TRIPP-LITE SMX700HGL

Additional Information

Part Number

SMX700HGL

UPC

037332224804

Overview

UPC Code

037332224804

UPS Type

Line-Interactive

Output

Output Volt Amp Capacity (VA)

700

Output Watt Capacity (Watts)

450

Nominal Voltage Details

230v nominal inverter output voltage

Frequency Compatibility

50 / 60 Hz

Frequency Compatibility Details

Automatic frequency selection

Output Voltage Regulation (Line Mode)

-18%, +8%

Output AC Waveform (Battery Mode)

PWM sine wave

Nominal Output Voltage(s) Supported

220V; 230V; 240V

Output Receptacles

(6) C13

Individually Controllable Load Banks

No

Input

Rated input current (Maximum Load)

3.6A

Nominal Input Voltage(s) Supported

230V AC

UPS Input Connection Type

C14 inlet

UPS Input Cord Length (ft.)

0.50

Recommended Electrical Service

10A 230V

Voltage Compatibility (VAC)

230

Input Phase

Single-Phase

Battery

Full Load Runtime (min.)

14.5 min. (450w)

Half Load Runtime (min.)

36 min. (225w)

DC System Voltage (VDC)

36

Battery Recharge Rate (Included Batteries)

Less than 3.6 hours from 10% to 90% (typical, full load discharge)

Internal UPS Replacement Battery Cartridge

RBC53L

Battery Access

Battery access door allows hot swap battery replacement without powering connected equipment off

Typical Battery Lifespan

3-6 years, depending on usage

Expandable Runtime

No

Voltage Regulation

Voltage Regulation Description

Line interactive UPS offers 2 boost levels of brownout correction and a single level of overvoltage adjustment to maintain usable, computer grade output without consuming battery power over an input voltage range of 155 to 274V AC

Overvoltage Correction

Input voltages between 206 and 245V AC are reduced by 9%

Undervoltage Correction

Input voltages between 183 and 199 are boosted by 10%

Severe Undervoltage Correction

Input voltages between 155 and 182 are boosted by 21%

User Interface, Alerts & Controls

Switches

Yes, includes 2 front panel mounted push-button switches for system enable, self-test and alarm cancel functions

Audible Alarm

3 function audible alarm indicates power failure conditions (4 short beeps every 10 seconds), overload (continuous short beeps) and low battery (continuous tone). Audible Alarm is factory muted for silent operation; Audible alarm can be restored to indicate power failure, overload conditions and Low Battery events, using our Free PowerAlert UPS management software.

LED Indicators

5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status

Surge / Noise Suppression

UPS AC Suppression Joule Rating

340

EMI / RFI AC Noise Suppression

Yes

AC Suppression Response Time

Instantaneous

Physical

Cooling Method

Cooling via rear-exit cooling fan

Installation Form Factors Supported with Optional Accessories

Wallmount (UPSWM - tower mounting kit)

Primary Form Factor

Tower

Primary UPS Depth (mm)

229

Primary UPS Height (mm)

325

Primary UPS Width (mm)

191

Shipping Dimensions (hwd / in.)

18.50 x 12.20 x 13.38

UPS Housing Material

PVC

UPS Power Module Dimensions (hwd, in.)

12.8 x 7.5 x 9

UPS Power Module Weight (kg)

19.10

UPS Power Module Weight (lbs.)

42.1

Environmental

Operating Temperature Range

+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius

Storage Temperature Range

+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius

Relative Humidity

0 to 95%, non-condensing

AC Mode BTU / Hr. (Full Load)

208.6

Battery Mode BTU / Hr. (Full Load)

189.1

Communications

Communications Interface

USB; DB9 Serial

Line / Battery Transfer

Transfer Time

5 milliseconds

Low Voltage Transfer to Battery Power (Setpoint)

155

High Voltage Transfer to Battery Power (Setpoint)

274

Special Features

Grounding Lug

Equipotential connection (back panel grounding lug)

Cold Start (Startup in Battery Mode During a Power Failure)

Cold-start operation supported

Certifications

UPS Certifications

CE; Tested to UL60601-1 (medical grade)

Warranty

Product Warranty Period (International)

5-year limited warranty