WEIDMULLER 1510240000

Additional Information

Part Number

1510240000

General Data

Accuracy

< 0.75 % FSR

Configuration

With FDT/DTM software, via gateway (ACT20C-GTW-100-MTCP-S), Addressing via DIP switches

Galvanic isolation

4-way isolator;, between input �„ output �„ supply �„ relay

Power consumption, max.

2.2 W

Rail

TS 35

Step response time

< 300 ms

Temperature coefficient

typ. 0.04 % / K, max. 0.09 % / K

Voltage supply

via the system bus

Probability Of Failure

MTTF

130 Years

Approvals

Approvals

CULUS, DNV GL, EAC

ROHS

Conform

UL File Number Search

E141197

Communication

Configuration

With FDT/DTM software, via gateway (ACT20C-GTW-100-MTCP-S), Addressing via DIP switches

Interface

Communication via CH20M rail bus with gateway (ACT20C-GTW-100-MTCP-S)

Dimensions And Weights

Width

22.5 mm

Width (inches)

0.886 inch

Height

117.2 mm

Height (inches)

4.614 inch

Depth

113.6 mm

Depth (inches)

4.472 inch

Weight

180 g

Net weight

154 g

Output (Digital)

Type

Relay, 1 CO contact, Process alarms (4x) with hysteresis, with alarm delay (configurable) 0¦180 s

Max. switching voltage, DC

24 V

Max. switching voltage, AC

250 V

Rated switching current

6 A

Connection Data

Type of connection

Screw connection

Tightening torque, min.

0.5 Nm

Tightening torque, max.

3.5 Lb In

Clamping range, rated connection

1.5 mm²

Clamping range, min.

0.5 mm²

Clamping range, max.

2.5 mm²

Wire connection cross section AWG, min.

AWG 30

Wire connection cross section AWG, max.

AWG 14

Wire cross-section, solid, min.

0.5 mm²

Wire cross-section, solid, max.

2.5 mm²

Input

Input signal

Current-carrying cable in feed-through hole, Diameter 10.5 mm

Input measurement range

configurable, 0¦5/10 A AC (RMS) or DC

Input frequency

AC: 15¦700 Hz

Output (Analogue)

Load resistance current

‰¤ 600 ©

Load resistance voltage

‰¥ 10 k©

Output current

Adjustable, 0...20 mA, 4...20 mA, -20¦+20 mA

Output voltage

Adjustable, 0...10 V, 2¦10 V, 0...5 V, 1...5 V, -5¦+5 V, -10...+10 V

Type (analogue output)

Voltage and current output (configurable)

Classifications

ETIM 6.0

EC002475

ETIM 7.0

EC002475

EClass 9.0

27-21-01-23

EClass 9.1

27-21-01-23

EClass 10.0

27-21-01-23

Product Information

Product information

The ACT20C-CMT-XX-AO-RC-S current measuring transducers from the ACT20C series measure and monitor DC and AC currents of up to 60 A. The True RMS method used allows for precise measurement, even in case of distorted current waveforms. The devices feature integrated limit value monitoring with an adjustable switching threshold, delay and hysteresis, as well as a relay output. Properties True RMS value measurement or arithmetic averaging (AA) measurement and contactless through-hole technologyLimit value monitoring for overcurrent or undercurrentRelay output by means of the open-circuit / closed-circuit principleInfinitely variable trigger delayOperational status and error display on a front panel LED and output signalling according to NE43, NE44, NE107Galvanic four-way insulation for secure isolation according to IEC/EN 61010-2-201:2013

Environmental Product Compliance

REACH SVHC

Lead 7439-92-1

Insulation Coordination

EMC standards

IEC 61326-1

Galvanic isolation

4-way isolator;, between input �„ output �„ supply �„ relay

Impulse withstand voltage

6.4 kV (1.2/50 µs)

Pollution severity

2

Rated voltage

300 V ACrms

Surge voltage category

III

Temperatures

Humidity

5...95 %, no condensation

Operating temperature, max.

60 °C

Operating temperature, min.

-25 °C

Storage temperature, max.

85 °C

Storage temperature, min.

-40 °C

Operating temperature

-25 °C...60 °C

Ambient temperature

-25 °C...+60 °C

Storage temperature

-40 °C...85 °C

Ratings Iecex/Atex/Cul

Certificate no. (cULus)

E141197