SQUARE-D ATV71HD45N4-Dropship Automation
SQUARE-D ATV71HD45N4-Dropship Automation

SQUARE-D ATV71HD45N4

Brand : Dropship Automation
SKU: DA-513711
Availability: 1 In Stock
Product Type: simple
Additional Information Part Number ATV71HD45N4 UPC 785901966500 Main Commercial Status Commercialised Range of product Altivar 71 Product or component type Variable speed drive Product specific application Complex, high-power machines Component name ATV71 Motor power kW 45 kWat 380...480 V 3 phases Motor power hp 60 hpat 380...480 V 3 phases [Us] rated supply voltage 380...480 V (- 15...10 %) Phase...
Call For Price
Description

Additional Information

Part Number
ATV71HD45N4
UPC
785901966500

Main

Commercial Status
Commercialised
Range of product
Altivar 71
Product or component type
Variable speed drive
Product specific application
Complex, high-power machines
Component name
ATV71
Motor power kW
45 kWat 380...480 V 3 phases
Motor power hp
60 hpat 380...480 V 3 phases
[Us] rated supply voltage
380...480 V (- 15...10 %)
Phase
3 phases
Line current
85 Afor 480 V 3 phases 45 kW / 60 hp
Line current
104 Afor 380 V 3 phases 45 kW / 60 hp
EMC filter
Integrated
Assembly style
With heat sink
Apparent power
68.5 kVAat 380 V 3 phases 45 kW / 60 hp
Nominal output current
94 Aat 2.5 kHz 380 V 3 phases / 60 hp
Nominal output current
77 Aat 2.5 kHz 460 V 3 phases / 60 hp
Maximum transient current
155 Afor 2 s 3 phases 45 kW / 60 hp
Maximum transient current
141 Afor 60 s 3 phases 45 kW / 60 hp
Speed drive output frequency
0.1...500 Hz
Nominal switching frequency
2.5 kHz
Switching frequency
2.5...16 kHz with derating factor
Switching frequency
1...16 kHz adjustable
Asynchronous motor control profile
ENA (Energy adaptation) system for unbalanced loads
Asynchronous motor control profile
Flux vector control (FVC) with sensor (current vector)
Asynchronous motor control profile
Sensorless flux vector control (SFVC) (voltage or current vector)
Asynchronous motor control profile
Voltage/frequency ratio (2 or 5 points)
Type of polarization
No impedance Modbus

