Subscribe To Our Newsletter
Get the latest updates on new products and upcoming sales
WEIDMULLER 8965360000
Additional Information Part Number 8965360000 Probability Of Failure MTBF 215 Years SIL PAPER SIL certificate Digital Output Type NPN-Transitor, Switching frequency 5 kHz Nominal switching voltage 30 V DC Continuous current 80 mA Function Output = input, direct or inverse (configurable) Approvals ROHS Conform UL File Number Search E337701 Dimensions And Weights Width 22.5 mm Width (inches) 0.886 inch Height 119.2 mm Height (inches)...
Couldn't load pickup availability
Additional Information
- Part Number
- 8965360000
Probability Of Failure
- MTBF
- 215 Years
- SIL PAPER
- SIL certificate
Digital Output
- Type
- NPN-Transitor, Switching frequency 5 kHz
- Nominal switching voltage
- 30 V DC
- Continuous current
- 80 mA
- Function
- Output = input, direct or inverse (configurable)
Approvals
- ROHS
- Conform
- UL File Number Search
- E337701
Dimensions And Weights
- Width
- 22.5 mm
- Width (inches)
- 0.886 inch
- Height
- 119.2 mm
- Height (inches)
- 4.693 inch
- Depth
- 113.6 mm
- Depth (inches)
- 4.472 inch
- Net weight
- 170 g
Safety-Related Specifications Low Demand Mode
- Average Probability of Failure on Demand (PFD
- 1.58 x 10-4 (Tproof = 1 year), 3.17 x 10-4 (Tproof = 2 years), 7.92 x 10-4 (Tproof = 5 years)
Connection Data
- Type of connection
- Screw connection
- Tightening torque, min.
- 0.4 Nm
- Tightening torque, max.
- 0.6 Nm
- Clamping range, rated connection
- 2.5 mm²
- Clamping range, min.
- 0.25 mm²
- Clamping range, max.
- 2.5 mm²
- Wire connection cross section AWG, min.
- AWG 26
- Wire connection cross section AWG, max.
- AWG 12
Rated Data Ul
- UL certificate
- E337701.pdf
Safety-Related Basic Specifications
- Demand mode
- High
- Demand rate
- 1,000 s
- Description of the "safe state"
- High impedance
- Device type
- B
- Diagnostic test interval
- 10 s
- Hardware fault tolerance (HFT)
- 0
- Mean Time To Repair (MTTR)
- 8 h
- Safe Failure Fraction (SFF)
- 92 %
- T
- 5 Years
- Total failure rate for dangerous detected failures (»
- 135 FIT
- Total failure rate for dangerous undetected failures (»
- 36 FIT
- Total failure rate for safe detected failures (»
- 0 FIT
- Total failure rate for safe undetected failures (»
- 275 FIT
- Safety category
- SIL 2
- Probability of outage PFH
- 3.62 x 10-8 h-1
Tender Specification Sheets
- Long specification
- Ex isolating switch amplifiers for Namur sensors,1-channel isolating switch amplifiers in 22.5 mm width with an external power supply,to transmit and isolate Namur sensor signals from Ex zones 0,1, 2 into the safe zone. On the output side there is an NPN switching transistor and a common alarm contact (relay/"a" contact) for status or error messages.The component can be configured using standard FDT/DTM software.Add-on housing for TS35 DIN rail installationDimensions: L/W/H 119.2/ 22.5/ 113.6screw connection/ nominal cross-section 2.5 mm2Protection degree: IP20 Input NAMUR sensor according to EN 60947 8 VDC / 8 mA sensor power supply 0 to 5 kHz input frequency wire-break detectionOutput NPN transistor 30 VDC @ 80 mA 5 kHz switching frequency < 2, 5 VDC SpannungsfallAlarm output relay 1 NO contact 250 VAC / 30 VDC @ 2A safe zone 32 VAC @ 0.5 A/ 32 VDC @ 1 A zone 2Auxiliary power 19...31.2 VDCPower loss approx. 1.8 WAmbienttemperature range -20°C to +60°CSecure isolation EN 61010, 3-way isolation up to 2.6 kV AC/DC of all circuits against each otherWorking voltage 300 V AC/DC at overvoltage category II and pollution degree 2Approvals cULus, ATEX IECEX, FM ATEX marking II 3 G ExnA nC IIC T4 ATEX characteristic data U0 = 10, 6 V DC I0 = 12 mA DC P0 = 32 WType ACT20X-HDI-2SDO-2SDO-S
- Short specification
- Ex isolating switch amplifiers for Namur sensors,1-channel isolating switch amplifiers in 22.5 mm width with an external power supply,to transmit and isolate Namur sensor signals from Ex zones 0,1, 2 into the safe zone. On the output side there is an NPN switching transistor and a common alarm contact (relay/"a" contact) for status or error messages.The component can be configured using standard FDT/DTM software.
