TRIPP-LITE SU12000RT4U

Additional Information

Part Number

SU12000RT4U

UPC

037332154897

Overview

UPC Code

037332154897

UPS Type

On-Line

Output

Output Volt Amp Capacity (VA)

12000

Output kVA Capacity (kVA)

12

Output Watt Capacity (Watts)

8400

Output kW Capacity (kW)

8.4

Power Factor

0.7

Crest Factor

3:1

Nominal Voltage Details

240/120V or 208/120V split phase output

Frequency Compatibility

60 Hz

Output Voltage Regulation (Line Mode)

+/- 3%

Output Voltage Regulation (Economy Line Mode)

+/- 10%

Output Voltage Regulation (Battery Mode)

+/- 3%

Output Receptacle Details

Supports North American 208/120V or 240/120V split-phase hardwire output (L1, L2, N, G)

Output Circuit Breakers

20A branch rated double pole breakers (x3) protect 2 C19 and 1 5-15/20R outlets each, 30A branch rated double pole breakers (x2) protect 1 L6-30R outlet each, 20A single pole breakers (x2) protect one 5-15/20R outlet each

Output AC Waveform (AC Mode)

Pure Sine wave

Output AC Waveform (Battery Mode)

Pure Sine wave

Output Capacity Details

12,000VA, 8400W (240V) / 10,395VA, 8400W (208V); Supports up to 105% load continuously in double conversion mode, 106 to 125% for 3 minutes, 126 to 150% for 30 seconds; Loads over 150% trigger immediate bypass mode operation to support equipment directly from mains power; Double conversion mode is automatically restored as the overload is cleared

Nominal Output Voltage(s) Supported

120V; 208V; 240V

Output Receptacles

(5) 5-15/20R; (2) L6-30R; (6) C19; Hardwire

Individually Controllable Load Banks

No

Input

Rated input current (Maximum Load)

50A

Nominal Input Voltage(s) Supported

120/208V (Split phase L1,L2,N,G); 120/240V (Split phase L1,L2,N,G)

UPS Input Connection Type

Hardwire

UPS Input Connection Description

4 wire split-phase input (L1, L2, N, G)

Recommended Electrical Service

50A 208/240-120 Split Phase (L1, L2, N, G); 6 AWG wiring recommended

Input Phase

Single-Phase

Battery

Full Load Runtime (min.)

7 min. (8400w)

Half Load Runtime (min.)

20 min. (4200w)

Expandable Battery Runtime

Supports extended runtime with optional external battery packs

External Battery Pack Compatibility

BP192V18-4U

DC System Voltage (VDC)

192

Battery Recharge Rate (Included Batteries)

Less than 6 hours from 10% to 80% (typical, full load discharge)

Battery Replacement Description

Hot-swappable, user replaceable batteries

Expandable Runtime

Yes

Voltage Regulation

Voltage Regulation Description

+/-3% output voltage regulation in online, double-conversion mode

Overvoltage Correction

Corrects overvoltages to 140 (measured L1-N : L2-N)

Undervoltage Correction

Corrects undervoltages to 65V (measured L1-N : L2-N)

User Interface, Alerts & Controls

Front Panel LCD Display

Selectable LCD display with scroll and selection buttons enables UPS control and detailed monitoring options; LED/LCD panel rotates for viewing in rack/tower formats

Switches

2 Switches control off/on power status and alarm-cancel/self-test operation; 2 additional switches support set and execute scrolling LCD functions; bundled PDU includes bypass switch to enable hot-swap UPS power module replacement

Alarm Cancel Operation

Alarm cancel switch

Audible Alarm

Unique audible alarms for all major UPS, environmental and power conditions (see manual)

LED Indicators

6 LEDs indicate line power, online mode, economy/bypass mode, on-battery, charger and AC output status; LCD screen offers additional information and control options

Surge / Noise Suppression

UPS AC Suppression Joule Rating

3620

UPS AC Suppression Response Time

Instantaneous

EMI / RFI AC Noise Suppression

Yes

Physical

Cooling Method

Fan

Included Battery Pack Dimensions (hwd / in.)

7 x 17.5 x 27.8

Included Battery Pack Weight (lbs.)

239

Included Mounting Accessory Description

2 sets of adjustable 4 post rack rails included

Installation Form Factors Supported with Included Accessories

4 post 19 inch rackmount

Installation Form Factors Supported with Optional Accessories

2 post rackmount (2POSTRMKITHD); Tower (2-9USTAND)

Maximum Device Depth (in.)

34

Minimum Required Rack Depth (inches)

40

Optional Mounting Accessory Notes

2 sets of 2POSTRMKITHD required for 2 post rackmount installation

Primary Form Factor

Rackmount

Primary UPS Depth (mm)

706

Primary UPS Height (mm)

178

Primary UPS Width (mm)

445

Rack Height

8U

Shipping Dimensions (hwd / in.)

37.00 x 24.00 x 33.50

Shipping Weight (lbs.)

448.80

UPS Dimensions Details

Includes 4U battery pack, 4U UPS/power module and detachable bypass PDU; MAXIMUM DEVICE DEPTH specification refers to the whole UPS installed depth with bypass PDU installed

UPS Housing Material

Steel

UPS Power Module Dimensions (hwd, in.)

7 x 17.5 x 27.8

UPS Power Module Weight (kg)

39.01

UPS Power Module Weight (lbs.)

86

Environmental

Operating Temperature Range

+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius.

Storage Temperature Range

+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius.

Relative Humidity

0 to 95%, non-condensing

AC Mode BTU / Hr. (Full Load)

4286

AC Economy Mode BTU / Hr. (Full Load)

1829

Battery Mode BTU / Hr. (Full Load)

3187

AC Mode Efficiency Rating (100% Load)

87%

AC Economy Mode Efficiency Rating (100% Load)

94%

Operating Elevation (ft.)

0-3000m (0 to 10,000 ft.)

Audible Noise

60 dBA at front side 1 meter

Operating Elevation (m)

0-3000 m

Communications

Network Management Cards

SNMPWEBCARD; WEBCARDLX; MODBUSCARD; RELAYIOCARD

Network Monitoring Port Description

RS232 and contact closure communications are supported on one DB9 port

PowerAlert Software

For local monitoring via the UPS’s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert

Communications Cable

USB and DB9 cabling included

Communications Interface

USB (HID enabled); DB9 Serial; Contact closure; EPO (emergency power off); Slot for SNMP/Web interface

Line / Battery Transfer

Transfer Time

No transfer time (0 ms.) in online, double-conversion mode

Transfer Time (Economy Mode)

2 milliseconds typical in optional economy mode

Low Voltage Transfer to Battery Power (Setpoint)

65V (L1-N:L2-N)

High Voltage Transfer to Battery Power (Setpoint)

140V (L1-N:L2-N)

Special Features

Cold Start (Startup in Battery Mode During a Power Failure)

Cold-start operation supported

High Availability UPS Features

Automatic inverter bypass; Hot swappable batteries; Hot swappable UPS power module; Manual bypass switch

Green Energy-Saving Features

High efficiency economy mode operation; Schedulable daily hours of economy mode operation

Certifications

UPS Certifications

Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI)

Warranty

Product Warranty Period (Worldwide)

2-year limited warranty

Connected Equipment Insurance (U.S., Canada & Puerto Rico)

$250,000 Ultimate Lifetime Insurance