TRIPP-LITE SMART5000TEL3U

Additional Information

Part Number

SMART5000TEL3U

UPC

037332116116

Overview

UPC Code

037332116116

UPS Type

Line-Interactive

Output

Output Volt Amp Capacity (VA)

5000

Output kVA Capacity (kVA)

5

Output Watt Capacity (Watts)

3750

Output kW Capacity (kW)

3.75

Power Factor

0.75

Nominal Voltage Details

120V output is limited to 450 watts

Frequency Compatibility

60 Hz

Output Voltage Regulation (Line Mode)

208 & 120V (-6%, +20%)

Output Voltage Regulation (Battery Mode)

+/- 5%

Output Circuit Breakers

20A double pole breaker supports L6-20R outlets, 5A breaker supports 5-15R outlets, L6-30R outlet is unbreakered

Output AC Waveform (AC Mode)

Sine wave

Output AC Waveform (Battery Mode)

Pure Sine wave

Output Capacity Details

120V 5-15R outlets are limited to 450 watts (max.)

Nominal Output Voltage(s) Supported

208V

Output Receptacles

(2) 5-15R; (2) L6-20R; (1) L6-30R

Individually Controllable Load Banks

No

Input

Rated input current (Maximum Load)

24A

Nominal Input Voltage(s) Supported

208V AC

UPS Input Connection Type

L6-30P

UPS Input Cord Length (ft.)

10

Recommended Electrical Service

30A 208V

Input Phase

Single-Phase

Battery

Full Load Runtime (min.)

8.5 min. (3750w)

Half Load Runtime (min.)

20 min. (1875w)

DC System Voltage (VDC)

48

Battery Recharge Rate (Included Batteries)

Less than 4 hours from 10% to 90% (typical, full load discharge)

Internal UPS Replacement Battery Cartridge

RBC94-3U (quantity 3)

Battery Access

Front panel battery access door

Battery Replacement Description

Hot-swappable, user replaceable batteries

Expandable Runtime

No

Voltage Regulation

Voltage Regulation Description

Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 167 to 260

Overvoltage Correction

Input voltages between 228V and 260V are reduced by 12%

Undervoltage Correction

Input voltages between 167V and 194V are boosted by 12%

User Interface, Alerts & Controls

Switches

2 Switches control off/on power status and alarm-cancel/self-test operation

Alarm Cancel Operation

Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status

Audible Alarm

Audible alarm indicates power-failure, overload and low-battery conditions

LED Indicators

5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status

Surge / Noise Suppression

UPS AC Suppression Joule Rating

1020

UPS AC Suppression Response Time

Instantaneous

EMI / RFI AC Noise Suppression

Yes

Physical

Cooling Method

Fan

Installation Form Factors Supported with Included Accessories

4 post 19 inch rackmount

Installation Form Factors Supported with Optional Accessories

2 post rackmount ( 2POSTRMKITHD ); Tower ( 2-9USTAND )

Minimum Required Rack Depth (inches)

30

Primary Form Factor

Rackmount

Primary UPS Depth (mm)

635

Primary UPS Height (mm)

133

Primary UPS Width (mm)

445

Rack Height

3U

Shipping Dimensions (hwd / in.)

12.00 x 23.00 x 33.00

Shipping Weight (lbs.)

182.00

UPS Housing Material

Steel

UPS Power Module Dimensions (hwd, in.)

5.25 x 17.5 x 25

UPS Power Module Weight (kg)

65.00

UPS Power Module Weight (lbs.)

143.3

Environmental

Operating Temperature Range

+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius

Storage Temperature Range

+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius

Relative Humidity

0 to 95%, non-condensing

AC Mode BTU / Hr. (Full Load)

366

Battery Mode BTU / Hr. (Full Load)

1423

AC Mode Efficiency Rating (100% Load)

97%

Audible Noise

45 dBA maximum, front side 1m

Communications

Network Management Cards

SNMPWEBCARD ; TLNETCARD ; WEBCARDLX

Network Monitoring Port Description

Supports detailed monitoring of UPS and site power conditions

PowerAlert Software

For local monitoring via the UPS’s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert

Communications Cable

USB and DB9 cabling included

WatchDog Compatibility

Supports Watchdog application, OS and hard-reboot restart options for remote applications

Communications Interface

Contact closure; DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface; USB

Line / Battery Transfer

Transfer Time

7 milliseconds (AC to Battery), 1 millisecond (Battery to AC)

Low Voltage Transfer to Battery Power (Setpoint)

167

High Voltage Transfer to Battery Power (Setpoint)

260

Special Features

Grounding Lug

Back panel grounding lug

Cold Start (Startup in Battery Mode During a Power Failure)

Cold-start operation supported

High Availability UPS Features

Hot swappable batteries

Green Energy-Saving Features

Greater than 95% efficiency - GREEN UPS

Certifications

UPS Certifications

Meets FCC Part 15 Category A (EMI); Tested to CSA (Canada); Tested to UL1778 (USA)

Warranty

Product Warranty Period (Worldwide)

2-year warranty, 3 year with registration. Note: Registration is required for 3-year warranty.

Connected Equipment Insurance (U.S., Canada & Puerto Rico)

$250,000 Ultimate Lifetime Insurance