Complementary

Product destination
Asynchronous motors
Product destination
Synchronous motors
Supply voltage limits
323...528 V
Supply frequency
50...60 Hz (- 5...5 %)
Network frequency limits
47.5...63 Hz
Speed range
1...50for synchronous motor in open-loop mode, without speed feedback
Speed range
1...1000 asynchronous motor in closed-loop mode with encoder feedback
Speed range
1...100 asynchronous motor in open-loop mode, without speed feedback
Speed accuracy
+/- 10 % of nominal slip 0.2 Tn to Tn torque variation without speed feedback
Speed accuracy
+/- 0.01 % of nominal speed 0.2 Tn to Tn torque variation in closed-loop mode with encoder feedback
Torque accuracy
+/- 5 % in closed-loop mode with encoder feedback
Torque accuracy
+/- 15 % in open-loop mode, without speed feedback
Transient overtorque
220 % of nominal motor torque +/- 10 %for 2 s
Transient overtorque
170 % of nominal motor torque +/- 10 %for 60 s every 10 minutes
Braking torque
30 % without braking resistor
Synchronous motor control profile
Vector control without speed feedback
Regulation loop
Adjustable PI regulator
Motor slip compensation
Adjustable
Motor slip compensation
Automatic whatever the load
Motor slip compensation
Not available in voltage/frequency ratio (2 or 5 points)
Motor slip compensation
Suppressable
Local signalling
1 LED red presence of drive voltage
Insulation
Electrical between power and control
Type of cable
Without mounting kit: 1-strand IEC cableat 113°F (45°C), copper 90°C XLPE/EPR
Type of cable
Without mounting kit: 1-strand IEC cableat 113°F (45°C), copper 70°C PVC
Type of cable
With an IP21 or an IP31 kit: 3-strand IEC cableat 104°F (40°C), copper 70°C PVC
Type of cable
With a NEMA Type1 kit: 3-strand UL 508 cableat 104°F (40°C), copper 75°C PVC
Electrical connection
L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB terminal 150 mm²
Electrical connection
AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR terminal 2.5 mm² / AWG 14
Tightening torque
L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB 362.83 lbf.in (41 N.m)
Tightening torque
AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR 5.31 lbf.in (0.6 N.m)
Supply
Internal supply, 24 V DC, voltage limits 21...27 V, Internal supply for reference potentiometer (1 to 10 kOhm), 10.5 V DC +/- 5 %,
Analogue input number
2
Analogue input type
AI2 software-configurable voltage 0...10 V DC, input voltage 24 V max, impedance 30000 Ohm, resolution 11 bits
Analogue input type
AI2 software-configurable current 0...20 mA, impedance 242 Ohm, resolution 11 bits
Analogue input type
AI1-/Al1+ bipolar differential voltage +/- 10 V DC, input voltage 24 V max, resolution 11 bits + sign
Sampling duration
LI6 (if configured as logic input) 2 ms, +/- 0.5 ms discrete input(s)
Sampling duration
LI1...LI5 2 ms, +/- 0.5 ms discrete input(s)
Sampling duration
Al2 2 ms, +/- 0.5 ms analog input(s)
Sampling duration
AI1-/Al1+ 2 ms, +/- 0.5 ms analog input(s)
Response time
R2A, R2B 7 ms, tolerance +/- 0.5 ms discrete output(s)
Response time
R1A, R1B, R1C 7 ms, tolerance +/- 0.5 ms discrete output(s)
Response time
AO1 2 ms, tolerance +/- 0.5 ms analog output(s)
Accuracy
AO1 +/- 1 % for a temperature variation 60°C
Accuracy
AI2 +/- 0.6 % for a temperature variation 60°C
Accuracy
AI1-/Al1+ +/- 0.6 % for a temperature variation 60°C
Linearity error
AO1 +/- 0.2 %
Linearity error
AI1-/Al1+, AI2 +/- 0.15 % of maximum value
Analogue output number
1
Analogue output type
AO1 software-configurable voltage 0...10 V DC, impedance 470 Ohm, resolution 10 bits
Analogue output type
AO1 software-configurable current 0...20 mA, impedance 500 Ohm, resolution 10 bits
Analogue output type
AO1 software-configurable logic output 10 V
Discrete output number
2
Discrete output type
R2A, R2B configurable relay logic NO, electrical durability 100000 cycles
Discrete output type
R1A, R1B, R1C configurable relay logic NO/NC, electrical durability 100000 cycles
Minimum switching current
Configurable relay logic 3 mAat 24 V DC
Maximum switching current
R1, R2 on resistive load, 5 Aat 30 V DC, cos phi = 1,
Maximum switching current
R1, R2 on resistive load, 5 Aat 250 V AC, cos phi = 1,
Maximum switching current
R1, R2 on inductive load, 2 Aat 30 V DC, cos phi = 0.4,
Maximum switching current
R1, R2 on inductive load, 2 Aat 250 V AC, cos phi = 0.4,
Discrete input number
7
Discrete input type
PWR: safety input 24 V DC, impedance: 1500 Ohm conforming to ISO 13849-1 level d
