TRIPP-LITE SMX750SLT

Additional Information

Part Number

SMX750SLT

UPC

037332124388

Overview

UPC Code

037332124388

UPS Type

Line-Interactive

Output

Output Volt Amp Capacity (VA)

750

Output Watt Capacity (Watts)

500

Power Factor

0.7

Nominal Voltage Details

230V default (voltage selection via back panel switches)

Frequency Compatibility

50 / 60 Hz

Frequency Compatibility Details

Automatic frequency selection

Output Voltage Regulation (Line Mode)

-11%, +6%

Output Voltage Regulation (Battery Mode)

+/- 5%

Included Output Power Cables

Includes 2 C13 to C14 output power cables

Output AC Waveform (AC Mode)

Sine wave

Output AC Waveform (Battery Mode)

Pure Sine wave

Nominal Output Voltage(s) Supported

220V; 230V; 240V

Output Receptacles

(6) C13

Individually Controllable Load Banks

No

Input

Rated input current (Maximum Load)

3.6A (220V), 3.5A (230V), 3.4A (240V)

Nominal Input Voltage(s) Supported

220V AC; 230V AC; 240V AC

UPS Input Connection Type

C14 inlet

UPS Input Connection Description

IEC320-C14 input connection accepts a variety of detachable cordsets to match country or site-specific wall receptacles

Input Phase

Single-Phase

Battery

Full Load Runtime (min.)

5 min. (500w)

Half Load Runtime (min.)

15 min. (250w)

DC System Voltage (VDC)

24

Battery Recharge Rate (Included Batteries)

Less than 4 hours to 90% (typical, full load discharge)

Internal UPS Replacement Battery Cartridge

RBC24-SLT

Battery Access

Battery access door

Battery Replacement Description

Hot-swappable, user replaceable batteries

Expandable Runtime

No

Voltage Regulation

Voltage Regulation Description

Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 151 to 290V

Overvoltage Correction

Voltage reduction of 12% applies when input is 232-266 (220V), 244-278 (230V), 254-290 (240V)

Undervoltage Correction

Voltage boost of 15% applies when input is 175-198 (220V), 182-206 (230V), 190-216 (240V)

Severe Undervoltage Correction

Voltage boost of 30% applies when input is 151-174 (220V), 158-181 (230V), 166-190 (240V)

User Interface, Alerts & Controls

Switches

2 Switches control off/on power status and alarm-cancel/self-test operation; rear panel protected switches support nominal voltage selection

Alarm Cancel Operation

Power-fail alarm can be silenced using alarm-cancel switch

Audible Alarm

Audible alarm indicates power failure and overload conditions

LED Indicators

9 LEDs indicate line power, battery power, AVR, overload and replace battery status - with a 3-LED level meter for load and battery charge level

Surge / Noise Suppression

UPS AC Suppression Joule Rating

504

UPS AC Suppression Response Time

Instantaneous

UPS Dataline Suppression

1 line TEL/DSL (1 in / 1 out); 10/100Base T Ethernet

EMI / RFI AC Noise Suppression

Yes

Physical

Cooling Method

Fan

Primary Form Factor

Tower

Primary UPS Depth (mm)

337

Primary UPS Height (mm)

260

Primary UPS Width (mm)

171

Shipping Dimensions (hwd / in.)

14.00 x 9.75 x 18.50

Shipping Weight (lbs.)

38.60

UPS Housing Material

Steel

UPS Power Module Dimensions (hwd, in.)

10.25 x 6.75 x 13.25

UPS Power Module Weight (kg)

15.47

UPS Power Module Weight (lbs.)

34.1

Environmental

Operating Temperature Range

+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius

Storage Temperature Range

+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius

Relative Humidity

0 to 95%, non-condensing

AC Mode BTU / Hr. (Full Load)

73

AC Mode Efficiency Rating (100% Load)

96%

Operating Elevation (ft.)

Up to 10,000 ft

Audible Noise

Audible Noise < 50 dBA at Front Side 1 Meter

Operating Elevation (m)

Up to 3,000m

Communications

Network Management Cards

SNMPWEBCARD; WEBCARDLX; RELAYIOCARD

Network Monitoring Port Description

Supports detailed monitoring of UPS and site power conditions

PowerAlert Software

For local monitoring via the UPS’s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert

Communications Cable

USB and DB9 cabling included

WatchDog Compatibility

Supports Watchdog application, OS and hard-reboot restart options for remote applications

Communications Interface

USB (HID enabled); DB9 Serial; Slot for SNMP/Web interface

Line / Battery Transfer

Transfer Time

4-8 milliseconds

Low Voltage Transfer to Battery Power (Setpoint)

151 (220V), 158 (230V), 166 (240V)

High Voltage Transfer to Battery Power (Setpoint)

266V (220V), 278V (230V) or 290V (240V)

Special Features

Cold Start (Startup in Battery Mode During a Power Failure)

Cold-start operation supported

High Availability UPS Features

Hot swappable batteries

Green Energy-Saving Features

Greater than 95% efficiency - GREEN UPS

Certifications

UPS Certifications

CE; Tested to GOST (Russia); Tested to SASO (Saudi Arabia)

UPS Certification Details

EN62040-1, EN62040-2

Warranty

Product Warranty Period (International)

2-year limited warranty