TRIPP-LITE RV750ULHW

Additional Information

Part Number

RV750ULHW

UPC

037332121639

Overview

UPC Code

037332121639

Output

Frequency Compatibility

60 Hz

Pure Sine Wave Output

No

Output (Watts)

750

Nominal Output Voltage(s) Supported

120V

Output Receptacles

Hardwire

Continuous Output Capacity (Watts)

750

Peak Output Capacity (Watts)

1500

Output Voltage Regulation

LINE POWER (AC): Maintains 120V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains PWM sine wave output voltage of 120 V AC (+/-5%).

Output Frequency Regulation

60 Hz (+/- 0.3 Hz)

Overload Protection

Includes 10A input breaker dedicated to the charging system

Input

Nominal Input Voltage(s) Supported

120V AC

Recommended Electrical Service

DC INPUT: Requires 12V DC input source capable of delivering 73A for the required duration (when used at full continuous capacity - DC requirements increase during Over-Power and Double-Boost operation).

Maximum Input Amps / Watts

DC INPUT: Full continuous load - 72A at 12V DC. AC INPUT: 29 amps at 120V AC with full inverter and charger load (9.3A max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0% based on AC output.

Input Connection Type

DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: hardwire

Input Cord Length Details

DC INPUT: User supplies cabling. 6 gauge or larger (see manual). AC INPUT: hardwire

Voltage Compatibility (VAC)

120

Voltage Compatibility (VDC)

12

Battery

Expandable Battery Runtime

Runtime is expandable with any number of user supplied wet, gel or SLA batteries

DC System Voltage (VDC)

12

Battery Pack Accessory (Optional)

98-121 sealed lead acid battery (optional)

Battery Charge

11A /45A (selectable)

LVC (Low Voltage Cut-Off)

10V DC +/-3%

Expandable Runtime

Yes

User Interface, Alerts & Controls

Front Panel LEDs

Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences.

Switches

3-position on/off/remote switch enables simple on/off power control plus auto/remote setting that enables distant on/off control of the inverter system when used in conjunction with APSRM4 accessory (sold separately) in inverter mode. In AC uninterruptibl

Surge / Noise Suppression

AC Suppression Joule Rating

450

Physical

Cooling Method

Multi-speed fan

Form Factors Supported

Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information)

Material of Construction

Polycarbonate

Shipping Dimensions (hwd / in.)

12.40 x 10.50 x 10.70

Shipping Weight (lbs.)

18.60

Unit Dimensions (hwd / in.)

7 x 8.75 x 9

Unit Weight (lbs.)

16

Environmental

Relative Humidity

0-95% non-condensing

Line / Battery Transfer

Transfer Time (Line Power to Battery Mode)

16.6 milliseconds (typical - compatible with many computers - verify transfer time compatibility of loads for UPS applications)

Low Voltage Transfer to Battery Power

In AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 75V (user adjustable to 85, 95, 105V - see manual)

High Voltage Transfer to Battery Power

In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 145V

Special Features

Load Sensing

Optional load sense function enables automatic inverter shutoff and startup as connected equipment is powered off and on. Front panel load sense potentiometer can be set to shutoff or turn on inverter power in response to loads of any level, up to 150 watts.

Certifications

Certifications

Tested to UL458 (USA) and CSA (Canada)

Warranty

Product Warranty Period (U.S. & Canada)

30-month limited warranty