Discrete input type
LI6: switch-configurable PTC probe 0...6, impedance: 1500 Ohm
Discrete input type
LI6: switch-configurable 24 V DC with level 1 PLC, impedance: 3500 Ohm
Discrete input type
LI1...LI5: programmable 24 V DC with level 1 PLC, impedance: 3500 Ohm
Discrete input logic
LI6 (if configured as logic input) positive logic (source), 11 V (state 0)
Discrete input logic
LI6 (if configured as logic input) negative logic (sink), > 16 V (state 0), LI1...LI5 positive logic (source), 11 V (state 0)
Discrete input logic
LI1...LI5 negative logic (sink), > 16 V (state 0),
Acceleration and deceleration ramps
Automatic adaptation of ramp if braking capacity exceeded, by using resistor
Acceleration and deceleration ramps
Linear adjustable separately from 0.01 to 9000 s
Acceleration and deceleration ramps
S, U or customized
Braking to standstill
By DC injection
Protection type
Motor thermal protection
Protection type
Motor power removal
Protection type
Motor motor phase break
Protection type
Drive thermal protection
Protection type
Drive short-circuit between motor phases
Protection type
Drive overvoltages on the DC bus
Protection type
Drive overheating protection
Protection type
Drive overcurrent between output phases and earth
Protection type
Drive line supply undervoltage
Protection type
Drive line supply overvoltage
Protection type
Drive input phase breaks
Protection type
Drive break on the control circuit
Protection type
Drive against input phase loss
Protection type
Drive against exceeding limit speed
Insulation resistance
> 1 mOhm at 500 V DC for 1 minute to earth
Frequency resolution
Display unit 0.1 Hz
Frequency resolution
Analog input 0.024/50 Hz
Communication port protocol
CANopen
Communication port protocol
Modbus
Type of connector
Male SUB-D 9 on RJ45 CANopen
Type of connector
1 RJ45 Modbus on terminal
Type of connector
1 RJ45 Modbus on front face
Physical interface
2-wire RS 485 Modbus
Transmission frame
RTU Modbus
Transmission rate
20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps CANopen
Transmission rate
9600 bps, 19200 bps Modbus on front face
Transmission rate
4800 bps, 9600 bps, 19200 bps, 38.4 Kbps Modbus on terminal
Data format
8 bits, odd even or no configurable parity Modbus on terminal
Data format
8 bits, 1 stop, even parity Modbus on front face
Number of addresses
1...247 Modbus
Number of addresses
1...127 for CANopen
Method of access
Slave CANopen
Marking
CE
Operating position
Vertical +/- 10 degree
Height
24.8 in (630 mm)
Depth
11.42 in (290 mm)
Width
12.6 in (320 mm)
Product weight
97 lb(US) (44 kg)
Functionality
Full
Specific application
Other applications
Option card
Profibus DP V1 communication card
Option card
Profibus DP communication card
Option card
Overhead crane card
Option card
Modbus/Uni-Telway communication card
Option card
Modbus TCP communication card
Option card
Modbus Plus communication card
Option card
Interface card for encoder
Option card
Interbus-S communication card
Option card
I/O extension card
Option card
Fipio communication card
Option card
Ethernet/IP communication card
Option card
DeviceNet communication card
Option card
Controller inside programmable card
Option card
CC-Link communication card

Environment

Noise level
63.7 dB conforming to 86/188/EEC
Dielectric strength
5092 V DC between control and power terminals
Dielectric strength
3535 V DC between earth and power terminals
Electromagnetic compatibility
Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
Electromagnetic compatibility
Radiated radio-frequency electromagnetic field immunity test conforming to IEC 61000-4-3 level 3
Electromagnetic compatibility
Electrostatic discharge immunity test conforming to IEC 61000-4-2 level 3
Electromagnetic compatibility
Electrical fast transient/burst immunity test conforming to IEC 61000-4-4 level 4
Electromagnetic compatibility
Conducted radio-frequency immunity test conforming to IEC 61000-4-6 level 3
Electromagnetic compatibility
1.2/50 µs - 8/20 µs surge immunity test conforming to IEC 61000-4-5 level 3
Standards
EN 55011 class A group 2
Standards
EN 61800-3 environments 1 category C3
Standards
EN 61800-3 environments 2 category C3
Standards
EN/IEC 61800-3
Shipping & Return

Returns Policy

You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.

Shipping

We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.

Recently Viewed Products