Subscribe To Our Newsletter
Get the latest updates on new products and upcoming sales
WEIDMULLER 2456090000
Additional Information Part Number 2456090000 Probability Of Failure MTBF 207 Years SIL PAPER SIL certificate SIL in compliance with IEC 61508 2 Digital Output Switching capacity 500 VA / 60 W (safe area), 16 VA / 60 W (zone 2) Type Relay, 1 NC contact, Switching frequency 20 Hz Nominal switching voltage ¤ 250 V AC / 30 V DC (safe...
Couldn't load pickup availability
Additional Information
- Part Number
- 2456090000
Probability Of Failure
- MTBF
- 207 Years
- SIL PAPER
- SIL certificate
- SIL in compliance with IEC 61508
- 2
Digital Output
- Switching capacity
- 500 VA / 60 W (safe area), 16 VA / 60 W (zone 2)
- Type
- Relay, 1 NC contact, Switching frequency 20 Hz
- Nominal switching voltage
- ¤ 250 V AC / 30 V DC (safe area) ¤ 32 V AC / 32 V DC (zone 2)
- Continuous current
- ¤ 2 A AC/DC (safe area, Zone 2 area)
- Function
- Output = input, direct or inverse (configurable)
Approvals
- Approvals
- DNV GL, EAC
- ROHS
- Conform
Dimensions And Weights
- Width
- 22.5 mm
- Width (inches)
- 0.886 inch
- Height
- 127.3 mm
- Height (inches)
- 5.012 inch
- Depth
- 113.6 mm
- Depth (inches)
- 4.472 inch
- Net weight
- 192 g
Safety-Related Specifications Low Demand Mode
- Average Probability of Failure on Demand (PFD
- 2.04 x 10-4 (Tproof = 1 year), 4.08 x 10-4 (Tproof = 2 years), 1.02 x 10-4 (Tproof = 5 years)
- Safe Failure Fraction (SFF)
- 90 %
Connection Data
- Type of connection
- PUSH IN
- Wire connection cross section AWG, min.
- AWG 26
- Wire connection cross section AWG, max.
- AWG 14
- Wire cross-section, solid, min.
- 0.2 mm²
- Wire cross-section, solid, max.
- 2.5 mm²
- Wire connection cross-section, finely stranded, min.
- 0.2 mm²
- Wire connection cross section, finely stranded, max.
- 2.5 mm²
- Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
- 0.2 mm²
- Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
- 2.5 mm²
Safety-Related Basic Specifications
- Demand mode
- High
- Demand rate
- 1,000 s
- Demand response time
- < 10 ms (relay output)
- Description of the "safe state"
- de-energized (relay output)
- Device type
- B
- Diagnostic test interval
- 10 s
- Hardware fault tolerance (HFT)
- 0
- Mean Time To Repair (MTTR)
- 8 h
- Relay lifetime
- 100000 times
- Safe Failure Fraction (SFF)
- 90 %
- T
- 4 Years
- Total failure rate for dangerous detected failures (»
- 130 FIT
- Total failure rate for dangerous undetected failures (»
- 46 FIT
- Total failure rate for safe detected failures (»
- 0 FIT
- Total failure rate for safe undetected failures (»
- 289 FIT
- Safety category
- SIL 2
- Probability of outage PFH
- 4.66 x 10-8 h-1
Alarm Output
- Alarm function
- Line interruption at the input, Short circuit at input, No supply voltage, Device error
- Type
- Relay, 1 NC (voltage-free)
- Nominal switching voltage
- ¤ 125 V AC / 110 V DC (safe area) ¤ 32 V AC / 32 V DC (zone 2)
- Continuous current
- ¤ 0.5 A AC / 0.3 A DC (safe zone), ¤ 0,5 A AC / 1 A DC (zone 2)
- Power rating
- ¤ 62.5 VA / 32 W (safe area) ¤ 16 VA / 32 W (Zone 2)
Classifications
- ETIM 6.0
- EC002653
- ETIM 7.0
- EC002653
- EClass 9.0
- 27-21-01-20
- EClass 9.1
- 27-21-01-20
- EClass 10.0
- 27-21-01-20
Environmental Product Compliance
- REACH SVHC
- Lead 7439-92-1
Data For Ex Applications (Atex)
- Voltage U
- 10.6 V DC
- Current I
- 12 mA DC
- Power P
- 32 mW
- Marking
- II (1) G [Ex ia Ga] IIC/IIB/IIA, II (1) D [Ex ia Da] IIIC, I (M1) [Ex ia Ma] I
- Installation location
- Device installed in safe area, zone 2
Insulation Coordination
- EMC standards
- DIN EN 61326, NE 21
- Insulation voltage
- 2.6 kV (input / output)
- Rated voltage
- 300 V
Input Ex
- Input frequency
- < 20 Hz
- Input resistance
- 1 k©
- Output signal in case of wire break
- < 0.1 mA, > 6.5 mA (in case of wire break)
- Pulse duration
- > 0.1 ms
- Resistance
- RP = 750 © / RS = 15k©
- Sensor
- NAMUR sensor, according to EN60947, switch with or without RS, RP
- Sensor supply
- 8 V DC / 8 mA
- Trigger level high
- > 2.1 mA
- Trigger level low
- < 1.2 mA
- Type
- intrinsically safe circuit
Temperatures
- Humidity
- 0...95 % (no condensation)
- Operating temperature, max.
- 60 °C
- Operating temperature, min.
- -20 °C
- Storage temperature, max.
- 85 °C
- Storage temperature, min.
- -20 °C
- Operating temperature
- -20 °C...60 °C
- Storage temperature
- -20 °C...85 °C
General Specifications
- Configuration
- With FDT/DTM software
- Voltage supply
- 19.2€¦31.2 V DC
- Type of connection
- PUSH IN
- NAMUR supply
- 8 V DC / 8 mA
- Power consumption
- ¤1.9 W
- Protection degree
- IP20
- Humidity
- 0...95 % (no condensation)
Returns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
Recently Viewed Products
- Choosing a selection results in a full page refresh.