TRIPP-LITE SU1500RTXLCDN

Additional Information

Part Number

SU1500RTXLCDN

UPC

037332192813

Overview

UPC Code

037332192813

UPS Type

On-Line

Output

Output Volt Amp Capacity (VA)

1500

Output kVA Capacity (kVA)

1.5

Output Watt Capacity (Watts)

1350

Output kW Capacity (kW)

1.35

Power Factor

0.9

Crest Factor

3:1

Nominal Voltage Details

120V factory-default nominal voltage; Less than 3% THD for linear loads and less than 5% for non-linear computer loads

Frequency Compatibility

50 / 60 Hz; Supports 50 to 60 Hz and 60 to 50 Hz conversion

Frequency Compatibility Details

ON LINE MODE: Output frequency is automatically configured to match nominal input frequency on startup; Output matches input frequency when +/-5Hz of nominal; Output is regulated to +/-0.05Hz when input frequency exceeds +/-5Hz of nominal. UPS switches to battery mode when input frequency is below 40Hz or above 70Hz. FREQUENCY REGULATION / CONVERSION MODE: Output is regulated to +/-0.05Hz of selected output frequency input is 40 to 70Hz; UPS switches to battery mode when input frequency is below 40Hz or above 70Hz. BATTERY MODE: Output is regulated to +/-0.05Hz.

Output Voltage Regulation (Line Mode)

+/- 2%

Output Voltage Regulation (Economy Line Mode)

+/- 10%

Output Voltage Regulation (Battery Mode)

+/- 3%

Load Management Receptacles

Two switchable three-outlet 5-15R load banks

Output AC Waveform (AC Mode)

Pure Sine wave

Output AC Waveform (Battery Mode)

Pure Sine wave

Output Capacity Details

ON LINE MODE: Maximum output capacity ratings is reduced to 1215 watts at 115V nominal and 1080 watts at 100V nominal; FREQUENCY REGULATION / CONVERSION MODE: Maximum output ratings are reduced in frequency regulation / conversion mode (127/120V 945 watts / 115V 850 watts / 110V 804 watts / 100V 756 watts) OVERLOAD CAPACITY: Supports inverter operation up to 105% load continuously, 125% load for 3 minutes; 150% load for 30 seconds and >150% load for 0.5 seconds before switching to BYPASS (when bypass input voltage and frequency are WITHIN bypass limits) or SHUTDOWN (when bypass input voltage or frequency are OUTSIDE bypass limits)

Nominal Output Voltage(s) Supported

100V; 110V; 115V; 120V; 127V

Output Receptacles

(6) 5-15R

Individually Controllable Load Banks

No

Input

Rated input current (Maximum Load)

12A

Nominal Input Voltage(s) Supported

100V AC; 110V AC; 115V AC; 120V AC; 127V AC

Nominal Input Voltage Description

120V factory default

UPS Input Connection Type

5-15P

Input Circuit Breakers

20A

UPS Input Cord Length (ft.)

10

Recommended Electrical Service

15A 120V

Input Phase

Single-Phase

Battery

Full Load Runtime (min.)

4.2 min. (1350w)

Half Load Runtime (min.)

14 min. (675w)

Expandable Battery Runtime

Extended runtime supported via optional external battery packs

External Battery Pack Compatibility

BP48V24-2U (limit 1); BP48V60RT-3U (multi-pack compatible); BP48V27-2US (multi-pack compatible)

Expandable Runtime Description

Some external battery configurations require the use of Tripp Lite's External Battery Configuration Software, see manual for details

DC System Voltage (VDC)

48

Battery Recharge Rate (Included Batteries)

Less than 3 hours recharge to 90%; Add 6 hours per BP48V27-2US (typical, full load discharge)

Internal UPS Replacement Battery Cartridge

RBC94-2U

Battery Access

Front panel battery access

Battery Replacement Description

Hot-swappable, user replaceable batteries

Expandable Runtime

Yes

Voltage Regulation

Voltage Regulation Description

Online, double-conversion power conditioning maintains 2% output voltage regulation during brownouts and overvoltages

Overvoltage Correction

Corrects overvoltages to 150V (0-100% load)

Undervoltage Correction

Corrects undervoltages to 100V at full load (90V at 100V nominal)

Severe Undervoltage Correction

Corrects brownouts to 70V (70% load) & 55V (33% load)

User Interface, Alerts & Controls

Front Panel LCD Display

Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, frequency, operating mode, alarm function and a variety of additional options

Switches

2 switches control off/on power status and alarm-cancel operation; 2 additional scroll-down and scroll-up / select options enable LCD status viewing and configuration options

