WAGO 750-481/003-000

Additional Information

Part Number

750-481/003-000

UPC

4045454725549

ETIM

Group Code : EG000024

Group Description : PLC's

Class Description : Fieldbus, decentr. periphery - analogue I/O module

Class Code : EC001596

Version : 7

Environmental Requirements

Ambient temperature (operation)

0 ¦ +55°C

Ambient temperature (storage)

-25 ¦ +85°C

Protection type

IP20

Pollution degree

2 per IEC 61131-2

Operating altitude

0 ¦ 2000 m / 0 ¦ 6562 ft

Mounting position

Horizontal (standing/lying); vertical

Relative humidity (without condensation)

95 %

Vibration resistance

4g per IEC 60068-2-6

Shock resistance

15g per IEC 60068-2-27

EMC immunity to interference

Per EN 61000-6-2, marine applications

EMC emission of interference

Per EN 61000-6-3, marine applications

Exposure to pollutants

Per IEC 60068-2-42 and IEC 60068-2-43

Permissible H2S contaminant concentration at a relative humidity 75 %

10 ppm

Permissible SO2 contaminant concentration at a relative humidity 75 %

25 ppm

Connection Data

Connection technology: inputs/outputs

16 x CAGE CLAMP®

Connection type 1

Inputs/outputs

Solid conductor

0.08 ¦ 2.5 mm² / 28 ¦ 14 AWG

Fine-stranded conductor

0.08 ¦ 2.5 mm² / 28 ¦ 14 AWG

Strip length

8 ¦ 9 mm / 0.31 ¦ 0.35 inches

Physical Data

Width

24 mm / 0.945 inches

Height

100 mm / 3.937 inches

Depth

67.8 mm / 2.669 inches

Depth from upper-edge of DIN-rail

60.6 mm / 2.386 inches

Material Data

Housing material

Polycarbonate; polyamide 6.6

Fire load

2.299 MJ

Weight

94.133 g

Conformity marking

CE

Technical Data

Number of analog inputs

2

Total number of channels (module)

2

Signal type

Resistance measurement || Potentiometer positions

Signal type (configurable)

Yes

Sensor connection

2 x (2-wire, 3-wire)

Power consumption Pmax.

0.45 W

Data width

2 x 16-bit data; 2 x 8-bit control/status (optional)

Resolution (over entire range)

0.1°C, 0.1 ©, 0.0049 %

Conversion time (typ.)

325 ms

Conversion time

150 ¦ 500 ms (per channel)

Measurement error (reference temperature)

25°C

Measurement error, deviation (max.) from the upper-range value

0.2 %

Temperature error (max.) of the upper-range value

0.01 %/K

Measuring current (typ.)

< 0.5 mA

Intrinsic safety Ex i

Yes

Sensor types

Pt100; Configurable: Pt200, Pt500, Pt1000, Ni100, Ni120, Ni1000; Potentiometer setting 0 ¦ 100 %: 1k2, 5k0

Temperature range

ˆ’200 ¦ +850°C (Pt), ˆ’60 ¦ +250°C (Ni), ˆ’80 ¦ +320°C (Ni120)

Configuration options

WAGO-I/O-CHECK || CODESYS Library || e!COCKPIT

Supply voltage (system)

5 VDC; via data contacts

Current consumption (5 V system supply)

25 mA

Supply voltage (field)

24 VDC; (Ex i power supply: UO = max. 27.3 V); via power jumper contacts (power supply via blade contact; transmission via spring contact)

Current consumption, field supply (module with no external load)

12 mA

Power loss Pl

0.45 W

Isolation

300 VAC system/field

Indicators

LED (A, E) green: Function AI 1, AI 2; LED (B, F) red: Error AI 1, AI 2

Number of incoming power jumper contacts

2

Number of outgoing power jumper contacts

2

Current carrying capacity (power jumper contacts)

1 A

Marking

ATEX/IECEx: II 3 (1) G Ex ec [ia Ga] IIC T4 Gc; II (1) D [Ex ia Da] IIIC; I (M1) [Ex ia Ma] I

Mechanical Data

Mounting type

DIN-35 rail

Specifications

Product Group Code

0015

Commercial Data

Packaging type

Box

GTIN

4045454725549

Notes

Note

The analog input module must only be operated via 24 VDC Ex i!General information (e.g., installation regulations) on explosion protection is available in the WAGO I/O System 750 manuals!

Explosion Protection

Ex standard

EN IEC 60079-0, -7, -11

Safety-relevant data (circuit)

Uo = 7.2 V ; Io = 5.8 mA; Po = 10.5 mW; linear characteristic curve

Reactances Ex ia IIC

Lo = 0.9 H; Co = 13.5 µF

Reactances Ex ia IIB

Lo = 1 H; Co = 240 µF

Reactances Ex ia IIA

Lo = 1 H; Co = 1000 ¼F

Reactances Ex ia I

Lo = 1 H; Co = 1000 µF

Reactances (note)

Reactances without accounting for the concurrence of capacitance (Co) and inductance (Lo)