TRIPP-LITE SV60KM3P0B

Additional Information

Part Number

SV60KM3P0B

UPC

037332237477

Overview

UPC Code

037332237477

UPS Type

On-Line

Output

Output Volt Amp Capacity (VA)

60000

Output kVA Capacity (kVA)

60

Output Watt Capacity (Watts)

54000

Output kW Capacity (kW)

54

Power Factor

0.9

Crest Factor

3:1

Nominal Voltage Details

Output THD full resistive load: <1.5%; Output THD non-linear load: <4%; Max DC offset: ±50mV; Max Phase angle deviation: 2°; Max Voltage unbalance deviation: 1%; Output short-circuit protection included

Frequency Compatibility

50 / 60 Hz; Supports 50 to 60 Hz and 60 to 50 Hz conversion

Frequency Compatibility Details

Auto-selectable, user adjustable

Output Receptacle Details

Output wiring: 3P, N, E

Output Circuit Breakers

300A 3 pole magnetic breaker

Output AC Waveform (AC Mode)

Pure Sine wave

Output AC Waveform (Battery Mode)

Pure Sine wave

Output Capacity Details

OVERLOAD CAPABILITY: Supports 105-110% load for 1 hour, 111-125% load for 10 minutes, 126-150% for 1 minute and Over 150% for 200ms before switching to Bypass; Online operation resumes when load is reduced to 100% or less

Nominal Output Voltage(s) Supported

120/208V 3-PH Wye; 127/220V 3-PH Wye

Output Receptacles

Hardwire

Output Voltage Regulation

ONLINE, FREQUENCY CONVERSION, BATTERY MODE: 208/120, 220/127 ±1% typical (balanced load); ±2% typical (unbalanced load); ECONOMY MODE: 208/120, 220/127 ±15V; BYPASS MODE: +15% (default, adjustable to +10%, +15% or +20%), -20% (default, adjustable to -10%, -20%, -30%)

Output Frequency Regulation

ONLINE MODE: Output frequency is ±0.05Hz of input frequency when input is within ±4Hz* of the configured 50/60Hz output setting; Output frequency is ±0.05Hz the configured 50/60Hz output setting when input is outside ±4Hz* of the configured 50/60Hz output setting; BATTERY MODE: Output frequency is ±0.1Hz of the configured 50/60Hz output setting; FREQUENCY CONVERTER MODE: Output frequency is ±0.1Hz of the configured 50/60Hz output setting; ECONOMY MODE: Output frequency equals input frequency up to ±4Hz* of the configured 50/60Hz output setting (UPS switches to Online mode if frequency goes outside of this range); BYPASS MODE: Output frequency equals input frequency up to ±4Hz* of the configured 50/60Hz output setting (switches to STANDBY mode if frequency goes outside of this range). *The TRACKING RANGE is factory set to ±4Hz and is user adjustable to ±1Hz, ±2Hz or ±4Hz; The selected TRACKING RANGE setting controls frequency output tolerances as described above in Online, Economy and Bypass modes

Output Amp Capacity

Output Amp Capacity 167A (208/120V); 157A (220/127V)

Individually Controllable Load Banks

No

Modular Upgrade Options

Includes 3 SV20PM 20kVA power modules; Up to 1 additional SV20PM 20kVA power module can be added for additional capacity or enhanced N+1 redundancy; Add 1 SV20PM for 80kVA capacity (or 60kVA with N+1)

Input

Rated input current (Maximum Load)

SV60KM3P0B 60kVA Configuration: 180A; Maximum 80kVA Configuration: 240A; 306A maximum inrush current

Nominal Input Voltage(s) Supported

120/208V 3-PH Wye; 127/220V 3-PH Wye

Nominal Input Voltage Description

Set of two hardwire input connections enables 3-Phase Wye, 4 wire (3P, N, G) inputs from two separate power sources

UPS Input Connection Type

Hardwire

Input Circuit Breakers

MAIN and ALTERNATE AC inputs are each protected by 300A 3 pole magnetic breakers

Input Phase

3-Phase

Input Frequency

40 to 70Hz (online mode); 50/60Hz Auto-selectable

Power Factor (Input)

Greater than 0.99 (full load)

THDi

Less than 2% (full linear load)

Battery

Full Load Runtime (min.)

No internal batteries and external batteries are required to operate

Half Load Runtime (min.)

No internal batteries and external batteries are required to operate

Expandable Battery Runtime

Extended runtime is available with the addition of ±120VDC external battery packs (sold separately); Recommended 3 pole, 400A, 250VDC breaker rating for external battery system

External Battery Pack Compatibility

BP240V370 ; BP240V370NB ; EBP240V2501 ; EBP240V2501NB ; EBP240V2502 ; EBP240V2502NB ; EBP240V3501 ; EBP240V3501NB ; EBP240V3502 ; EBP240V3502NB ; EBP240V5001 ; EBP240V5001NB ; EBP240V5002 ; EBP240V5002NB ; EBP240V6002 ; EBP240V6002NB ; EBP240V6003 ; EBP240V6003NB

Expandable Runtime Description

External battery pack wiring is contractor supplied.

