TRIPP-LITE SMART1500LCDXL

Additional Information

Part Number

SMART1500LCDXL

UPC

037332159885

Overview

UPC Code

037332159885

UPS Type

Line-Interactive

Output

Output Volt Amp Capacity (VA)

1500

Output kVA Capacity (kVA)

1.50

Output Watt Capacity (Watts)

900

Output kW Capacity (kW)

0.90

Nominal Voltage Details

115v nominal output in battery mode

Frequency Compatibility

60 Hz

Output Voltage Regulation (Line Mode)

-18%, +8%

Output Voltage Regulation (Battery Mode)

+/- 5%

Output AC Waveform (AC Mode)

Sine wave

Output AC Waveform (Battery Mode)

PWM sine wave

Nominal Output Voltage(s) Supported

110V; 115V; 120V

Output Receptacles

(8) 5-15R

Individually Controllable Load Banks

No

Input

Rated input current (Maximum Load)

8.6A

Nominal Input Voltage(s) Supported

110V AC; 115V AC; 120V AC

UPS Input Connection Type

5-15P; Right-Angled

Input Circuit Breakers

10A

UPS Input Cord Length (ft.)

6

Recommended Electrical Service

15A 120V

Input Phase

Single-Phase

Battery

Full Load Runtime (min.)

4 min. (900w)

Half Load Runtime (min.)

12 min. (450w)

Expandable Battery Runtime

Extended runtime supported via optional external battery pack (limit 1)

External Battery Pack Compatibility

BP24V15RT2U (limit 1)

DC System Voltage (VDC)

24

Battery Recharge Rate (Included Batteries)

Less than 4.5 hours from 10% to 90%

Internal UPS Replacement Battery Cartridge

See RBC Selector for replacement battery information

Battery Access

Battery access door enables hot-swappable, user replaceable internal battery

Expandable Runtime

Yes

Voltage Regulation

Voltage Regulation Description

Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 75 to 147

Overvoltage Correction

Input voltages between 128 and 147 are reduced by 12%

Undervoltage Correction

Input voltages between 93 and 107 are boosted by 14%

Severe Undervoltage Correction

Input voltages between 75 and 92 are boosted by 30%

User Interface, Alerts & Controls

Front Panel LCD Display

LCD interface reports Input Voltage, Output Voltage, Battery Charge Percentage, Estimated Runtime in Minutes, Load Percentage, Load Watts; Additional LCD icons report battery charge level (5 "bars"), Line Power Mode, Battery Mode, Replace Battery and Auto-Voltage Regulation / AVR status; LCD interface control options include Alarm Disable, Display Scrolling, Initiate Self-test, LCD brightness, External Battery setting and line sensitivity

Switches

2 Switches control off/on power status and alarm-cancel/self-test operation

Alarm Cancel Operation

Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status

Audible Alarm

Audible alarm indicates power-failure and low-battery conditions; Alarm can be permanently silenced via LCD interface

Surge / Noise Suppression

UPS AC Suppression Joule Rating

1038

UPS AC Suppression Response Time

Instantaneous

UPS Dataline Suppression

1 line TEL/DSL (1 in / 1 out); 10/100Base T Ethernet

EMI / RFI AC Noise Suppression

Yes

Physical

Cooling Method

Fan

Included Mounting Accessory Description

Included mounting brackets enable installation in 2 and 4 post racks, plus upright tower configurations; Set of 4 rubber-feet enable no-slip horizontal desktop placement installation

Installation Form Factors Supported with Included Accessories

2 post 19 inch rackmount; 4 post 19 inch rackmount; Tower

Minimum Required Rack Depth with External Battery Pack (cm)

34

Minimum Required Rack Depth with External Battery Pack (in.)

13.5

Minimum Required Rack Depth without External Battery Pack (cm)

34

Minimum Required Rack Depth without External Battery Pack (in.)

13.5

Primary Form Factor

Rackmount

Primary UPS Depth (mm)

267

Primary UPS Height (mm)

89

Primary UPS Width (mm)

439

Rack Height

2U

Shipping Dimensions (hwd / in.)

7.40 x 15.00 x 21.20

Shipping Weight (lbs.)

33.20

UPS Housing Material

Polycarbonate

UPS Power Module Dimensions (hwd, in.)

3.5 x 17.3 x 10.5

UPS Power Module Weight (kg)

13.34

UPS Power Module Weight (lbs.)

29.4

Environmental

Operating Temperature Range

+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius

Storage Temperature Range

+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius

Relative Humidity

Up to 95%, non-condensing

AC Mode BTU / Hr. (Full Load)

78

Battery Mode BTU / Hr. (Full Load)

721

AC Mode Efficiency Rating (100% Load)

97%

Communications

Network Monitoring Port Description

Supports detailed monitoring of UPS and site power conditions; DB9 port also supports contact-closure messaging for power-fail (pins 1 & 9) and power-restored (pins 1, 8)

PowerAlert Software

For local monitoring via the UPS’s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert

Communications Cable

USB and DB9 Serial cabling included

WatchDog Compatibility

Supports Watchdog application, OS and hard-reboot restart options for remote applications

Communications Interface

USB (HID enabled); DB9 Serial; Contact closure

Line / Battery Transfer

Transfer Time

4 milliseconds AC to battery mode / 3 milliseconds battery to AC mode

Low Voltage Transfer to Battery Power (Setpoint)

75

High Voltage Transfer to Battery Power (Setpoint)

147

Special Features

Cold Start (Startup in Battery Mode During a Power Failure)

Cold-start operation supported

Green Energy-Saving Features

Greater than 95% efficiency - GREEN UPS

Certifications

UPS Certifications

Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category B (EMI)

Warranty

Product Warranty Period (U.S. & Canada)

3-year limited warranty

Connected Equipment Insurance (U.S., Canada & Puerto Rico)

$250,000 Ultimate Lifetime Insurance