Subscribe To Our Newsletter
Get the latest updates on new products and upcoming sales
WEIDMULLER 8638950000
Additional Information Part Number 8638950000 General Data Accuracy Slow/fast step response time: 0.5% of measuring range or 0.5 K/ 1% of measuring range or 1 K Configuration DIP switch Current-carrying capacity of cross-connect. ¤ 2 A Galvanic isolation 3-way isolator Input/Output configurable Linearity Yes Power consumption 880...980...1030 mW at IOUT = 20 mA Rail TS 35 Step response time Fast:...
Couldn't load pickup availability
Additional Information
- Part Number
- 8638950000
General Data
- Accuracy
- Slow/fast step response time: 0.5% of measuring range or 0.5 K/ 1% of measuring range or 1 K
- Configuration
- DIP switch
- Current-carrying capacity of cross-connect.
- ¤ 2 A
- Galvanic isolation
- 3-way isolator
- Input/Output
- configurable
- Linearity
- Yes
- Power consumption
- 880...980...1030 mW at IOUT = 20 mA
- Rail
- TS 35
- Step response time
- Fast: 1.2 s/ slow: 2.2 s
- Temperature coefficient
- span 100 K: ¤ 250 ppm/K of measuring range40 K <= span <= 100 K: <= 400 ppm/K of measuring range
- Voltage supply
- 24 V DC ± 20 %
Probability Of Failure
- MTTF
- 267 Years
Approvals
- Approvals
- CE, CULUS, CULUSEX, EAC
- ROHS
- Conform
- UL File Number Search
- E141197
Dimensions And Weights
- Length
- 92.4 mm
- Length (inches)
- 3.638 inch
- Width
- 17.5 mm
- Width (inches)
- 0.689 inch
- Depth
- 112.4 mm
- Depth (inches)
- 4.425 inch
- Weight
- 100 g
- Net weight
- 103.5 g
Connection Data
- Type of connection
- Screw connection
- Stripping length, rated connection
- 7 mm
- Tightening torque, min.
- 0.4 Nm
- Tightening torque, max.
- 0.5 Nm
- Clamping range, rated connection
- 2.5 mm²
- Clamping range, min.
- 0.5 mm²
- Clamping range, max.
- 2.5 mm²
Tender Specification Sheets
- Long specification
- RTD measurement isolating transformer; configured with DIP switchesRTD measurement isolating transformer in 17.5 mm width with external power supply,for transmitting and isolating 2-/3-/-4-wire Cu10/ 25/ 50/ 100 signals. Analogue DC signals 0(4) to 20 mA / 0 to 10 V are available on the output side.Internal potentiometer is used for zero and span calibrations.Add-on housing for TS35 rail mountingDimensions: L/W/H 92.4/ 17.5/ 112.4 mmScrew connection / Nominal cross-section 2.5 mm2Protection degree: IP 20 Input3-/4-wire Cu 10, Cu 25, Cu 50, Cu 100Output 0/4...20 mA 0...10 VLoad resistance < 600 Ohm/ Strom/> 1 kOhm/ voltageTransmission error < 0,8% v. E. (RTD) typ. 200 ppm /°CAuxiliary power 24 VDC +/- 25 %Power loss approx. 0.9 WAmbient temperature range 0°C...+55°CIsolation EN 50178, 3-way isolation up to 4 kV AC/DC of all circuits against each otherTest voltage2 kV input against output against auxiliary powerRated voltage 300 V AC/DC at overvoltage category III and pollution degree 2Approvals cULus, cULusEXType WAS5 PRO RTD Cu
- Short specification
- RTD measurement isolating transformer; configured with DIP switchesRTD measurement isolating transformer in 17.5 mm width with external power supply,for transmitting and isolating 2-/3-/-4-wire Cu10/ 25/ 50/ 100 signals. Analogue DC signals 0(4) to 20 mA / 0 to 10 V are available on the output side.Internal potentiometer is used for zero and span calibrations.
Input
- Number of inputs
- 1
- Sensor
- 3-/4-wired, Cu 10. Cu 25, Cu 50. Cu 100
- Line resistance in measuring circuit
- 5 © Cu 10; 15 © Cu 25; 25 © Cu 50; 50 © Cu 100
- Temperature input range
- Adjustable from -200...+260°C
Classifications
- ETIM 6.0
- EC002919
- ETIM 7.0
- EC002919
- EClass 9.0
- 27-21-01-29
- EClass 9.1
- 27-21-01-29
- EClass 10.0
- 27-21-01-29
- UNSPSC
- 30-21-18-01
Output
- Number of outputs
- 1
- Output voltage, note
- 0...10 V
- Output current
- 0...20 mA, 4...20 mA
- Wire break detection
- LED flashing (output value: > 20 mA, >10 V)
- Fine adjustment
- ± 12.5% of FSR
- Load impedance voltage
- 1 k©
- Load impedance current
- ¤ 600 ©
- Offset voltage
- max. 0.05 V
- Offset current
- max. 100 µA
- Status indicator
- Module active: LED on/ wire breakage: LED flashing/Error: LED off
Product Information
- Product information
- This product will soon be replaced by a new product.Please do not use with new systems. Please contact our technical support.
Environmental Product Compliance
- REACH SVHC
- Lead 7439-92-1
Insulation Coordination
- Clearance & creepage distances
- 3 mm
- EMC standards
- EN 55011, EN 61000-6
- Galvanic isolation
- 3-way isolator
- Impulse withstand voltage
- 4 kV
- Insulation voltage
- 2 kVeff / 5 s
- Insulation voltage input or output/rail
- 4 kVeff / 1 min.
- Insulation voltage input or output/supply
- 2 kVeff / 5 s
- Pollution severity
- 2
- Rated voltage
- 300 V
- Surge voltage category
- III
Temperatures
- Operating temperature, max.
- 55 °C
- Operating temperature, min.
- 0 °C
- Storage temperature, max.
- 85 °C
- Storage temperature, min.
- -20 °C
- Operating temperature
- 0°C...55°C
- Storage temperature
- -20°C...85°C
Ratings Iecex/Atex/Cul
- Certificate no. (cULus)
- E141197
Returns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
Recently Viewed Products
- Choosing a selection results in a full page refresh.