SCHNEIDER-ELECTRIC ATV212WD11N4

Additional Information

Part Number

ATV212WD11N4

UNSPSC

39122001

Tariff Code

8504404000

Country of Origin

FR

Environment

Product Certifications

C-tick || UL || NOM 117 || CSA

Standards

IEC 61800-3 environments 1 category C3 || IEC 61800-3 environments 1 category C2 || IEC 61800-3 category C2 || IEC 61800-3 environments 2 category C1 || IEC 61800-3 category C3 || IEC 61800-5-1 || IEC 61800-3 environments 1 category C1 || IEC 61800-3 environments 2 category C2 || IEC 61800-3 environments 2 category C3 || EN 55011 class A group 1 || EN 61800-3 category C3 || IEC 61800-3

Electromagnetic Compatibility

electrostatic discharge immunity test level 3 IEC 61000-4-2 || radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge immunity test level 3 IEC 61000-4-5 || conducted radio-frequency immunity test level 3 IEC 61000-4-6 || voltage dips and interruptions immunity test IEC 61000-4-11

Ambient Air Temperature For Operation

-10-40°C without derating) || 40-50°C with derating factor)

Shock Resistance

15 gn 11 ms IEC 60068-2-27

Environmental Characteristic

classes 3C1 IEC 60721-3-3 || classes 3S2 IEC 60721-3-3

Marking

CE

Vibration Resistance

1.5 mm 3-13 Hz)IEC 60068-2-6 || 1 gn 13-200 Hz)EN/IEC 60068-2-8

Noise Level

57.4 dB 86/188/EEC

Pollution Degree

2 IEC 61800-5-1

Regulation Loop

adjustable PI regulator

Ambient Air Temperature For Storage

-25-70°C

Relative Humidity

5-95 % without condensation IEC 60068-2-3 || 5-95 % without dripping water IEC 60068-2-3

Assembly Style

with heat sink

Ip Degree Of Protection

IP55 IEC 61800-5-1 || IP55 IEC 60529

Operating Altitude

3280.84...9842.52 ft (1000...3000 m) limited to 2000 m for the Corner Grounded distribution network with current derating 1 % per 100 m || <= 3280.84 ft (1000 m) without derating

Operating Position

vertical +/- 10 degree

Contractual warranty

Warranty

18 months

Offer Sustainability

Rohs Exemption Information

Yes

Mercury Free

Yes

Environmental Disclosure

ENVPEP111264EN

Sustainable Offer Status

Green Premium product

Reach Regulation

Reference contains Substances of Very High Concern above the threshold

California Proposition 65

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Weee

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

China Rohs Regulation

X

Circularity Profile

ENVEOLI111252EN

Eu Rohs Directive

Pro-active compliance (Product out of EU RoHS legal scope)

Complementary

Prospective Line Isc

22 kA

Electrical Connection

VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES terminal 2.5-2.5 mm² / AWG 14 || L1/R, L2/S, L3/T terminal 16-16 mm² / AWG 4

Network Frequency

47.5...63 Hz

Discrete Input Logic

positive logic (source) F, R, RES), <= 5 V, >;= 11 V || negative logic (sink) F, R, RES), >;= 16 V, <= 10 V

Type Of Cable

without mounting kit 1 IEC cable 45°C, copper 90°C / XLPE/EPR || without mounting kit 1 IEC cable 45°C, copper 70°C / PVC || with UL Type 1 kit 3 UL 508 cable 40°C, copper 75°C / PVC

Height

560 mm

Acceleration And Deceleration Ramps

linear adjustable separately from 0.01 to 3200 s || automatic based on the load

Analogue Output Type

FM switch-configurable voltage 0...10 V DC 7620 Ohm 10 bits || FM switch-configurable current 0...20 mA 970 Ohm 10 bits

Speed Drive Output Frequency

0.5-200 Hz

Discrete Output Type

configurable relay logic FLA, FLC) NO - 100000 cycles || configurable relay logic FLB, FLC) NC - 100000 cycles || configurable relay logic RY, RC) NO - 100000 cycles

Transmission Frame

RTU

Torque Accuracy

+/- 15 %

Asynchronous Motor Control Profile

voltage/frequency ratio, 5 points || voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo) || voltage/frequency ratio - Energy Saving, quadratic U/f || flux vector control without sensor, standard || voltage/frequency ratio, 2 points

Maximum Switching Current

5 A 250 V AC resistive cos phi = 1 L/R = 0 ms FL, R) || 5 A 30 V DC resistive cos phi = 1 L/R = 0 ms FL, R) || 2 A 250 V AC inductive cos phi = 0.4 L/R = 7 ms FL, R) || 2 A 30 V DC inductive cos phi = 0.4 L/R = 7 ms FL, R)

