Subscribe To Our Newsletter
Get the latest updates on new products and upcoming sales
SQUARE-D ATV32HU22N4
Additional Information Part Number ATV32HU22N4 UPC 785901687634 Main Commercial Status Commercialised Range of product Altivar 32 Product or component type Variable speed drive Product destination Asynchronous motors Product destination Synchronous motors Product specific application Complex machines Assembly style With heat sink Component name ATV32 EMC filter Class C2 EMC filter integrated Phase 3 phases [Us] rated supply voltage 380...500 V...
Couldn't load pickup availability
Additional Information
- Part Number
- ATV32HU22N4
- UPC
- 785901687634
Main
- Commercial Status
- Commercialised
- Range of product
- Altivar 32
- Product or component type
- Variable speed drive
- Product destination
- Asynchronous motors
- Product destination
- Synchronous motors
- Product specific application
- Complex machines
- Assembly style
- With heat sink
- Component name
- ATV32
- EMC filter
- Class C2 EMC filter integrated
- Phase
- 3 phases
- [Us] rated supply voltage
- 380...500 V - 15...10 %
- Supply voltage limits
- 323...550 V
- Supply frequency
- 50...60 Hz - 5...5 %
- Network frequency limits
- 47.5...63 Hz
- Motor power kW
- 2.2 kW 380...500 V
- Motor power hp
- 3 hp 380...500 V
Complementary
- Line current
- 8.7 A 380 V 3 phases 2.2 kW 3 hp
- Line current
- 6.6 A 500 V 3 phases 2.2 kW 3 hp
- Apparent power
- 5.7 kVA 500 V 3 phases 2.2 kW 3 hp
- Nominal output current
- 5.5 A 4 kHz 500 V 2.2 kW 3 hp
- Maximum transient current
- 8.3 A 60 s 2.2 kW 3 hp
- Speed drive output frequency
- 0.5...599 Hz
- Nominal switching frequency
- 4 kHz
- Switching frequency
- 2...16 kHz adjustable
- Speed range
- 1...100 asynchronous motor in open-loop mode
- Speed accuracy
- +/- 10 % of nominal slip 0.2 Tn to Tn
- Torque accuracy
- +/- 15 %
- Transient overtorque
- 170...200 %
- Asynchronous motor control profile
- Voltage/frequency ratio, 2 points
- Asynchronous motor control profile
- Voltage/frequency ratio, 5 points
- Asynchronous motor control profile
- Flux vector control without sensor - Energy Saving, NoLoad law
- Asynchronous motor control profile
- Flux vector control without sensor, standard
- Asynchronous motor control profile
- Voltage/frequency ratio - Energy Saving, quadratic U/f
- Synchronous motor control profile
- Vector control without sensor
- Regulation loop
- Adjustable PID regulator
- Motor slip compensation
- Automatic whatever the load
- Motor slip compensation
- Not available in voltage/frequency ratio (2 or 5 points)
- Motor slip compensation
- Adjustable 0...300 %
- Local signalling
- 1 LED red drive fault
- Local signalling
- 1 LED red CANopen error
- Local signalling
- 1 LED green CANopen run
- Local signalling
- 1 LED red drive voltage
- Noise level
- 43 dB 86/188/EEC
- Insulation
- Electrical between power and control
- Electrical connection
- Screw terminal 1.5...4 mm² AWG 14...AWG 10 power supply
- Electrical connection
- Removable screw terminals 1.5...2.5 mm² AWG 14...AWG 12 motor/braking resistor
- Electrical connection
- Screw terminal 0.5...1.5 mm² AWG 18...AWG 14 control
- Tightening torque
- 5.31 lbf.in (0.6 N.m) 5.3 lb/ft power supply
- Tightening torque
- 6.19 lbf.in (0.7 N.m) 7.1 lb/ft motor/braking resistor
- Tightening torque
- 4.42 lbf.in (0.5 N.m) 4.4 lb/ft control
- Supply
- Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %
- Analogue input number
- 3
- Analogue input type
- Current AI3 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration) 250 Ohm 10 bits
- Analogue input type
- Bipolar differential voltage AI2 +/- 10 V DC 30000 Ohm 10 bits
- Analogue input type
- Voltage AI1 0...10 V DC 30000 Ohm 10 bits
- Sampling duration
- 2 ms AO1 analog
- Sampling duration
- 2 ms AI1, AI2, AI3 analog
- Response time
- 2 ms R2A, R2C relay
- Response time
- 2 ms R1A, R1B, R1C relay
- Response time
- 8 ms +/- 0.7 ms LI1...LI6 logic
- Accuracy
- +/- 2 % AO1 for a temperature of -10...60°C
- Accuracy
- +/- 1 % AO1 for a temperature of 25°C
- Accuracy
- +/- 0.5 % AI1, AI2, AI3 for a temperature of 25°C
- Accuracy
- +/- 0.2 % AI1, AI2, AI3 for a temperature of -10...60°C
- Linearity error
- +/- 0.3 % AO1
- Linearity error
- +/- 0.2...0.5 % of maximum value AI1, AI2, AI3
- Analogue output number
- 1
- Analogue output type
- Software-configurable voltage AO1 0...10 V 470 Ohm 10 bits
- Analogue output type
- Software-configurable current AO1 0...20 mA 800 Ohm 10 bits
- Discrete output number
- 3
- Discrete output type
- Logic LO
- Discrete output type
- Configurable relay logic R2A, R2B NO 100000 cycles
- Discrete output type
- Configurable relay logic R1A, R1B, R1C NO/NC 100000 cycles
- Minimum switching current
- 5 mA 24 V DC configurable relay logic
- Maximum switching current
- 5 A 30 V DC resistive cos phi = 1 R2
- Maximum switching current
- 5 A 250 V AC resistive cos phi = 1 R2
