WEIDMULLER 8560720000

Additional Information

Part Number

8560720000

General Data

Accuracy

Type K & J: -150°C¦1200°C ±(3°C + 0,1% of range), Type T: -150°C¦400°C ±(3°C + 0,1% of range), Type E: -150°C¦1000°C ±(3°C + 0,1% of range), Type N: -150°C¦1300°C ±(3°C + 0,1% of range), Type R & S: 200°C¦1760°C ±(6°C + 0,1% of range), Type B: 500°C¦1820°C ±(6°C + 0,1% of range)

Configuration

DIP switch

Current-carrying capacity of cross-connect.

‰¤ 2 A

Galvanic isolation

3-way isolator

Input/Output

configurable

Linearity

Yes

Power consumption

800...850...950 mW at IOUT = 20 mA

Rail

TS 35

Step response time

without filter: max. 1.4 s; with filter: max. 7.5 s

Voltage supply

24 V DC ± 20 %

Probability Of Failure

MTTF

270 Years

Approvals

Approvals

CE, CULUS, CULUSEX, EAC, GERMLLOYD

ROHS

Conform

UL File Number Search

E141197

Dimensions And Weights

Length

92.4 mm

Length (inches)

3.638 inch

Width

17.5 mm

Width (inches)

0.689 inch

Depth

112.4 mm

Depth (inches)

4.425 inch

Weight

100 g

Net weight

128.8 g

Connection Data

Type of connection

Screw connection

Stripping length, rated connection

7 mm

Tightening torque, min.

0.4 Nm

Tightening torque, max.

0.5 Nm

Clamping range, rated connection

2.5 mm²

Clamping range, min.

0.5 mm²

Clamping range, max.

2.5 mm²

Tender Specification Sheets

Long specification

TC temperature measurement isolating transformer; configured with DIP switches TC- temperature measurement isolating transformer in 17.5 mm width with external power supply,for transmitting thermocouples (insulated version) types K, J, T, E, N, R, S and B according to IEC 584. Standard DC signals 0(4) to 20 mA / 0 to 10 V are available on the output side.Internal cold-junction compensation Potentiometer for zero/span compensationAdd-on housing for TS35 rail mountingDimensions: L/W/H 92.4/ 17.5/ 112.4 mmScrew connection / Nominal cross-section 2.5 mm2Protection degree: IP 20  Input                         TC Type Type K, J, T, E, N, R, S                                                                                                                                                      Output                                             0/4...20 mA                                      0...10 V Load resistance             < 600 Ohm/ Strom/> 1 kOhm/ voltageTransmission error               0.2...0.3 0.8 % of input (depending on TC Type)Auxiliary power                                      24 VDC +/- 25 %Power loss approx. 0.9 W Ambient temperature range 0°C...+55°C Isolation                                EN 50178, 3-way isolation up to 4 kV AC/DC of all circuits against each otherTest voltage                               2 kV input against output against auxiliary powerRated voltage                                          300 V AC/DC at overvoltage category III and pollution degree 2 Approvals cULus, cULusEXType                                                             WAS5 PRO Thermo

Short specification

TC temperature measurement isolating transformer; configured with DIP switches TC- temperature measurement isolating transformer in 17.5 mm width with external power supply,for transmitting thermocouples (insulated version) types K, J, T, E, N, R, S and B according to IEC 584. Standard DC signals 0(4) to 20 mA / 0 to 10 V are available on the output side.Internal cold-junction compensationPotentiometer is used for zero and span calibrations.

Input

Number of inputs

1

Sensor

Thermo element (IEC 584) type: K,J,T,E,N,R,S,B

Line resistance in measuring circuit

50 ©

Temperature input range

-200...+1820°C

Classifications

ETIM 6.0

EC002919

ETIM 7.0

EC002919

EClass 9.0

27-21-01-29

EClass 9.1

27-21-01-29

EClass 10.0

27-21-01-29

UNSPSC

31-12-10-07

Output

Number of outputs

1

Output voltage, note

0...10 V

Output current

0...20 mA, 4...20 mA

Wire break detection

LED flashing (output value: > 20 mA, >10 V)

Fine adjustment

± 5% (switchable)

Cold junction compensation

Yes

Load impedance voltage

‰¥ 1 k©

Load impedance current

‰¤ 600 ©

Offset voltage

max. 0.05 V

Offset current

max. 100 µA

Status indicator

Module active: LED on/ wire breakage: LED flashing/Error: LED off

Product Information

Product information

This product will soon be replaced by a new product.Please do not use with new systems. Please contact our technical support.

Environmental Product Compliance

REACH SVHC

Lead 7439-92-1

Insulation Coordination

Clearance & creepage distances

‰¥ 3 mm

EMC standards

EN 55011, EN 61000-6

Galvanic isolation

3-way isolator

Impulse withstand voltage

4 kV

Insulation voltage

2 kVeff / 5 s

Insulation voltage input or output/rail

4 kVeff / 1 min.

Insulation voltage input or output/supply

2 kVeff / 5 s

Pollution severity

2

Rated voltage

300 V

Surge voltage category

III

Temperatures

Operating temperature, max.

55 °C

Operating temperature, min.

0 °C

Storage temperature, max.

85 °C

Storage temperature, min.

-20 °C

Operating temperature

0°C...55°C

Storage temperature

-20°C...85°C

Ratings Iecex/Atex/Cul

Certificate no. (cULus)

E141197