SCHNEIDER-ELECTRIC GV2P03KD09BL

Additional Information

Part Number

GV2P03KD09BL

UNSPSC

39121521

Specifications

Product Certifications

GL || UL || LROS (Lloyds register of shipping) || CCC || RINA || BV || GOST || DNV || CSA

[Uc] Control Circuit Voltage

24 V DC

[Ue] Rated Operational Voltage

power circuit <= 690 V AC 25...400 Hz || power circuit <= 300 V DC

Power Dissipation Per Pole

1.56 W AC-1 || 0.2 W AC-3

Average Impedance

2.5 mOhm - Ith 25 A 50 Hz power circuit

Auxiliary Contact Composition

1 NO + 1 NC

[Ith] Conventional Free Air Thermal Current

25 A 60°C power circuit || 10 A 60°C signalling circuit

Phase Failure Sensitivity

yes IEC 60947-4-1

Mounting Support

plate || rail

Control Circuit Type

DC low consumption

Standards

CSA C22.2 No 14 || EN 60947-4-1 || EN 60947-5-1 || IEC 60947-4-1 || IEC 60947-5-1 || UL 508

Safety Reliability Level

B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 || B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1

Contactor Application

resistive load || motor control

Rated Breaking Capacity

250 A 440 V power circuit IEC 60947

Product Or Component Type

motor starter

Irms Rated Making Capacity

250 A 440 V power circuit IEC 60947 || 140 A AC signalling circuit IEC 60947-5-1 || 250 A DC signalling circuit IEC 60947-5-1

Associated Fuse Rating

10 A gG signalling circuit IEC 60947-5-1 || 25 A gG <= 690 V type 1 power circuit || 20 A gG <= 690 V type 2 power circuit

[Uimp] Rated Impulse Withstand Voltage

6 kV IEC 60947

Connections - Terminals

power circuit screw clamp terminals 1 1-4 mm²flexible without cable end || power circuit screw clamp terminals 2 1-4 mm²flexible without cable end || power circuit screw clamp terminals 1 1-4 mm²flexible with cable end || power circuit screw clamp terminals 2 1-2.5 mm²flexible with cable end || power circuit screw clamp terminals 1 1-4 mm²solid without cable end || power circuit screw clamp terminals 2 1-4 mm²solid without cable end || control circuit screw clamp terminals 1 1-4 mm²flexible without cable end || control circuit screw clamp terminals 2 1-4 mm²flexible without cable end || control circuit screw clamp terminals 1 1-4 mm²flexible with cable end || control circuit screw clamp terminals 2 1-2.5 mm²flexible with cable end || control circuit screw clamp terminals 1 1-4 mm²solid without cable end || control circuit screw clamp terminals 2 1-4 mm²solid without cable end

Range

TeSys

Pole Contact Composition

3 NO

Utilisation Category

AC-3 || AC-1 || AC-4

[Ie] Rated Operational Current

9 A 60°C) <= 440 V AC AC-3 power circuit || 25 A 60°C) <= 440 V AC AC-1 power circuit

Maximum Operating Rate

3600 cyc/h 60°C

Suitability For Isolation

yes IEC 60947-1

Tightening Torque

power circuit 1.7 N.m screw clamp terminals flat Ø 6 mm || power circuit 1.7 N.m screw clamp terminals Philips No 2 || control circuit 1.7 N.m screw clamp terminals flat Ø 6 mm || control circuit 1.7 N.m screw clamp terminals Philips No 2

Trip Unit Rating

0.25-0.4 A

Electrical Durability

0.6 Mcycles 25 A AC-1 <= 440 V || 2 Mcycles 9 A AC-3 <= 440 V

Mechanical Durability

30 Mcycles

Poles Description

3P

Operating Time

65.45...88.55 ms closing || 20...30 ms opening

Overvoltage Category

III

Motor Power Kw

2.2 kW 220...230 V AC 50/60 Hz AC-3) || 4 kW 380...400 V AC 50/60 Hz AC-3) || 4 kW 415...440 V AC 50/60 Hz AC-3) || 5.5 kW 500 V AC 50/60 Hz AC-3) || 5.5 kW 660...690 V AC 50/60 Hz AC-3) || 2.2 kW 400 V AC 50/60 Hz AC-4)

Maximum Horse Power Rating

1 hp 230/240 V at AC 50/60 Hz for 1 phase || 2 hp 200/208 V at AC 50/60 Hz for 3 phase || 2 hp 230/240 V at AC 50/60 Hz for 3 phase || 5 hp 460/480 V at AC 50/60 Hz for 3 phase || 7.5 hp 575/600 V at AC 50/60 Hz for 3 phase || 0.33 hp 115 V at AC 50/60 Hz for 1 phase

[Ui] Rated Insulation Voltage

power circuit 690 V IEC 60947-4-1 || power circuit 600 V CSA || power circuit 600 V UL || signalling circuit 690 V IEC 60947-1 || signalling circuit 600 V CSA || signalling circuit 600 V UL

Trip Unit Technology

thermal-magnetic

[Icw] Rated Short-Time Withstand Current

105 A 40°C - 10 s power circuit || 210 A 40°C - 1 s power circuit || 30 A 40°C - 10 min power circuit || 61 A 40°C - 1 min power circuit || 100 A - 1 s signalling circuit || 120 A - 500 ms signalling circuit || 140 A - 100 ms signalling circuit