Communication Service

write multiple registers (16) 2 words maximum || read device identification (43) || time out setting from 0.1 to 100 s || write single register (06) || monitoring inhibitable || read holding registers (03) 2 words maximum

Transient Overtorque

120-120 % of nominal motor torque +/- 10 % 60 s

Insulation Resistance

>;= 1 mOhm 500 V DC for 1 minute

Response Time

FM 2 ms +/- 0.5 ms analog || FLA, FLC 7 ms +/- 0.5 ms discrete || FLB, FLC 7 ms +/- 0.5 ms discrete || RY, RC 7 ms +/- 0.5 ms discrete

Data Format

8 bits, 1 stop, odd even or no configurable parity

Apparent Power

17.1 kVA 380 V

Dielectric Strength

3535 V DC between earth and power terminals || 5092 V DC between control and power terminals

Net Weight

30.3 kg

Type Of Polarization

no impedance

Frequency Resolution

display unit 0.1 Hz || analog input 0.024/50 Hz

Accuracy

+/- 0.6 % VIA) for a temperature variation 60°C || +/- 0.6 % VIB) for a temperature variation 60°C || +/- 1 % FM) for a temperature variation 60°C

Switching Frequency

6...16 kHz adjustable || 12...16 kHz with derating factor

Maximum Transient Current

24.8 A 60 s

Connector Type

1 RJ45 || 1 open style

Analogue Input Number

2

Functionality

mid

Motor Slip Compensation

automatic whatever the load || adjustable || not available in voltage/frequency ratio motor control

Discrete Output Number

2

Minimum Switching Current

3 mA 24 V DC configurable relay logic

Analogue Output Number

1

Physical Interface

2-wire RS 485

Continuous Output Current

22.5 A 380 V || 22.5 A 460 V

Number Of Addresses

1-247

Tightening Torque

0.6 N.m VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES) || 3 N.m, 26.5 lb.in L1/R, L2/S, L3/T)

Discrete Input Type

F programmable 24 V DC level 1 PLC 4700 Ohm || R programmable 24 V DC level 1 PLC 4700 Ohm || RES programmable 24 V DC level 1 PLC 4700 Ohm

Speed Range

1-10

Isolation

electrical between power and control

Local Signalling

for DC bus energized 1 LED (red)

Linearity Error

VIA +/- 0.15 % of maximum value input || VIB +/- 0.15 % of maximum value input || FM +/- 0.2 % output

Specific Application

HVAC

Output Voltage

<= power supply voltage

Nominal Switching Frequency

12 kHz

Width

290 mm

Transmission Rate

9600 bps or 19200 bps

Braking To Standstill

by DC injection

Depth

315 mm

Protection Type

overheating protection drive || thermal power stage drive || short-circuit between motor phases drive || input phase breaks drive || overcurrent between output phases and earth drive || overvoltages on the DC bus drive || break on the control circuit drive || against exceeding limit speed drive || line supply overvoltage and undervoltage drive || line supply undervoltage drive || against input phase loss drive || thermal protection motor || motor phase break motor || with PTC probes motor

Supply

internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 A overload and short-circuit protection || internal supply 24 V DC 21-27 V), <200 A overload and short-circuit protection

Analogue Input Type

VIA switch-configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bits || VIB configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bits || VIB configurable PTC probe 0...6 probes 1500 Ohm || VIA switch-configurable current 0...20 mA 250 Ohm 10 bits

Sampling Duration

2 ms +/- 0.5 ms F discrete || 2 ms +/- 0.5 ms R discrete || 2 ms +/- 0.5 ms RES discrete || 3.5 ms +/- 0.5 ms VIA analog || 22 ms +/- 0.5 ms VIB analog

Speed Accuracy

+/- 10 % of nominal slip 0.2 Tn to Tn

Option Card

communication card LonWorks

Specifications

Product Destination

asynchronous motors

Range Of Product

Altivar 212

Product Or Component Type

variable speed drive

Ip Degree Of Protection

IP55

Motor Power Kw

11 kW

Phase

3 phase

Line Current

16.9 A 480 V || 21.2 A 380 V

[Us] Rated Supply Voltage

380...480 V - 15...10 %

Communication Port Protocol

BACnet || METASYS N2 || Modbus || LonWorks || APOGEE FLN

Supply Voltage Limits

323-528 V

Product Specific Application

pumps and fans in HVAC

Emc Filter

Class C2 EMC filter integrated

Maximum Horse Power Rating

15 hp

Device Short Name

ATV212

Supply Frequency

50...60 Hz - 5...5 %