WEIDMULLER 1176040000

Additional Information

Part Number

1176040000

General Data

Accuracy

< 0.05 % of measuring range

Configuration

none

Galvanic isolation

2-way isolator

Power consumption, max.

0.5 W

Rail

TS 35

Step response time

‰¤ 5 ms

Temperature coefficient

‰¤±0.02 µA x (Δ °C x V supply) @ Tamb >; 25 °C

Voltage supply

Output loop powered

Approvals

Approvals

CULUS, DETNORVER, DNV GL, EAC, FMEX, IECEXKEM, KEMAATEX

ROHS

Conform

UL File Number Search

E337701

Dimensions And Weights

Width

6.1 mm

Width (inches)

0.24 inch

Height

112.5 mm

Height (inches)

4.429 inch

Depth

114.3 mm

Depth (inches)

4.5 inch

Net weight

80 g

Connection Data

Type of connection

Screw connection

Tightening torque, min.

0.4 Nm

Tightening torque, max.

0.6 Nm

Clamping range, rated connection

2.5 mm²

Clamping range, min.

0.5 mm²

Clamping range, max.

2.5 mm²

Wire connection cross section AWG, min.

AWG 30

Wire connection cross section AWG, max.

AWG 14

Rated Data Ul

UL certificate

E337701.pdf

Tender Specification Sheets

Long specification

Standard signal isolating amplifier1-channel signal isolating amplifier in 6.1 mm width output-loop powered,for transmitting and isolating analogue DC current signals 0/4...20 mA.Add-on housing for TS35 rail mountingDimensions: L/W/H 114.3/ 6.1/ 112.5 mmScrew connection / Nominal cross-section 2.5 mm2Protection degree: IP 20   Input                         0/4...20 mAOutput                                             0/4...20 mALoad resistance             < 600 OhmTransmission error             < 0,1 % v. E. Limit frequency 100 HzAuxiliary power                                     0/4...20 mA output current loopPower loss approx. 0.9 WAmbient temperature range -25 °C...+70 °C Isolation                                EN 61010-1, 2-way isolation up to 2.5 kV AC/DCTest voltage                               2.5 kV input against output against auxiliary powerRated voltage                                          300 V AC/DC at overvoltage category II and pollution degree 2Approvals cULus, FM Div2, ATEX Zone2, DNV, GLType                                                             ACT20M-CI-CO-OLP-S

Short specification

Standard signal isolating amplifier1-channel signal isolating amplifier in 6.1 mm width with output current loop feed,for transmitting and isolating analogue DC current signals from 0/4 to 20 mA.

Input

Number of inputs

1

Sensor

2-wire transmitter (without own power supply)

Sensor supply

6€¦35 V (@ 20 mA)

Input current

4€¦20mA

Voltage drop, current input

Typical 2.5 V

Classifications

ETIM 6.0

EC002653

ETIM 7.0

EC002653

EClass 9.0

27-21-01-20

EClass 9.1

27-21-01-20

EClass 10.0

27-21-01-20

Output

Number of outputs

1

Output current

4...20 mA

Cut-off frequency (-3 dB)

100 Hz

Load impedance current

‰¤600 Ω (channel 1 + 2), @ max 23mA

Supply voltage (output)

6€¦35 V

Product Information

Product information

The passive isolator ACT20M-CI-CO-OLP-S isolates standard analogue current signals. An analogue input current signal is linearly converted into an analogue output current signal and is galvanically isolated. Power is supplied through the output measuring circuit (output loop-powered).

Environmental Product Compliance

REACH SVHC

Lead 7439-92-1

Data For Ex Applications (Atex)

Marking

II 3 G Ex nA IIC T4 Gc

Insulation Coordination

EMC standards

IEC 61326-1, NE 21

Galvanic isolation

2-way isolator

Insulation voltage

2.5 kVeff /1 min.

Pollution severity

2

Rated voltage

300 Veff

Surge voltage category

II

Temperatures

Humidity

40 °C / 93 % rel. humidity, no condensation

Operating temperature, max.

70 °C

Operating temperature, min.

-25 °C

Storage temperature, max.

85 °C

Storage temperature, min.

-40 °C

Operating temperature

-25 °C...70 °C

Ambient temperature

-25 °C...+70 °C

Storage temperature

-40 °C...85 °C

Ratings Iecex/Atex/Cul

Certificate No. (ATEX)

KEMA10ATEX0183X

Certificate No. (IECEX)

IECEXKEM10.0090X

Certificate no. (cULus)

E337701