DC System Voltage (VDC)

±120VDC

Battery Recharge Rate (Included Batteries)

User selectable charging current of 1A to 24A (2A factory setting); Recharge rate for internal batteries is 4.6 hours to 90% capacity (7A charging current)

Expandable Runtime

Yes

Voltage Regulation

Voltage Regulation Description

Online, double-conversion power conditioning

Overvoltage Correction

Maintains continuous output in online mode, without using battery power, during overvoltages to 253V (Ph-Ph), reducing output to within 1% of selected 208/120V, 220/127V nominal output voltage

Undervoltage Correction

Maintains continuous output in online mode, without using battery power, during brownout/undervoltage conditions to 156V (Ph-Ph) at full load and to 121V (Ph-Ph) at 70% output load or less, increasing output to within 1% of selected 208/120V or 220/127V nominal output voltage

User Interface, Alerts & Controls

Front Panel LCD Display

145mm front panel LCD display with directional scroll and select buttons offers complete operating status display, plus setting and selection options for all UPS functions

Switches

Front panel buttons include ESC (menu escape), UP/LEFT (menu up / left), DOWN/RIGHT (menu down / right), ENTER (confirm selection), HOME (return to home screen) and POWER (on/off power control); Also includes Manual Bypass switch

Alarm Cancel Operation

Audible alarms can be muted using on-screen prompts

Audible Alarm

Unique audible alarms for POWER ON / POWER OFF (alarm sounds for 2 seconds), BATTERY MODE (alarm sounds every 2 seconds), LOW BATTERY (alarm sounds every 0.5 seconds), UPS ALARM (alarm sounds every 1 second), UPS FAULT (continuous alarm)

LED Indicators

Front panel LED indicators represent INPUT (green), BYPASS (amber), INVERTER (green), BATTERY (red) and ALARM (red)

Surge / Noise Suppression

EMI / RFI AC Noise Suppression

Yes

AC Suppression Joule Rating

2496

AC Suppression Joule Rating Details

2496 joules (Ph-Ph), 2496 joules (Ph-N), 1872 joules (N-E)

AC Suppression Response Time

Instantaneous

Physical

Cooling Method

Fans

Installation Form Factors Supported with Included Accessories

Tower

Primary Form Factor

Tower

Primary UPS Depth (mm)

1,100

Primary UPS Height (mm)

2,010

Primary UPS Width (mm)

600

Shipping Dimensions (hwd / in.)

85.62 x 29.52 x 48.03

Shipping Weight (lbs.)

991.00

UPS Housing Material

Steel

UPS Power Module Dimensions (hwd, in.)

79.13 x 23.62 x 43.3

UPS Power Module Weight (kg)

376.94

UPS Power Module Weight (lbs.)

831

Environmental

Operating Temperature Range

0° to +40°C (+32° to +104°F); De-rates to 90% capacity at 35°C / 95°F and 80% capacity at 40°C / 104°F

Storage Temperature Range

-15° to +60°C (+5° to +140°F)

Relative Humidity

0 to 95%, non-condensing

AC Mode BTU / Hr. (Full Load)

18223

AC Economy Mode BTU / Hr. (Full Load)

715

AC Economy Mode Efficiency Rating (100% Load)

99%

Audible Noise

Less than 73 DBA front-side, 1m

Operating Elevation (m)

Up to 1000m (At elevations over 1000m, output de-rates by 1% per 100m)

Communications

Network Management Cards

WEBCARDLX ; MODBUSCARDSV ; RELAYCARDSV

Network Monitoring Port Description

Includes pre-installed Tripp Lite WEBCARDLX network interface

PowerAlert Software

For local monitoring via the UPS’s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert

Communications Cable

DB9 cabling included

SNMP Compatibility

Includes pre-installed WEBCARDLX network interface card

Communications Interface

DB9 Serial; EPO (emergency power off); Pre-installed network card; Slot for SNMP/Web interface

Line / Battery Transfer

Transfer Time

No transfer time (0 ms.) in online, double-conversion mode; Less than 20 ms. transfer time in economy mode

Low Voltage Transfer to Battery Power (Setpoint)

Maintains continuous operation without using battery power during brownout/undervoltage conditions to to 156V (Ph-Ph) Full load or 121V (Ph-Ph) 70% load or less; Below the low transfer voltage point, output is maintained utilizing reserve battery power

High Voltage Transfer to Battery Power (Setpoint)

Maintains continuous operation without using battery power during overvoltages to 253V (Ph-Ph), reducing output within 1% of nominal; Above this point, output is maintained utilizing reserve battery power

Special Features

Cold Start (Startup in Battery Mode During a Power Failure)

Cold-start operation supported

High Availability UPS Features

Automatic inverter bypass; Hot swappable batteries

Green Energy-Saving Features

Greater than 95% efficiency - GREEN UPS; High efficiency economy mode operation; Schedulable daily hours of economy mode operation

Certifications

UPS Certifications

Tested to CSA (Canada); Tested to NOM (Mexico); Tested to UL1778 (USA)

UPS Certification Details

UL1778: 2014 5th Edition; CSA C22.2 No. 107.3.14; FCC Part 15 Class A

Warranty

Product Warranty Period (U.S. & Canada)

1-year limited warranty