WAGO 224-112

Additional Information

Part Number

224-112

UPC

4044918583596

Tariff Code

85369010000

ETIM

Group Code : EG000047

Group Description : Installation, isolation and connection material

Class Description : Terminal for luminaire

Class Code : EC000447

Version : 7

Ratings Per Iec/En

Ratings per

EN 60664

Nominal voltage (II/2)

400 V

Rated surge voltage (II/2)

4 kV

Rated current

24 A

Legend (ratings)

(II / 2) ‰™ Overvoltage category II / Pollution degree 2

Environmental Requirements

Continuous operating temperature

105°C

Physical Data

Width

9.5 mm / 0.374 inches

Height

15.5 mm / 0.61 inches

Depth

20.5 mm / 0.807 inches

Material Data

Note (material data)

;Information on material specifications can be found here;

Color

White

Fire load

0.047 MJ

Weight

2.066 g

Connection 2

Connection type 2

Lighting side

Connection technology 2

CAGE CLAMP®

Number of connection points 2

1

Solid conductor 2

0.5 ¦ 2.5 mm² / 20 ¦ 14 AWG

Fine-stranded conductor 2

0.5 ¦ 2.5 mm² / 20 ¦ 16 AWG

Specifications

Product Group Code

0007

Commercial Data

Packaging type

Box

Country of origin

CH

GTIN

4044918583596

Customs tariff number

85369010000

Notes

Safety information

In grounded power lines

Connection 1

Connection type 1

Installation side

Connection technology

PUSH WIRE®

Actuation type

Push-in

Connectable conductor materials

Copper || Aluminum

Connectable conductor materials (note)

Terminating Aluminum ConductorsWAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm²/12 AWG if WAGO œAlu-Plus� Contact Paste ;249-130; is used for termination.œAlu-Plus� Contact Paste Advantages:Automatically destroys the oxide film during clamping.Prevents fresh oxidation at the clamping point.Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).Provides long-term protection against corrosion.Using terminal blocks with CAGE CLAMP® Spring Pressure Connection Technology, aluminum conductors must first be cleaned with a blade and then immediately be inserted into the clamping units filled with œAlu-Plus� Contact Paste.For spring clamp connections with PUSH WIRE® connection technology, WAGO recommends that the aluminum conductor first be cleaned and then immediately inserted into the clamping unit filled with œAlu-Plus� contact paste.It is also possible to apply WAGO œAlu-Plus� additionally on the whole surface of the aluminum conductor before termination.Please note that the nominal currents must be adapted to the reduced conductivity of the aluminum conductors::2.5 mm² = 16 A4 mm² = 22 A

Solid conductor

1 ¦ 2.5 mm² / 16 ¦ 14 AWG

Strip length

9 ¦ 11 mm / 0.35 ¦ 0.43 inches

Wiring direction

Side-entry wiring