Alarm Output
- Alarm function
- Line interruption at the input, Short circuit at input, No supply voltage, Device error
- Type
- Relay, 1 NC (voltage-free)
- Nominal switching voltage
- ‰¤ 125 V AC / 110 V DC (safe area)‰¤ 32 V AC / 32 V DC (zone 2)
- Continuous current
- ‰¤ 0.5 A AC / 0.3 A DC (safe zone), ‰¤ 0,5 A AC / 1 A DC (zone 2)
- Power rating
- ‰¤ 62.5 VA / 32 W (safe area)‰¤ 16 VA / 32 W (Zone 2)
Classifications
- ETIM 6.0
- EC002653
- ETIM 7.0
- EC002653
- EClass 9.0
- 27-21-01-20
- EClass 9.1
- 27-21-01-20
- EClass 10.0
- 27-21-01-20
- UNSPSC
- 30-21-18-01
Output
- Influence of load resistance
- ‰¤ 0.01% of span / 100 ©
Product Information
- Product information
- Weidmüller provides an extended guarantee period of 36 months for this device.
Environmental Product Compliance
- REACH SVHC
- Lead 7439-92-1
Data For Ex Applications (Atex)
- Voltage U
- 10.6 V DC
- Current I
- 12 mA DC
- Power P
- 32 mW
- Marking
- II (1) G [Ex ia Ga] IIC/IIB/IIA, II (1) D [Ex ia Da] IIIC, I (M1) [Ex ia Ma] I
- Installation location
- Device installed in safe area, zone 2
Insulation Coordination
- EMC standards
- DIN EN 61326, NE 21
- Insulation voltage
- 2.6 kV (input / output)
- Rated voltage
- 300 V
Input Ex
- Input frequency
- 0...5 kHz
- Input resistance
- 1 k©
- Output signal in case of wire break
- < 0.1 mA, > 6.5 mA (in case of wire break)
- Pulse duration
- > 0.1 ms
- Resistance
- Series resistor 750©, Parallel resistor 15k©
- Sensor
- NAMUR sensor, according to EN60947, switch with or without RS, RP
- Sensor supply
- 8 V DC / 8 mA
- Trigger level high
- > 2.1 mA
- Trigger level low
- < 1.2 mA
- Type
- intrinsically safe circuit
Temperatures
- Humidity
- 0...95 % (no condensation)
- Operating temperature, max.
- 60 °C
- Operating temperature, min.
- -20 °C
- Storage temperature, max.
- 85 °C
- Storage temperature, min.
- -20 °C
- Operating temperature
- -20°C...60°C
- Storage temperature
- -20°C...85°C
Ratings Iecex/Atex/Cul
- ATEX certificate
- 09ATEX0168X.pdf
- IEC Ex certificate
- IECEx certification
- Certificate No. (ATEX)
- KEMA09ATEX0168X
- Certificate No. (IECEX)
- IECEXKEM09.0072X
- Certificate no. (cULus)
- E337701
General Specifications
- Configuration
- With FDT/DTM software
- Voltage supply
- 19.2€¦31.2 V DC
- Type of connection
- Screw connection
- NAMUR supply
- 8 V DC / 8 mA
- Power consumption
- ‰¤ 1.1 W
- Protection degree
- IP20
- Humidity
- 0...95 % (no condensation)
Returns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
Recently Viewed Products
- Choosing a selection results in a full page refresh.