WEIDMULLER 8445050000

Additional Information

Part Number

8445050000

General Data

Accuracy

± 0.2 % of final value

Configuration

none

Current consumption

< 20 mA @ IOUT = 10 mA

Current-carrying capacity of cross-connect.

‰¤ 2 A

Galvanic isolation

2-way isolator

Input/Output

4...20 mA/ 0...10 V

Rail

TS 35

Step response time

‰¤ 30 ms (typ. 20 ms)

Temperature coefficient

‰¤ 250 ppm/K of final value

Voltage supply

24 V DC ± 20 %

Approvals

Approvals

CE, CSA, CULUS

ROHS

Conform

UL File Number Search

E141197

Dimensions And Weights

Length

92.4 mm

Length (inches)

3.638 inch

Width

12.5 mm

Width (inches)

0.492 inch

Depth

112.4 mm

Depth (inches)

4.425 inch

Net weight

109 g

Connection Data

Type of connection

Tension-clamp connection

Stripping length, rated connection

7 mm

Clamping range, rated connection

1.5 mm²

Clamping range, min.

0.5 mm²

Clamping range, max.

2.5 mm²

Tender Specification Sheets

Long specification

Standard signal isolating converter, 2-way isolation1-channel signal isolating converter in 12.5 mm width with output-sidepower supply for transmitting and isolating analogue 4...20 mADC current signals. The input circuit is powered by the current loop.0...10 V are available on the output side.Add-on housing for TS35 rail mountingDimensions: L/W/H 92.4/ 12.5/ 112.4 mmTension-clamp connection / Nominal cross-section 1.5 mm2Protection degree: IP 20   Input                         4...20 mA / current-loop poweredOutput                                             0...10 VApparent resistance at output > 1 kOhmTransmission error              < 0,2% v. E. Limit frequency 15 HzAuxiliary power                                     24 VDC +/- 20 %Ambient temperature range 0°C...+55°CSecure isolation                   EN 50178, 2-way isolation up to 4 kV AC/DCTest voltage                               4 kV input against outputRated voltage                                          300 V AC/DC at overvoltage category III and pollution degree 2Approvals cULusEX, cULus, CSA Type                                                            WAZ4 CCC DC 4-20/0-10V

Short specification

Standard signal isolating converter, 2-way isolation1-channel signal isolating converter in 12.5 mm width with output-side power supply for transmitting and isolating analogue 4...20 mA DC current signals. The input circuit is powered by the current loop.0...10 V are available on the output side.

Input

Number of inputs

1

Input current

4...20 mA

Voltage drop

Approx. 5.6 V at 20 mA

Output (Analogue)

Load resistance voltage

‰¥ 1 k©

Output voltage

0...10 V

Classifications

ETIM 6.0

EC002653

ETIM 7.0

EC002653

EClass 9.0

27-21-01-20

EClass 9.1

27-21-01-20

EClass 10.0

27-21-01-20

UNSPSC

31-12-10-07

Output

Number of outputs

1

Output voltage, note

0...10 V

Cut-off frequency (-3 dB)

‰¥ 15 Hz (typ. 20 Hz)

Load impedance voltage

‰¥ 1 k©

Product Information

Product information

This product will soon be replaced by a new product.Please do not use with new systems. Please contact our technical support.

Environmental Product Compliance

REACH SVHC

Lead 7439-92-1

Insulation Coordination

Clearance & creepage distances

‰¥ 3 mm

EMC standards

EN 55011, EN 61000-6

Galvanic isolation

2-way isolator

Impulse withstand voltage

4 kV

Insulation voltage

1.2 kVeff / 5 s

Insulation voltage input or output/rail

4 kVeff / 1 min.

Insulation voltage input or output/supply

4 kVeff / 1 min.

Pollution severity

2

Rated voltage

300 V

Surge voltage category

III

Temperatures

Humidity

40°C / 93 % rel. humidity, no condensation

Operating temperature, max.

55 °C

Operating temperature, min.

0 °C

Storage temperature, max.

85 °C

Storage temperature, min.

-20 °C

Operating temperature

0°C...55°C

Storage temperature

-20°C...85°C

Ratings Iecex/Atex/Cul

Certificate no. (cULus)

E141197