TRIPP-LITE SU6000RT4UHVG

Additional Information

Part Number

SU6000RT4UHVG

UPC

037332157232

Overview

UPC Code

037332157232

UPS Type

On-Line

Output

Output Volt Amp Capacity (VA)

6000

Output kVA Capacity (kVA)

6

Output Watt Capacity (Watts)

5400

Output kW Capacity (kW)

5.4

Power Factor

0,9

Crest Factor

3:1

Nominal Voltage Details

Voltage selection via front panel LCD interface

Frequency Compatibility

50 / 60 Hz

Frequency Compatibility Details

Output frequency matches input nominal on startup; Frequency conversion mode enable conversion of 60Hz to 50Hz or 50Hz to 60Hz (no de-rating)

Output Voltage Regulation (Line Mode)

+/- 2%

Output Voltage Regulation (Economy Line Mode)

+/- 10%

Output Voltage Regulation (Battery Mode)

+/- 2%

Output Receptacle Details

Output receptacle and input connections are mounted on a detachable PDU backplate with bypass switch to enable hot-swappable power module replacement

Output Circuit Breakers

Two 20A breakers protect 2 C19 outlets each

Output AC Waveform (AC Mode)

Pure Sine wave

Output AC Waveform (Battery Mode)

Pure Sine wave

Output Capacity Details

Output capacity de-rates to 4992 watts when used at 208V with optional L6-30P line cord; Supports up to 105% load continuously in double conversion mode, 106 to 125% for 1 minute, 126% to 150% for 30 seconds; Loads over 150% trigger immediate bypass mode operation to support loads directly from mains power; Double conversion mode is automatically restored as the overload is cleared

Nominal Output Voltage(s) Supported

200V; 208V; 220V; 230V; 240V

Output Receptacles

(4) C19

Individually Controllable Load Banks

No

Input

Rated input current (Maximum Load)

31.9A (200V), 30.6A (208V), 29A (220V), 27.7A (230V), 26.6A (240V)

Nominal Input Voltage(s) Supported

200V AC; 208V AC; 220V AC; 230V AC; 240V AC

Nominal Input Voltage Description

Factory configured to 208V

UPS Input Connection Type

Hardwire

UPS Input Connection Description

Supports North American 208/240V input (L1,L2,G) or International 230/220/240V (L,N,PE) input wiring; Optional SU30ACORD offers NEMA L6-30P input

Recommended Electrical Service

40A (200/208v); 30-32A (220/230/240v)

Input Phase

Single-Phase

Battery

Full Load Runtime (min.)

2 minutes (5400 watts)

Half Load Runtime (min.)

8.5 minutes (2700 watts)

Expandable Battery Runtime

Runtime is expandable with external battery packs

External Battery Pack Compatibility

BP192V12-3U ; BP192V5RT2U (limit 1); BP192V787C-1PH

DC System Voltage (VDC)

192

Battery Recharge Rate (Included Batteries)

6 hours from 10% to 90% (typical, full load discharge)

Internal UPS Replacement Battery Cartridge

RBC5-192

Battery Access

Front panel battery access door

Battery Replacement Description

Hot-swappable, user replaceable internal batteries

Expandable Runtime

Yes

Voltage Regulation

Voltage Regulation Description

Online, double-conversion power conditioning

Overvoltage Correction

Corrects overvoltages as high as 300V (<90% load) and 280V (full load)

Undervoltage Correction

Corrects undervoltages as low as 100 (<50% load) and 155V (full load); derates linearly

User Interface, Alerts & Controls

Front Panel LCD Display

Selectable LCD display with scroll and selection buttons enables UPS control and detailed monitoring options; LED/LCD panel rotates for viewing in rack/tower formats

Switches

Includes main power off/on switch, plus 2 switches to set and execute scrollable LCD functions. A manual bypass switch featured on the detachable PDU allows for complete removal of the UPS during routine maintenance without disrupting power to connected loads.

Alarm Cancel Operation

Alarm cancel switch

Audible Alarm

Unique audible alarms for all major UPS, environmental and power conditions (see manual)

LED Indicators

6 LEDs indicate line power, online mode, economy/bypass mode, on-battery, charger and AC output status; LCD screen offers additional information and control options

Surge / Noise Suppression

UPS AC Suppression Joule Rating

2595

UPS AC Suppression Response Time

Instantaneous

Physical

Cooling Method

Fans

Included Mounting Accessory Description

Includes 4 post rackmount installation accessories

Maximum Device Depth (in.)

20.7

Minimum Required Rack Depth with External Battery Pack (cm)

73

Minimum Required Rack Depth with External Battery Pack (in.)

28.67

Minimum Required Rack Depth without External Battery Pack (cm)

61

Minimum Required Rack Depth without External Battery Pack (in.)

24.17

Primary Form Factor

Rackmount

Primary UPS Depth (mm)

525

Primary UPS Height (mm)

174

Primary UPS Width (mm)

445

Rack Height

4U

Shipping Dimensions (hwd / in.)

34.00 x 24.00 x 26.00

Shipping Weight (lbs.)

190.00

UPS Housing Material

Steel

UPS Power Module Dimensions (hwd, in.)

6.85 x 17.5 x 20.67

UPS Power Module Weight (kg)

48.99

UPS Power Module Weight (lbs.)

108

Environmental

Operating Temperature Range

+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius

Storage Temperature Range

+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius

Relative Humidity

0 to 95%, non-condensing

AC Mode BTU / Hr. (Full Load)

1767

AC Economy Mode BTU / Hr. (Full Load)

768

Battery Mode BTU / Hr. (Full Load)

2279

AC Mode Efficiency Rating (100% Load)

90%

AC Economy Mode Efficiency Rating (100% Load)

96%

Operating Elevation (ft.)

0-3000m (0 to 10,000 ft.)

Audible Noise

60 dBA at front side 1 meter

Operating Elevation (m)

0-3000 m

Communications

Network Management Cards

SNMPWEBCARD ; TLNETCARD ; WEBCARDLX ; MODBUSCARD ; RELAYIOCARD

Network Monitoring Port Description

Additional contact closure support with optional RELAYIOCARD and RELAYIOMINI interface cards. RELAYIOMINI installation requires removal of panel containing USB ports

PowerAlert Software

For local monitoring via the UPS’s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert

Communications Cable

USB, DB9 serial and EPO cables included

WatchDog Compatibility

Yes

Communications Interface

USB

Line / Battery Transfer

Transfer Time

No transfer time (0 ms.) in online, double-conversion mode

Transfer Time (Economy Mode)

8 ms. typical power failure response in optional economy mode

Low Voltage Transfer to Battery Power (Setpoint)

156V (full load) / 100V (50% load or less, derates linearly)

High Voltage Transfer to Battery Power (Setpoint)

280V (full load) / 300V (90% load or less)

Special Features

Cold Start (Startup in Battery Mode During a Power Failure)

Cold-start operation supported

High Availability UPS Features

Automatic inverter bypass; Battery Independent Restart; Hot swappable UPS power module; Hot swappable batteries; Manual bypass switch

Certifications

UPS Certifications

CE; Meets FCC Part 15 Category A (EMI); ROHS (Restriction of Hazardous Substances); Tested to CSA (Canada); Tested to UL1778 (USA)

UPS Certification Details

IEC 61000-4-5 1995 B Surge Immunity

Warranty

Product Warranty Period (Worldwide)

2-year limited warranty

Connected Equipment Insurance (U.S., Canada & Puerto Rico)

$250,000 Ultimate Lifetime Insurance