speed range. 0.1% over 60:1 speed range with the addition of a tachometer for feedback Stopping...

Additional Information Part Number RG61U Features Additional features Tachometer feedback, gold extruded chassis and plastic capped trimmer pots MM footprint Extremely compact size with an industry standard mounting footprint. Speed range and regulation 1% regulation over 50:1 speed range. 0.1% over 60:1 speed range...

Additional Information Part Number RG61U-4S Features Stopping modes The user can decelerate (N.O.), regeneratively brake (N.O.) or coast the motor to a stop (N.O. and N.C.). PCM option Add a “PCM to the end of the part number to receive the drive with an...

Additional Information Part Number RG61U-PCM Features Configurable enable and inhibit Can be configured to be either normally open or normally closed Diagnostic LEDs Power, forward current limit, reverse current limit Additional features Tachometer feedback, gold extruded chassis and plastic capped trimmer pots Stopping modes...

Additional Information Part Number RG61U-T Features Speed range and regulation 1% regulation over 50:1 speed range. 0.1% over 60:1 speed range with the addition of a tachometer for feedback. Configurable enable and inhibit Can be configured to be either normally open or normally closed...