WEIDMULLER 8516560000

Additional Information

Part Number

8516560000

General Data

Configuration

DIP switch, Potentiometer

Current consumption

8.3 mA (relay not triggered)/ 24 mA (relay triggered)

Current-carrying capacity of cross-connect.

? 2 A

Galvanic isolation

3-way isolator

Input/Output

1/ 5/ 10 A AC / relay

Power consumption

? 0.8 W

Rail

TS 35

Step response time

typ. 700 ms

Temperature coefficient

? 800 ppm/K

Voltage supply

24 V DC ± 10 %

Probability Of Failure

MTTF

787 Years

Approvals

Approvals

CE, CULUS, EAC

ROHS

Conform

UL File Number Search

E141197

Dimensions And Weights

Length

92.4 mm

Length (inches)

3.638 inch

Width

22.5 mm

Width (inches)

0.886 inch

Depth

112.4 mm

Depth (inches)

4.425 inch

Weight

150 g

Net weight

116.9 g

Output (Digital)

Hysteresis

5 % or 10 % of threshold value

Max. switching voltage, DC

60 V

Max. switching voltage, AC

250 V

Continuous current

3 A

Connection Data

Wire connection method

Screw connection

Type of connection

Screw connection

Clamping range, rated connection

2.5 mm²

Clamping range, min.

0.5 mm²

Clamping range, max.

2.5 mm²

Tender Specification Sheets

Long specification

Limit-value monitoring component   for AC currents up to 10A with relay outputand electrical isolationlimit-value monitoring component in 22.5 mm width for recording 50/ 60 Hz ACcurrents 0...1 A / 0...5 A / 0...10 A. A relay contact (CO)with a switching capacity of 750 VA is available on the output side.Input range can be selected using DIP switches. Switching threshold is adjustable between 10...90 % using the potentiometer on the front side. The 24 VDC power is supplied over the input circuit.The input and outputs are designed with 4 kV of electrical isolation.Add-on housing for TS35 rail mountingDimensions: L/W/H 92.4/ 22.5/ 112.4 mmScrew connection / Nominal cross-section 2.5 mm2Protection degree: IP 20   Input                         0...1 A / 0...5 A / 0...10 A AC switchable                                      50 / 60 Hz // transformer basedVoltage of measuring circuit 250 V ACOutput                                             Relay / COSwitching current 3 ASwitching voltage 6... 250 V AC / 6...60 V DCSwitching threshold 10...90 % via potentiometerHysteresis                     5 % or 10 %  . Temperature coefficient   < 800 ppm KStep response time typ. 700 msAuxiliary power                                     24 VDC +/- 10 % via output circuitAmbient temperature range 0°C...+50°C Secure isolation                   EN 50178, 2-way isolation up to 4 kVTest voltage                               4 kVeff / 5s input against outputRated voltage                                          300 V AC/DC at overvoltage category III and pollution degree 2Approvals cULusType                                                             WAS2 CMR 1/5/10A ac

Short specification

Limit-value monitoring component  for AC currents up to 10A with relay output and electrical isolationlimit-value monitoring component in 22.5 mm width for recording 50/ 60 Hz AC currents 0...1 A / 0...5 A / 0...10 A.  A relay contact (CO) with a switching capacity of 750 VA is available on the output side. Input range can be selected using DIP switches. Switching threshold adjustable between 10...90 % using the front-side potentiometer. The 24 VDC power is supplied over the input circuit. The input and output have 4 kV of electrical isolation.

Input

Number of inputs

1

Input current

0...1 A AC/ 0...5 A AC/ 0...10 A AC

Input frequency

50...60Hz

Classifications

ETIM 6.0

EC002653

ETIM 7.0

EC002653

EClass 9.0

27-21-01-20

EClass 9.1

27-21-01-20

EClass 10.0

27-21-01-20

UNSPSC

30-21-18-01

Output

Number of outputs

1

Contact assembly

1 CO contact

Switching thresholds

Adjustable 10...100% with front potentiometer

Status indicator

Green LED

Product Information

Product information

This product will soon be replaced by a new product.Please do not use with new systems. Please contact our technical support.

Environmental Product Compliance

REACH SVHC

Lead 7439-92-1

Insulation Coordination

Clearance & creepage distances

? 3 mm

EMC standards

EN 55011, EN 61000-6

Galvanic isolation

3-way isolator

Impulse withstand voltage

4 kV

Insulation voltage

4 kVeff / 5 s

Pollution severity

2

Rated voltage

300 V

Surge voltage category

III

Temperatures

Operating temperature, max.

50 °C

Operating temperature, min.

0 °C

Storage temperature, max.

70 °C

Storage temperature, min.

-20 °C

Operating temperature

0°C...50°C

Storage temperature

-20°C...70°C

Ratings Iecex/Atex/Cul

Certificate no. (cULus)

E141197