TRIPP-LITE SM2200RMDVTAA

Additional Information

Part Number

SM2200RMDVTAA

UPC

037332156310

Overview

UPC Code

037332156310

UPS Type

Line-Interactive

Output

Output Volt Amp Capacity (VA)

2200

Output kVA Capacity (kVA)

2.2

Output Watt Capacity (Watts)

1920

Output kW Capacity (kW)

1.92

Power Factor

0.87

Frequency Compatibility

50 / 60 Hz

Frequency Compatibility Details

Automatic frequency selection

Output Voltage Regulation (Battery Mode)

+/- 5%

Load Management Receptacles

Two switchable single-outlet 5-15R load banks

Output AC Waveform (AC Mode)

Sine wave

Output AC Waveform (Battery Mode)

Pure Sine wave

Nominal Output Voltage(s) Supported

120V

Output Receptacles

(4) 5-15R; (4) 5-15/20R

Individually Controllable Load Banks

Yes

Input

Rated input current (Maximum Load)

16A (120V), 10A (230V)

Nominal Input Voltage(s) Supported

120V AC; 230V AC

UPS Input Connection Type

5-20P; C20 inlet

UPS Input Connection Description

C20 inlet and 5 compatible plugsets (5-20P, Schuko CEE7, EU1-16P, British BS1363, Italian CEI 23-16)

Input Circuit Breakers

20A

UPS Input Cord Length (ft.)

6

Input Phase

Single-Phase

Battery

Full Load Runtime (min.)

12 minutes (1920 watts)

Half Load Runtime (min.)

30 minutes (960 watts)

Expandable Battery Runtime

Extended runtime supported via optional external battery packs

External Battery Pack Compatibility

BP48V24-2U (limit 1); BP48V60RT-3U (multi-pack compatible); BP48V27-2US (multi-pack compatible)

DC System Voltage (VDC)

48

Battery Recharge Rate (Included Batteries)

Less than 4.5 hours from 10% to 90% (internal batteries)

Internal UPS Replacement Battery Cartridge

RBC49-DV (quantity 2 required)

Battery Access

Front panel battery access door

Battery Replacement Description

Hot-swappable, user replaceable batteries

Expandable Runtime

Yes

Voltage Regulation

Voltage Regulation Description

Automatic voltage regulation (AVR) maintains 120v line power output with input range of 89 to 148 or 170 to 286

Overvoltage Correction

Voltage reduction of 12% applies when input is between 127 and 148 (120V)

Undervoltage Correction

Voltage boost of 12% applies when input voltage is between 96 and 108 (120V)

User Interface, Alerts & Controls

Switches

2 Switches control off/on power status and alarm-cancel/self-test operation; rear panel protected switches support nominal voltage selection

Alarm Cancel Operation

Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status

Audible Alarm

Audible alarm indicates power-failure, overload and low-battery conditions

LED Indicators

5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status

Surge / Noise Suppression

UPS AC Suppression Joule Rating

340

UPS AC Suppression Response Time

Instantaneous

EMI / RFI AC Noise Suppression

Yes

Physical

Cooling Method

Fan

Included Mounting Accessory Description

Complete installation accessories available for 2 post, 4 post and tower installation

Installation Form Factors Supported with Included Accessories

Tower

Installation Form Factors Supported with Optional Accessories

4 post rackmount full-depth ( 4POSTRAILKIT )

Minimum Required Rack Depth with External Battery Pack (cm)

82

Minimum Required Rack Depth with External Battery Pack (in.)

32.25

Minimum Required Rack Depth without External Battery Pack (cm)

77

Minimum Required Rack Depth without External Battery Pack (in.)

30.25

Primary Form Factor

Rackmount

Primary UPS Depth (mm)

641

Primary UPS Height (mm)

133

Primary UPS Width (mm)

445

Rack Height

3U

Shipping Dimensions (hwd / in.)

12.00 x 30.00 x 30.00

Shipping Weight (lbs.)

160.00

UPS Housing Material

Steel

UPS Power Module Dimensions (hwd, in.)

5.25 x 17.5 x 25.25

UPS Power Module Weight (kg)

47.29

UPS Power Module Weight (lbs.)

104.25

Environmental

Operating Temperature Range

+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius.

Storage Temperature Range

+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius.

Relative Humidity

0 to 95%, non-condensing

AC Mode BTU / Hr. (Full Load)

347

Battery Mode BTU / Hr. (Full Load)

894

AC Mode Efficiency Rating (100% Load)

95%

Audible Noise

45 dBA maximum, front side 1m

Communications

Network Management Cards

SNMPWEBCARD ; WEBCARDLX

Network Monitoring Port Description

Supports detailed monitoring of UPS and site power conditions

PowerAlert Software

For local monitoring via the UPS’s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert

Communications Cable

USB and DB9 cabling included

WatchDog Compatibility

Supports Watchdog application, OS and hard-reboot restart options for remote applications

Network UPS Tools Compatibility

NUT compatible. See the full list of Tripp Lite NUT compatible UPS systems at http://www.networkupstools.org/stable-hcl.html?manufacturer=Tripp Lite

Communications Interface

USB (HID enabled); DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface

Line / Battery Transfer

Transfer Time

2-4 milliseconds

Low Voltage Transfer to Battery Power (Setpoint)

89 (120V), 170 (230V)

High Voltage Transfer to Battery Power (Setpoint)

148 (120V), 286 (230V)

Special Features

Cold Start (Startup in Battery Mode During a Power Failure)

Cold-start operation supported

High Availability UPS Features

Hot swappable batteries

Green Energy-Saving Features

Greater than 95% efficiency - GREEN UPS; Individually controllable load banks

Certifications

UPS Certifications

Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI); ROHS (Restriction of Hazardous Substances); TAA Compliant

Warranty

Product Warranty Period (Worldwide)

2-year limited warranty