WAGO 750-489

Additional Information

Part Number

750-489

UPC

4055143948029

Tariff Code

85389099990

ETIM

Group Code : EG000024

Group Description : PLC's

Class Description : Fieldbus, decentr. periphery - analogue I/O module

Class Code : EC001596

Version : 7

Environmental Requirements

Ambient temperature (operation)

0 ¦ +55°C

Ambient temperature (storage)

-25 ¦ +85°C

Protection type

IP20

Pollution degree

2 per IEC 61131-2

Operating altitude

0 ¦ 2000 m / 0 ¦ 6562 ft

Mounting position

Horizontal (standing/lying); vertical

Relative humidity (without condensation)

95 %

Vibration resistance

4g per IEC 60068-2-6

Shock resistance

15g per IEC 60068-2-27

EMC immunity to interference

Per EN 61000-6-2, marine applications

EMC emission of interference

Per EN 61000-6-3, marine applications

Exposure to pollutants

Per IEC 60068-2-42 and IEC 60068-2-43

Connection Data

Connection technology: inputs/outputs

16 x CAGE CLAMP®

Connection type 1

Inputs/outputs

Solid conductor

0.08 ¦ 2.5 mm² / 28 ¦ 14 AWG

Fine-stranded conductor

0.08 ¦ 2.5 mm² / 28 ¦ 14 AWG

Strip length

8 ¦ 9 mm / 0.31 ¦ 0.35 inches

Physical Data

Width

24 mm / 0.945 inches

Height

100 mm / 3.937 inches

Depth

67.8 mm / 2.669 inches

Depth from upper-edge of DIN-rail

60.6 mm / 2.386 inches

Material Data

Housing material

Polycarbonate; polyamide 6.6

Fire load

2.036 MJ

Weight

99.300 g

Conformity marking

CE

Technical Data

Number of analog inputs

4

Total number of channels (module)

4

Signal type

Potentiometer positions || Thermocouple || Resistive temperature device || Resistors || MV encoder

Signal type (configurable)

Yes

Sensor connection

4 x (2-wire); RTD/R: 3-wire; 4-wire

Data width

4 x 16-bit data; 4 x 8-bit control/status (optional)

Resolution (over entire range)

0.1 K of full scale value; 0.01 K of full scale value (restricted to -50°C ¦ +150°C)

Conversion time

¥10 ms/2 wires (per channel)*; ¥20 ms/3 wires, 4 wires (per channel)*; *for RTD/R; TC/U conversion time depends on module setting

Measurement error (25°C)

In delivery state: ±0.2 % of the upper-range value (value achieved during calibration in operating environment 0 ¤ TA ¤ 55°C); After user calibration: ±0.05 % of the upper-range value (only valid in the thermally stable operating state)

Temperature coefficient

±0.001 %/K of the upper-range value

Intrinsic safety Ex i

Yes

Measurement range

Resistive temperature devices: Pt100, Pt200, Pt500, Pt1000, Ni100, Ni120, Ni200, Ni500, Ni1000, Ni1000-TK5000; Resistors: 250 ©, 500 ©, 1 k©, 2 k©, 4 k©, PTC; Potentiometer setting: 0 ¦ 100 %; Thermocouples: Type B (+250 ¦ +1,820°C); Type C (0 ¦ +2,315°C); Type E (-200 ¦ +1,000°C); Type J (-210 ¦ +1,200°C); Type K (-200 ¦ +1,372°C); Type N (-200 ¦ +1,300°C); Type R, S (-50 ¦ +1,768°C); Type T (-200 ¦ +400°C); mV sensors: ±30 mV; ±60 mV; ±120 mV; ±250 mV; ±500 mV; ±1,000 mV; ±2,000 mV; Thermistor: PTC; Resistor bridges (strain gauges): Uref: 2.4 V; Ud: ±15 mV, ±30 mV, ±60 mV

Cold junction compensation

Integrated

Configuration options

WAGO-I/O-CHECK || CODESYS Library || e!COCKPIT

Supply voltage (system)

5 VDC; via data contacts

Current consumption (5 V system supply)

60 mA

Supply voltage (field)

24 VDC; (Ex i power supply: UO = max. 27.3 V); via power jumper contacts (power supply via blade contact; transmission via spring contact)

Current consumption, field supply (module with no external load)

120 mA

Power loss Pl

1.6 W

Isolation

Per EN/IEC 60079-11: 300 VAC system/supply; per EN/UL 61010-2-201: 1200 VDC system/supply/channel

Indicators

LED (A, C, E, G) green: Function AI 1 ¦ AI 4; LED (B, D, F, H) red: Error AI 1 ¦ AI 4

Number of incoming power jumper contacts

2

Number of outgoing power jumper contacts

2

Marking

ATEX/IECEx: II 3 (1) G Ex ec [ia Ga] IIC T4 Gc; II (1) D [Ex ia Da] IIIC; I (M1) [Ex ia Ma] I

Mechanical Data

Mounting type

DIN-35 rail

Specifications

Product Group Code

0015

Commercial Data

Packaging type

Box

Country of origin

DE

GTIN

4055143948029

Customs tariff number

85389099990

Notes

Note

The analog input module must only be operated via 24 VDC Ex i!General information (e.g., installation regulations) on explosion protection is available in the WAGO I/O System 750 manuals!

Explosion Protection

Ex standard

EN IEC 60079-0, -7, -11

Safety-relevant data (circuit)

Uo = 4 V; Io = 13.46 mA; Po = 13.46 mW; linear characteristic curve

Reactances Ex ia IIC

Lo = 0.19 H; Co = 100 µF

Reactances Ex ia IIB

Lo = 0.78 H; Co = 1000 µF

Reactances Ex ia IIA

Lo = 1.57 H; Co = 1000 ¼F

Reactances Ex ia I

Lo = 2.57 H; Co = 1000 µF

Reactances (note)

Reactances, if the internal inductance Li or capacitance Ci (without cable) of the connected device is ¤1 % of the specified values.