WEIDMULLER 1176020000

Additional Information

Part Number

1176020000

General Data

Accuracy

< 0.05 % of measuring range

Configuration

DIP switch

Galvanic isolation

3-way isolator

Power consumption, max.

1.2 W

Power consumption, typ.

0.84 W

Rail

TS 35

Step response time

‰¤ 7 ms

Temperature coefficient

‰¤ 0.01 % /°C

Voltage supply

24 V DC ± 30 %

Probability Of Failure

MTBF

181 Years

Approvals

Approvals

CE, CULUS, DETNORVER, DNV GL, EAC, FMEX, IECEXKEM, KEMAATEX

ROHS

Conform

UL File Number Search

E337701

Dimensions And Weights

Width

6.1 mm

Width (inches)

0.24 inch

Height

112.5 mm

Height (inches)

4.429 inch

Depth

114.3 mm

Depth (inches)

4.5 inch

Net weight

80 g

Connection Data

Type of connection

Screw connection

Tightening torque, min.

0.4 Nm

Tightening torque, max.

0.6 Nm

Clamping range, rated connection

2.5 mm²

Clamping range, min.

0.5 mm²

Clamping range, max.

2.5 mm²

Wire connection cross section AWG, min.

AWG 30

Wire connection cross section AWG, max.

AWG 14

Rated Data Ul

UL certificate

E337701.pdf

Tender Specification Sheets

Long specification

Universal standard signal splitter1-channel signal splitter in 6.1 mm width with external power supply,to transmit, isolate and split analogue DC current signals 0/4 to 20 mA and voltage signals 0/2 to 10 V // 0/1 to 5 V. Input and output signals can be configured with DIP switches.Add-on housing for TS35 rail mountingDimensions: L/W/H 114.3/ 6.1/ 112.5 mmScrew connection / Nominal cross-section 2.5 mm2Protection degree: IP 20   Input                         0/4...20 mA                                      0/2...10 V or 0/1...10 VOutput                                             0/4...20 mA                                       0/2...10 V or 0/1...5 VLoad resistance < 300 Ohm (Current)/ channel // > 10 kOhm/ voltageTransmission error               < 0,05 % v. E. Limit frequency 100 HzAuxiliary power                                     24 VDC +/- 30 %Power loss approx. 1.2 WAmbient temperature range -25°C...+70°CIsolation                                 EN 61010-1, 3-way isolation up to 2.5 kV AC/DC of all circuits against each otherTest voltage                               2.5 kV input against output against auxiliary powerRated voltage                                         300 V AC/DC at overvoltage category II and pollution degree 2Approvals cULus, FM Div2, ATEX Zone2, DNV, GLType                                                             ACT20M-AI-2AO-S

Short specification

Universal standard signal splitter1-channel signal splitter in 6.1 mm width with external power supply,to transmit, isolate and split analogue DC current signals 0/4...20 mA and voltage signals 0/2...10V // 0/1...5 V. I/O signals are configured with DIP switches.

Input

Number of inputs

1

Sensor

Voltage source, Current source, 2-wire transmitter (without own power supply)

Sensor supply

17¦28 V DC (@ 20 mA)

Input voltage

configurable, 0(2)¦10 V, 0(1)¦5 V

Input resistance, voltage

500 k©

Input current

configurable, 0...20 mA, 4¦20mA

Voltage drop, current input

< 1.5 V

Input resistance, current

70 ©

Voltage drop

<1,5 V

Classifications

ETIM 6.0

EC002653

ETIM 7.0

EC002653

EClass 9.0

27-21-01-20

EClass 9.1

27-21-01-20

EClass 10.0

27-21-01-20

Output

Number of outputs

2

Output voltage, note

configurable, 0(2)...10 V, 0(1)...5 V

Output current

Adjustable, 0...20 mA, 4...20 mA

Cut-off frequency (-3 dB)

100 Hz

Load impedance voltage

‰¥ 10 k©

Load impedance current

< 300 ©, per channel, @ max 23mA

Product Information

Product information

The configurable DC isolating amplifier ACT20M-AI-AO-S isolates and converts analogue standard signals. An analogue input signal is linearly converted into an analogue output signal and galvanically isolated. The input can also be operated as an active current loop (the loop current is supplied by the device). The power supply is galvanically isolated from the input and output (3-way isolation) by means of direct wiring or the Weidm¼ller rail bus. The configurable DC isolation amplifier ACT20M-AI-2AO-S offers the same functionality, but has 2 galvanically isolated outputs (4-way isolation).

Environmental Product Compliance

REACH SVHC

Lead 7439-92-1

Data For Ex Applications (Atex)

Marking

II 3 G Ex nA IIC T4 Gc

Insulation Coordination

EMC standards

IEC 61326-1, NE 21

Galvanic isolation

3-way isolator

Insulation voltage

2.5 kVeff /1 min.

Pollution severity

2

Rated voltage

300 Veff

Surge voltage category

II

Temperatures

Humidity

40°C / 93 % rel. humidity, no condensation

Operating temperature, max.

70 °C

Operating temperature, min.

-25 °C

Storage temperature, max.

85 °C

Storage temperature, min.

-40 °C

Operating temperature

-25°C...70°C

Ambient temperature

-25°C...+70°C

Storage temperature

-40°C...85°C

Ratings Iecex/Atex/Cul

Certificate No. (ATEX)

KEMA10ATEX0183X

Certificate No. (IECEX)

IECEXKEM10.0090X

Certificate no. (cULus)

E337701