WAGO 767-7401

Additional Information

Part Number

767-7401

UPC

4045454545260

Tariff Code

85389099990

Environmental Requirements

Ambient temperature (operation)

-25 É +60¡C

Ambient temperature (storage)

-40 É +85¡C

Protection type

IP67

Protection class

III

Operating altitude

?1000 É 2000 m; Air pressure: 1080 É 795 hPa

Relative humidity (without condensation)

95 %

Vibration resistance

5g per IEC 60068-2-6

Shock resistance

Short-term: 50g/11 ms/half-sine per IEC 60068-2-27; Long-term: 30g/6 ms/half-sine per IEC 60068-2-29

EMC immunity to interference

Per EN 61000-6-2

EMC emission of interference

Per EN 61000-6-4

Connection Data

Connection technology: inputs/outputs

4 x M12 socket; 5-pole; A-coded

Connection technology: field supply

1 x M12 plug; 4-pole; A-coded; 1 x M12 socket; 4-pole; A-coded

Connection technology: system supply

1 x M12 socket; 4-pole; A-coded; 1 x M12 plug; 4-pole; A-coded

Connection technology: system bus

1 x M12 socket, 5-pole, B-coded, shielded; 1 x M12 plug, 5-pole, B-coded, shielded

Connection requirement (permissible cable length)

30 m

Connection requirement (permissible cable type)

Analog outputs: unshielded

Physical Data

Width

50 mm / 1.969 inches

Height

35.7 mm / 1.406 inches

Depth

117 mm / 4.606 inches

Material Data

Color

Light gray

Housing material

Polyamide (PA), Makrolon (address switch cover), flammability per UL94-V0, halogen/silicon-free

Fire load

1.335 MJ

Weight

262.000 g

Conformity marking

CE

Encapsulation

Polyurethane (PUR), halogen/silicon-free

Technical Data

Number of analog outputs

4

Total number of channels (module)

4

Signal type

Voltage || Current

Signal type (current)

0 É 20 mADC; 4 É 20 mADC

Signal type (voltage)

0 É 10 VDC; -10 É +10 VDC

Signal type (configurable)

Yes

Actuator connection

4 x (2-wire, 3-wire, 4-wire); External shield via knurled nut

Resolution [bit]

16 bits

Process data width

8-byte data + status

Parameterizable functions

I/O diagnostics (per module): Short circuit/overload (actuator supply); Undervoltage (ULS + UA) || I/O diagnostics (per channel): Short circuit (voltage); Wire break (current) || Online simulation (per module): Diagnostics || Online simulation (per channel): Lock/Unlock; Simulation value: according to measurement range; Diagnostics || Measurement range (per channel): Parameterizable || Substitute value (per channel): 0 mA or 0 V / Substitute value according to measurement range || Substitute value strategy (per channel): Switch substitute value/Hold last value || Manual mode (per channel): On/Off || Manual mode value (by channel): Value

Short circuit protection

Electronic

Protection

Reverse voltage protection for ULS + Uo; Overload and short circuit protection for Uo

Load impedance (voltage output)

³ 5 k?

Load impedance (current output)

² 500 ?

Output error, reference temperature

25¡C

Output error, deviation (max.) of the upper-range value

0.2 %

Temperature coefficient

² 100 ppm/K of the largest output area

Cycle time

Approx. 1 ms

Measurement range

0 É 20 mA, 4 É 20 mA, ±20 mA, 0 É 10 V, ±10 V

Supply voltage (system and sensor)

24 VDC(-25 É +30 %); Logic and sensors (ULS)

Current consumption (system and sensor)

28 mA

System and sensor power consumption (note)

Logic component only

Supply voltage (field)

24 VDC (-25 É +30 %); Actuators (UA)

Current consumption, field supply (module with no external load)

34 mA

Isolation

500 V supply/system bus

Indicators

LED (F) red: Error status; LED (SB) green/red/orange: System bus status; LED (ULS, UA) green: Power supply status; LED (Ch1 É Ch4) yellow: Status AO 1 É AO 4; LED (Er1 É Er4) red: Error AO 1 É AO 4; Non-retentive displays

Current carrying capacity (supply connections)

8 A

Recovery time for resistive, inductive and capacitive loads

Approx. 1 ms

Monotonicity

Yes

Maximum inductive load (at current outputs)

1 mH

Maximum capacitive load (at voltage outputs)

10 nF

Output ripple

Approx. ±0.02 % of the measurement range

Maximum error over the full temperature range

² ±0.6 % of the measurement range

Maximum continuous overload (without failure)

0 ?

Overshooting

Approx. ±0.05 % of the measurement range

Crosstalk between channels at DC and AC voltage (50 Hz and 60 Hz)

90 dB

Specifications

Product Group Code

0015

Commercial Data

Packaging type

Box

Country of origin

DE

GTIN

4045454545260

Customs tariff number

85389099990