WEIDMULLER 1453210000

Additional Information

Part Number

1453210000

General Data

Accuracy

< 0.1 % of measuring range

Cold-junction compensation error

±1.0°C @ -20° C - 65°C

Configuration

With FDT/DTM software

Galvanic isolation

2-way isolator, between input/output

Rail

TS 35

Step response time

450 ms

Temperature coefficient

< 0.02°C of measuring range /°C

Voltage supply

Output loop powered, (10¦45 V)

Approvals

ROHS

Conform

Dimensions And Weights

Width

12.5 mm

Width (inches)

0.492 inch

Height

119.2 mm

Height (inches)

4.693 inch

Depth

113.6 mm

Depth (inches)

4.472 inch

Net weight

157 g

Output (Digital)

Type

Transistor, open collector

Rated switching current

20 mA

Rated switching voltage

‰¤ 30 V DC

Connection Data

Type of connection

Screw connection

Tightening torque, min.

0.4 Nm

Tightening torque, max.

0.6 Nm

Clamping range, rated connection

2.5 mm²

Clamping range, min.

0.5 mm²

Clamping range, max.

2.5 mm²

Wire connection cross section AWG, min.

AWG 26

Wire connection cross section AWG, max.

AWG 12

Input

Number of inputs

1

Type

Universal signal isolator / signal amplifier, thermocouple, RTD

Sensor

PT100 / 2-/3-/4-wire, PT1000/2-/3-/4-wire, PT200, N120, Thermocouples: B, E, J, K, L, N, R, S, T, U

Sensor supply

0.1 mA / 0.05 mA (depending on measuring range) @ RTD cable

Influence of the sensor cable resistance

5 © @ RTD- Kabel

Input voltage

configurable, ± 300 V DC (min. measurement range 100 V), 0...300 V AC (min. measurement range 100 V)

Input resistance, voltage

2 M©, > 10 M©

Input current

configurable, ± 5 A DC (min. measurement range 0.5 A)

Input resistance, current

40 ©

Input measurement range

PT100 -200¦+850°C, Thermocouple type J -100¦+1200°C, Thermocouple type K -200¦+1370°C, customerization

Cable-length compensation

< ±0.002 © per cable resistance ©

Resistance

0¦750 ©, 0¦1.5 k©, 0¦12 k©

Potentiometer

1.2¦500 k©

Classifications

ETIM 6.0

EC002653

ETIM 7.0

EC002653

EClass 9.0

27-21-01-20

EClass 9.1

27-21-01-90

EClass 10.0

27-21-01-20

Output

Type

Output-loop powered

Number of outputs

1

Output signal limit

Harmonics: <10 mV (peak to peak)

Output current

4...20 mA, 20¦4 mA, Current loop

Cold junction compensation

‰¤±1°C (-20°C¦60°C)

Load impedance current

typ. 700 © @ 24 V DC

Supply voltage (output)

via output current loop

Product Information

Product information

The ACT20P-UI-AO-DO-LP-X converts and isolates current, voltage, potentiometer and temperature sensor signals (mA, A, mV, V, potentiometer, RTD and TC). The transmit function between the input and output can be set via the configuration program either to predefined functions (x0.5, x, x2) or via a freely definable function table. The device is powered via the output current loop. Features Configuration and monitoring are performed via FDT/DTM-Software žWI-Managerœ. The active or passive signal inputs for RTD, TC, potentiometer, mV, V, mA and A are completely electrically isolated. The TC signal input has internal cold-junction compensation. Alarm output (for example, for limit monitoring, sensor error detection and more) 3-way galvanic isolation between input, output/supply and alarm output.

Environmental Product Compliance

REACH SVHC

Lead 7439-92-1

Insulation Coordination

Galvanic isolation

2-way isolator, between input/output

Impulse withstand voltage

4 kV (1.2/50 µs)

Insulation voltage

3.51 kV between input and output

Pollution severity

2

Rated voltage

300 Veff

Surge voltage category

III

Temperatures

Humidity

10¦90 %, no condensation

Operating temperature, max.

70 °C

Operating temperature, min.

-20 °C

Storage temperature, max.

70 °C

Storage temperature, min.

-20 °C

Operating temperature

-20°C...70°C

Ambient temperature

-20°C...+70°C

Storage temperature

-20°C...70°C