- Commercial Status
- Commercialised
- Range of product
- Twido
- Product or component type
- Compact base controller
- Discrete I/O number
- 10
- Discrete input number
- 6
- Discrete input voltage
- 24 V
- Discrete input voltage type
- DC
- Discrete output number
- 4 for relay
- [Us] rated supply voltage
- 100...240 V AC
- Use of slot
- Memory cartridge or realtime clock cartridge
- Data backed up
- Internal RAM (lithium) 30 days, charging time = 10 h, battery life = 10 yr
- Integrated connection type
- Non isolated serial link mini DIN, Modbus/character mode master/slave RTU/ASCII (RS485) half duplex, 38,4 kbit/s
- Integrated connection type
- Power supply
- Discrete input logic
- Sink or source
- Input voltage limits
- 20.4...28.8 V
- Discrete input current
- 7 mA for I0.2 to I0.5
- Discrete input current
- 11 mA for I0.0 to I0.1
- Input impedance
- 3400 Ohm for I0.2 to I0.5
- Input impedance
- 2100 Ohm for I0.0 to I0.1
- Filter time
- 45 µs + programmed filter time for I0.0 to I0.5 at state 0
- Filter time
- 35 µs + programmed filter time for I0.0 to I0.5 at state 1
- Insulation between channel and internal logic
- 1500 Vrms for 1 minute
- Insulation resistance between channel
- None
- Minimum load
- 0.1 mA
- Load current
- 2 A at 30 V DC resistive load, operating rate = 30 cyc/mn for relay outputs
- Load current
- 2 A at 30 V DC inductive load, operating rate = 30 cyc/mn for relay outputs
- Load current
- 2 A at 240 V AC resistive load, operating rate = 30 cyc/mn for relay outputs
- Load current
- 2 A at 240 V AC inductive load, operating rate = 30 cyc/mn for relay outputs
- Mechanical durability
- >= 20000000 cycles for relay outputs
- Electrical durability
- >= 100000 cycles for relay outputs
- Current consumption
- 5 mA at 5 V DC at state 0
- Current consumption
- 26 mA at 24 V DC at state 1
- Current consumption
- 24 mA at 5 V DC at state 1
- I/O connection
- Non-removable screw terminal block
- Network frequency
- 50/60 Hz
- Supply voltage limits
- 85...264 V
- Network frequency limits
- 47...63 Hz
- Power supply output current
- 0.25 A for 24 V DC sensors
- Power supply input current
- 250 mA
- Protection type
- Power protection with internal fuse
- Power consumption in VA
- 30 VA at 264 V
- Power consumption in VA
- 20 VA at 100 V
- Insulation resistance
- > 10 MOhm at 500 V, between supply and earth terminals
- Insulation resistance
- > 10 MOhm at 500 V, between I/O and earth terminals
- Program memory
- 700 instructions
- Exact time for 1 K instruction
- 1 ms
- System overhead
- 0.5 ms
- Memory description
- Internal RAM, 64 timers, no floating, no trigonometrical
- Memory description
- Internal RAM, 3000 internal words, no floating, no trigonometrical
- Memory description
- Internal RAM, 128 internal bits, no floating, no trigonometrical
- Memory description
- Internal RAM, 128 counters, no floating, no trigonometrical
- Free slots
- 1
- Realtime clock
- Without
- Counting input number
- 3 channel(s) at 5000 Hz 16 bits
- Counting input number
- 1 channel(s) at 20000 Hz 32 bits
- Analogue adjustment points
- 1 point adjustable from 0...1023
- Status LED
- 1 LED red for module error (ERR)
- Status LED
- 1 LED per channel green for I/O status
- Status LED
- 1 LED green for RUN
- Status LED
- 1 LED green for PWR
- Status LED
- 1 LED for user pilot light (STAT)
- Terminals description PLC n°1
- (-)PW_OUT_NEG
- Terminals description PLC n°1
- (+)PW_OUT_POS
- Terminals description PLC n°1
- (0)IN_DIS#0
- Terminals description PLC n°1
- (1)IN_DIS#1
- Terminals description PLC n°1
- (2)IN_DIS#2
- Terminals description PLC n°1
- (3)IN_DIS#3
- Terminals description PLC n°1
- (4)IN_DIS#4
- Terminals description PLC n°1
- (5)IN_DIS#5
- Terminals description PLC n°1
- ALT
- Terminals description PLC n°1
- COM_NEG#0-5
- Terminals description PLC n°1
- TB_TOP
- Terminals description PLC n°2
- (-)PW_OUT_NEG
- Terminals description PLC n°2
- (+)PW_OUT_POS
- Terminals description PLC n°2
- (0)IN_DIS#0
- Terminals description PLC n°2
- (1)IN_DIS#1
- Terminals description PLC n°2
- (2)IN_DIS#2
- Terminals description PLC n°2
- (3)IN_DIS#3
- Terminals description PLC n°2
- (4)IN_DIS#4
- Terminals description PLC n°2
- (5)IN_DIS#5
- Terminals description PLC n°2
- ALT_1
- Terminals description PLC n°2
- COM_POS#0-5
- Terminals description PLC n°2
- TB_TOP
- Terminals description PLC n°3
- (0)OUT_DIS#0
- Terminals description PLC n°3
- (1)OUT_DIS#1
- Terminals description PLC n°3
- (2)OUT_DIS#2
- Terminals description PLC n°3
- (3)OUT_DIS#3
- Terminals description PLC n°3
- (COM0)COM#0-2
- Terminals description PLC n°3
- (COM1)COM#3
- Terminals description PLC n°3
- (GND)GROUND
- Terminals description PLC n°3
- (L)PW
- Terminals description PLC n°3
- (N)PW
- Terminals description PLC n°3
- TB_BOTTOM
- Product weight
- 0.51 lb(US) (0.23 kg)
- Immunity to microbreaks
- 10 ms
- Dielectric strength
- 1500 V for 1 minute, between supply and earth terminals
- Dielectric strength
- 1500 V for 1 minute, between I/O and earth terminals
- Product certifications
- CSA
- Product certifications
- UL
- Marking
- CE
- Ambient air temperature for operation
- 32...131 °F (0...55 °C)
- Ambient air temperature for storage
- -13...158 °F (-25...70 °C)
- Relative humidity
- 30...95 % without condensation
- IP degree of protection
- IP20
- Operating altitude
- 0...6561.68 ft (0...2000 m)
- Storage altitude
- 0...9842.52 ft (0...3000 m)
- Vibration resistance
- 4 gn, 25...100 Hz mounting on: plate or panel with fixing kit
- Vibration resistance
- 1.6 mm, 2...25 Hz mounting on: plate or panel with fixing kit
- Vibration resistance
- 1 gn, 57...150 Hz mounting on: 35 mm symmetrical DIN rail
- Vibration resistance
- 0.075 mm, 10...57 Hz mounting on: 35 mm symmetrical DIN rail
- Shock resistance
- 15 gn for 11 ms