Protective Cover

with

Complementary

Non-Overlap Time

1.5 ms on de-energisation between NC and NO contact || 1.5 ms on energisation between NC and NO contact

Minimum Switching Current

5 mA signalling circuit

Line Rated Current

0.4 A

[Ue] Rated Operational Voltage

690 V AC 50/60 Hz IEC 60947-2

Connections - Terminals

screw clamp terminals 2 1-6 mm² solid || screw clamp terminals 2 1.5-6 mm² flexible without cable end || screw clamp terminals 2 1-4 mm² flexible with cable end

Control Circuit Voltage Limits

drop-out 0.1...0.3 Uc DC 60°C) || operational 0.8...1.25 Uc DC 60°C)

Rated Duty

continuous IEC 60947-4-1

Contact Compatibility

M5

Magnetic Tripping Current

5-5 A

Contactor Coil Voltage

24 V DC low consumption

[Ith] Conventional Free Air Thermal Current

0.4 A IEC 60947-4-1

Hold-In Power Consumption In W

2.4-2.4 W 20°C

Motor Power Kw

0.09-0.09 kW 400/415 V AC 50/60 Hz

Insulation Resistance

> 10 MOhm signalling circuit

Maximum Operating Rate

25 cyc/h

Operating Position

any position

Power Range

1.1-2 kW 200-240 V 3 phase || 2.2-3 kW 380-440 V 3 phase || 4-6 kW 380-440 V 3 phase || 4-6 kW 480-500 V 3 phase

Utilisation Category

AC-3 IEC 60947-4-1 || category A IEC 60947-2

Fixing Mode

35 mm symmetrical DIN rail clipped || panel screwed with 2 x M4 screws)

[Uimp] Rated Impulse Withstand Voltage

6 kV IEC 60947-2

[Ics] Rated Service Short-Circuit Breaking Capacity

100 % 690 V AC 50/60 Hz IEC 60947-2 || 100 % 500 V AC 50/60 Hz IEC 60947-2 || 100 % 230/240 V AC 50/60 Hz IEC 60947-2 || 100 % 440 V AC 50/60 Hz IEC 60947-2 || 100 % 400/415 V AC 50/60 Hz IEC 60947-2

Control Type

rotary knob

Coil Technology

built-in bidirectional peak limiting diode suppressor

Power Dissipation Per Pole

2.5 W

Electrical Durability

100000 cycles AC-3 440 V

Time Constant

40 ms

Motor Starter Type

direct on-line contactor

Minimum Switching Voltage

17 V signalling circuit

Breaking Capacity

100 kA Icu 230/240 V AC 50/60 Hz IEC 60947-2 || 100 kA Icu 400/415 V AC 50/60 Hz IEC 60947-2 || 100 kA Icu 440 V AC 50/60 Hz IEC 60947-2 || 100 kA Icu 500 V AC 50/60 Hz IEC 60947-2 || 100 kA Icu 690 V AC 50/60 Hz IEC 60947-2

Mechanical Durability

100000 cycles

Signalling Circuit Frequency

25...400 Hz

[Ui] Rated Insulation Voltage

690 V AC 50/60 Hz IEC 60947-2

Tightening Torque

1.7 N.m screw clamp terminals

Direct Connector

without

Inrush Power In W

2.4-2.4 W 20°C)

Auxiliary Contacts Type

mechanically linked 1 NO + 1 NC IEC 60947-5-1 || mirror contact 1 NC IEC 60947-4-1

Network Frequency

50/60 Hz IEC 60947-4-1

Offer Sustainability

Rohs Exemption Information

Yes

Mercury Free

Yes

Reach Regulation

Reference contains Substances of Very High Concern above the threshold

California Proposition 65

WARNING: This product can expose you to chemicals including: Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

China Rohs Regulation

Product out of China RoHS scope. Substance declaration for your information.

Eu Rohs Directive

Compliant

Environment

Ik Degree Of Protection

IK04

Mechanical Robustness

vibrations contactor open2 Gn, 5...300 Hz || vibrations contactor closed4 Gn, 5...300 Hz || shocks contactor open10 Gn for 11 ms || shocks contactor closed15 Gn for 11 ms

Ambient Air Temperature For Operation

-20-60°C

Ambient Air Temperature For Operation

-5-60°C

Height

77 mm

Standards

NF C 63-120 || IEC 60947-4-1 || NF C 79-130 || IEC 60947-2 || NF C 63-650 || CSA C22.2 || VDE 0113 || VDE 0660 || EN 60204 || IEC 60947-1 || UL 508

Climatic Withstand

IACS E10

Pollution Degree

3

Product Certifications

EZU || ATEX || EAC || UL || TSE || CCC || RINA || LROS (Lloyds register of shipping) || BV || GL || CSA || UL 508 type E || DNV

Net Weight

0.48 kg

Depth

97 mm

Flame Retardance

V1 conforming to UL 94

Ambient Air Temperature For Storage

-60-80°C

Ambient Air Temperature For Storage

-40-80°C

Width

45 mm

Height

89 mm

Protective Treatment

TH

Ip Degree Of Protection

IP20 IEC 60529

Ip Degree Of Protection

IP20 front face IEC 60529

Operating Altitude

6561.68 ft (2000 m)

Operating Altitude

9842.52 ft (3000 m) without derating

Fire Resistance

850°C IEC 60695-2-1

Depth

95 mm

Permissible Ambient Air Temperature Around The Device

-40-70°C at Uc