Alarm Cancel Operation

Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available

Audible Alarm

Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions

LED Indicators

7 front panel LEDs indicate line power availability, AC to DC conversion, battery mode operation, inverter mode, eco mode operation, bypass mode operation and AC output status

Surge / Noise Suppression

UPS AC Suppression Joule Rating

570

UPS AC Suppression Response Time

Instantaneous

UPS Dataline Suppression

1 line TEL/DSL (1 in / 1 out); 10/100Base T Ethernet

EMI / RFI AC Noise Suppression

Yes

Physical

Cooling Method

Fan

Included Mounting Accessory Description

Included 4POSTRAILKIT mounting bracket enables installation in 4 post racks from 20.5 to 36 inches (521 to 914mm)

Installation Form Factors Supported with Included Accessories

4 post 19 inch rackmount

Installation Form Factors Supported with Optional Accessories

2 post rackmount ( 2POSTRMKITWM ); 2-4 post front rail rackmount ( UPSHDEARKIT ); 4 post rackmount short-depth ( 4POSTRAILKITWM ); Tower ( 2-9USTAND ); Wallmount ( 2POSTRMKITWM )

Minimum Required Rack Depth with External Battery Pack (cm)

65

Minimum Required Rack Depth with External Battery Pack (in.)

25.5

Minimum Required Rack Depth without External Battery Pack (cm)

55

Minimum Required Rack Depth without External Battery Pack (in.)

21.5

Optional Mounting Accessory Notes

Optional 2-9USTAND enables upright tower UPS placement; 2POSTRMKITWM enables wall-mount and 2-post rackmount installation; 4POSTRAILKITWM enables installation in 4-post short-depth racks from 14.5 to 23.5 inches (368 to 597mm); UPSHDEARKIT enables installation in 2 or 4-post racks using front vertical rails only, without rear support

Primary Form Factor

Rackmount

Primary UPS Depth (mm)

470

Primary UPS Height (mm)

89

Primary UPS Width (mm)

445

Rack Height

2U

Shipping Dimensions (hwd / in.)

9.20 x 23.30 x 19.20

Shipping Weight (lbs.)

60.00

UPS Housing Material

Steel

UPS Power Module Dimensions (hwd, in.)

3.5 x 17.5 x 18.5

UPS Power Module Weight (kg)

20.50

UPS Power Module Weight (lbs.)

45.2

Environmental

Operating Temperature Range

+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius

Storage Temperature Range

+5 to +122 degrees Fahrenheit / -20 to +40 degrees Celsius with batteries; -13 to +131 Fahrenheit / -25 to +55 degrees Celsius without batteries

Relative Humidity

0 to 95%, non-condensing

AC Mode BTU / Hr. (Full Load)

455

AC Economy Mode BTU / Hr. (Full Load)

294

Battery Mode BTU / Hr. (Full Load)

559

AC Economy Mode Efficiency Rating (100% Load)

94%

Audible Noise

45 dBA at 1m front side

Operating Elevation (m)

Up to 3000m

Communications

Network Monitoring Port Description

Pre-installed WEBCARDLX Network Management Card interface included

PowerAlert Software

For local monitoring via the UPS’s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert

Communications Cable

USB and DB9 cabling included

WatchDog Compatibility

Supports Watchdog application, OS and hard-reboot restart options for remote applications

Communications Interface

Contact closure; DB9 Serial; EPO (emergency power off); Pre-installed network card; Slot for SNMP/Web interface; USB (HID enabled)

Line / Battery Transfer

Transfer Time

Zero (0 milliseconds) in double-conversion mode; 4 milliseconds economy mode

Low Voltage Transfer to Battery Power (Setpoint)

100V at full load (90V full load at 100V nominal setting); 70V at 70% load; 55V at 33% load

High Voltage Transfer to Battery Power (Setpoint)

150

Special Features

Cold Start (Startup in Battery Mode During a Power Failure)

Cold-start operation supported

High Availability UPS Features

Automatic inverter bypass; Battery Independent Restart; Hot swappable batteries

Green Energy-Saving Features

High efficiency economy mode operation; Individually controllable load banks; Schedulable daily hours of economy mode operation

Certifications

UPS Certifications

Meets FCC Part 15 Category A (EMI); ROHS (Restriction of Hazardous Substances); Tested to CSA (Canada); Tested to UL1778 (USA)

Warranty

Product Warranty Period (Worldwide)

2-year limited warranty

Connected Equipment Insurance (U.S., Canada & Puerto Rico)

$250,000 Ultimate Lifetime Insurance