Additional Information
- Part Number
- SMX1500LCD
- UPC
- 037332126078
Overview
- UPC Code
- 037332126078
- UPS Type
- Line-Interactive
Output
- Output Volt Amp Capacity (VA)
- 1500
- Output kVA Capacity (kVA)
- 1.5
- Output Watt Capacity (Watts)
- 900
- Nominal Voltage Details
- 230V nominal output in battery mode
- Frequency Compatibility
- 50 / 60 Hz
- Frequency Compatibility Details
- Automatic frequency selection
- Output Voltage Regulation (Line Mode)
- -18%, +8%
- Output Voltage Regulation (Battery Mode)
- +/- 5%
- Included Output Power Cables
- Includes 2 C13 to C14 output power cables.
- Hot-Swap PDU options
- PDUBHV10 (2U / 8 C13 outlets)
- Output AC Waveform (AC Mode)
- Sine wave
- Output AC Waveform (Battery Mode)
- PWM sine wave
- Nominal Output Voltage(s) Supported
- 220V; 230V; 240V
- Output Receptacles
- (8) C13
- Individually Controllable Load Banks
- No
Input
- Rated input current (Maximum Load)
- 4.4A
- Nominal Input Voltage(s) Supported
- 230V AC
- UPS Input Connection Type
- C14 inlet
- UPS Input Connection Description
- Chassis mounted C14 inlet accepts user-supplied AC power cord with country specific cordsets
- Input Circuit Breakers
- 5A
- Input Phase
- Single-Phase
Battery
- Full Load Runtime (min.)
- 4.5 min. (900w)
- Half Load Runtime (min.)
- 12 min. (450w)
- DC System Voltage (VDC)
- 24
- Battery Recharge Rate (Included Batteries)
- 4.5 hours from 10% to 90%
- Internal UPS Replacement Battery Cartridge
- IMPORTANT BATTERY REPLACEMENT INFORMATION > If your SMX1500LCD UPS has no battery replacement door, please contact a local electronics repair technician to source and install a matching replacement battery; If your SMX1500LCD UPS is equipped with a battery access door, please order Tripp Lite RBC1500 (quantity 1) replacement battery
- Battery Access
- Includes battery access door
- Battery Replacement Description
- Hot-swappable, user-replaceable internal battery cartridge
- Expandable Runtime
- No
Voltage Regulation
- Voltage Regulation Description
- Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 144 to 282
- Overvoltage Correction
- Input voltages between 245 and 282 are reduced by 12%
- Undervoltage Correction
- Input voltages between 177 and 199 are boosted by 14%
- Severe Undervoltage Correction
- Input voltages between 144 and 176 are boosted by 30%
User Interface, Alerts & Controls
- Front Panel LCD Display
- Backlighted LCD screen offers detailed UPS status information, configuration options and Error message reporting; STATUS INFORMATION includes Input Voltage, Output Voltage, Estimated Runtime (minutes), Output Load Percentage, Output Load Wattage, Battery Charge Percentage, Graphical 5-Bar Battery Charge Level and UPS Operating Mode Display; CONFIGURATION OPTIONS include Power Sensitivity, LCD Status Information Scrolling, Alarm Disable, LCD Brightness and Self Test / REPORTED ERROR MESSAGES include Replace-Battery and Overload conditions; LCD Screen rotates for vertical or horizontal UPS placement
- Switches
- ON/OFF/MODE button provides UPS on/off power control (long-press) and advances the LCD screen display (short tap); MUTE/ENTER button provides temporary alarm cancel, plus selection and confirmation of on-screen configuration options
- Alarm Cancel Operation
- Press the MUTE/ENTER button during a power failure to silence the alarm; Once silenced, alarm will re-sound to indicate low-battery status
- Audible Alarm
- Audible alarm indicates power-failure and low-battery status; Alarm can be disabled entirely via front panel LCD interface (see manual)
- LED Indicators
- Front panel LCD display
Surge / Noise Suppression
- UPS AC Suppression Joule Rating
- 360
- UPS AC Suppression Response Time
- Instantaneous
- UPS Dataline Suppression
- 1 line TEL/DSL (1 in / 1 out); 10/100Base T Ethernet
- UPS Dataline Suppression Details
- RJ11 telephone cable included
- EMI / RFI AC Noise Suppression
- Yes
Physical
- Cooling Method
- Convection
- Included Mounting Accessory Description
- Included mounting brackets enable installation in 2 and 4 post racks, plus upright tower configurations; Set of 4 rubber-feet enable no-slip horizontal desktop placement
- Installation Form Factors Supported with Included Accessories
- 2 post 19 inch rackmount; 4 post 19 inch rackmount; Tower
- Minimum Required Rack Depth (inches)
- 13.5
- Primary Form Factor
- Rackmount
- Primary UPS Depth (mm)
- 267
- Primary UPS Height (mm)
- 89
- Primary UPS Width (mm)
- 438
- Rack Height
- 2U
- Shipping Dimensions (hwd / in.)
- 7.80 x 15.28 x 21.77
- Shipping Weight (lbs.)
- 34.55
- UPS Housing Material
- ABS
- UPS Power Module Dimensions (hwd, in.)
- 3.5 x 17.25 x 10.5
- UPS Power Module Weight (kg)
- 13.34
- UPS Power Module Weight (lbs.)
- 29.4
Environmental
- Operating Temperature Range
- +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
- Storage Temperature Range
- +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
- Relative Humidity
- 0 to 95%, non-condensing
- AC Mode BTU / Hr. (Full Load)
- 133
- Battery Mode BTU / Hr. (Full Load)
- 542
- AC Mode Efficiency Rating (100% Load)
- 96%
Communications
- Network Monitoring Port Description
- Supports detailed monitoring of UPS and site power conditions
- PowerAlert Software
- For local monitoring via the UPS™s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert
- Communications Cable
- USB cabling included
- WatchDog Compatibility
- Supports Watchdog application, OS and hard-reboot restart options for remote applications
- Communications Interface
- USB (HID enabled); DB9 Serial
Line / Battery Transfer
- Transfer Time
- 3 milliseconds (AC to battery mode) / 2 milliseconds (battery to AC mode)
- Low Voltage Transfer to Battery Power (Setpoint)
- 144
- High Voltage Transfer to Battery Power (Setpoint)
- 282
Special Features
- Cold Start (Startup in Battery Mode During a Power Failure)
- Cold-start operation supported
- Green Energy-Saving Features
- Greater than 95% efficiency - GREEN UPS
Certifications
- UPS Certifications
- CE; Tested to GOST (Russia); Tested to SASO (Saudi Arabia)
- UPS Certification Details
- CE Class A (EMI); CE IEC 62040-1-1, 62040-1-2
Warranty
- Product Warranty Period (International)
- 2-year limited warranty