- Maximum switching current
- 2 A 30 V DC inductive cos phi = 0.4 R1, R2
- Maximum switching current
- 2 A 250 V AC inductive cos phi = 0.4 R1, R2
- Maximum switching current
- 4 A 30 V DC resistive cos phi = 1 R1
- Maximum switching current
- 3 A 250 V AC resistive cos phi = 1 R1
- Discrete input number
- 7
- Discrete input type
- Safe torque off STO 24...30 V DC 1500 Ohm
- Discrete input type
- Switch-configurable PTC probe LI6 24...30 V DC
- Discrete input type
- Programmable as pulse input 20 kpps LI5 24...30 V DC level 1 PLC
- Discrete input type
- Programmable (sink/source) LI1...LI4 24...30 V DC level 1 PLC
- Discrete input logic
- Positive logic (source) LI1...LI6 11 V
- Discrete input logic
- Negative logic (sink) LI1...LI6 > 19 V
- Acceleration and deceleration ramps
- S
- Acceleration and deceleration ramps
- U
- Acceleration and deceleration ramps
- CUS
- Acceleration and deceleration ramps
- Deceleration ramp automatic stop DC injection
- Acceleration and deceleration ramps
- Deceleration ramp adaptation
- Acceleration and deceleration ramps
- Linear
- Acceleration and deceleration ramps
- Ramp switching
- Braking to standstill
- By DC injection
- Protection type
- Thermal protection drive
- Protection type
- Short-circuit between motor phases drive
- Protection type
- Overheating protection drive
- Protection type
- Overcurrent between output phases and earth drive
- Protection type
- Input phase breaks drive
- Communication port protocol
- CANopen
- Communication port protocol
- Modbus
- Type of connector
- 1 RJ45 Modbus/CANopen on front face
- Physical interface
- 2-wire RS 485 Modbus
- Transmission frame
- RTU Modbus
- Type of polarization
- No impedance Modbus
- Number of addresses
- 1...247 Modbus
- Number of addresses
- 1...127 CANopen
- Method of access
- Slave CANopen
- Electromagnetic compatibility
- Voltage dips and interruptions immunity test IEC 61000-4-11
- Electromagnetic compatibility
- Radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3
- Electromagnetic compatibility
- Electrostatic discharge immunity test level 3 IEC 61000-4-2
- Electromagnetic compatibility
- Electrical fast transient/burst immunity test level 4 IEC 61000-4-4
- Electromagnetic compatibility
- Conducted radio-frequency immunity test level 3 IEC 61000-4-6
- Electromagnetic compatibility
- 1.2/50 µs - 8/20 µs surge immunity test level 3 IEC 61000-4-5
- Width
- 2.36 in (60 mm)
- Height
- 12.8 in (325 mm)
- Depth
- 9.65 in (245 mm)
- Product weight
- 6.61 lb(US) (3 kg)
- Option card
- Communication card Profibus DP V1
- Option card
- Communication card Ethernet/IP
- Option card
- Communication card DeviceNet
- Option card
- Communication card CANopen open style
- Option card
- Communication card CANopen daisy chain
- Functionality
- Mid
- Specific application
- Other applications
Environment
- Standards
- EN 55011 class A group 1
- Standards
- EN 61800-3 environments 1 category C2
- Standards
- EN 61800-3 environments 2 category C2
- Standards
- EN/IEC 61800-3
- Standards
- EN/IEC 61800-5-1
- Product certifications
- CSA
- Product certifications
- C-Tick
- Product certifications
- GOST
- Product certifications
- NOM 117
- Product certifications
- UL
- Marking
- CE
- Pollution degree
- 2 EN/IEC 61800-5-1
- IP degree of protection
- IP20 EN/IEC 61800-5-1
- Vibration resistance
- 1.5 mm peak to peak 3...13 Hz EN/IEC 60068-2-6
- Vibration resistance
- 1 gn 13...200 Hz EN/IEC 60068-2-6
- Shock resistance
- 15 gn 11 ms EN/IEC 60068-2-27
- Relative humidity
- 5...95 % without dripping water IEC 60068-2-3
- Relative humidity
- 5...95 % without condensation IEC 60068-2-3
- Ambient air temperature for operation
- 122...140°F (50...60°C) with derating factor
- Ambient air temperature for operation
- 14...122°F (-10...50°C) without derating
- Ambient air temperature for storage
- -13...158°F (-25...70°C)
- Operating altitude
- 3280.84...9842.52 ft (1000...3000 m) with current derating 1 % per 100 m
- Operating position
- Vertical +/- 10 degree
Ordering and Shipping Details
- Category
- 22152 - ATV312 / ATV32 (.25 THRU 7.5 HP)
- Discount Schedule
- CP4B
- GTIN
- 00785901687634
- Nbr. of units in pkg.
- 1
- Product availability
- Stock - Normally stocked in distribution facility
- Returnability
- Y
- Country of origin
- ID
Offer Sustainability
- Sustainable offer status
- Not Green Premium product
- RoHS (date code: YYWW)
- Compliant - since 1007 -
- RoHS (date code: YYWW)
- Schneider Electric declaration of conformity
- Product environmental profile
- Available
- Product environmental profile
- Download Product Environmental Profile
- Product end of life instructions
- Available
- Product end of life instructions
- Download End of life manual
Contractual Warranty
- Warranty period
- 18 months
Returns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
Recently Viewed Products
- Choosing a selection results in a full page refresh.