SCHMERSAL 103001537

Additional Information

Part Number

103001537

ETIM

Group Code : EG000026

Group Description : Sensors

Class Description : End switch

Class Code : EC000030

Version : 7

Electrical data

Time to readiness, maximum

5,000 ms

Switching frequency, maximum

1 Hz

Electrical data - AS-Interface specification

AS-i Specification

Safety-Slave

AS-i Version

V 3.0

AS-i Profile

S-0.B.F.E

AS-i, IO-Code

0x0

AS-i, ID-Code

0xB

AS-i, ID-Code1

0xF

AS-i, ID-Code2

0xE

AS-i Input, Channel 1

Data bits DI 0 / DI 1 = dynamic code transmission

AS-i Input, Channel 2

Data bits DI 2 / DI 3 = dynamic code transmission

AS-i Outputs, DO 0 ¦ DO 3

No Function

AS-i Parameter bits, P0

Actuator in

AS-i Parameter bits, P1

Enabling inhibit (tamper protection time) active (FID))

AS-i Parameter bits, P2

No function

AS-i Parameter bits, P3

Internal device error (FID)

Note (AS-i Parameter bits)

Set the parameter outputs to "1111" (0xF) | FID: periphery error

AS-i Input module address

0

Note (AS-i Input module address)

Preset to address 0, can be changed through AS-interface bus master or hand-held programming device

Mechanical data - Dimensions

Length of sensor

22 mm

Width of sensor

106.3 mm

Height of sensor

25 mm

Pin assignment

PIN 1

AS-Interface +

PIN 2

n.c. (‰¤ 30 VDC)

PIN 3

AS-Interface -

PIN 4

n.c. (‰¤ 30 VDC)

Ambient conditions - Insulation values

Rated insulation voltage U

32 VDC

Rated impulse withstand voltage U

0.8 kV

Overvoltage category

III

Degree of pollution

3

Scope of delivery

Scope of delivery

Actuator must be ordered separately.

General data - Features

Latching

Yes

Safety functions

Yes

Integral system diagnostics, status

Yes

Number of actuating directions

3

General data

Standards

EN IEC 62026-2 | EN ISO 13849-1 | EN ISO 14119 | EN IEC 60947-5-3 | EN IEC 61508

Coding

Individual coding

Coding level according to EN ISO 14119

High

Working principle

RFID

Frequency band RFID

125 kHz

Transmitter output RFID, maximum

-6 dB/m

Housing construction form

Block

Installation conditions (mechanical)

not flush

Enclosure material

Plastic, glass-fibre reinforced thermoplastic, self-extinguishing

Reaction time, maximum

100 ms

Duration of risk, maximum

200 ms

Safety classification

Standards

EN ISO 13849-1 | EN IEC 61508

Performance Level, up to

e

Category

4

PFH value

5.13 x 10�»¹�° /h

PFD value

3.24 x 10�»�µ

Safety Integrity Level (SIL), suitable for applications in

3

Mission time

20 Year(s)

Electrical data - AS Interface

Rated operating voltage

18 ... 31.6 VDC (Protection against polarity reversal)

AS-i Current consumption, maximum

100 mA

Ambient conditions

Degree of protection

IP65 | IP67 | IP69

Ambient temperature

-25 ... +70°C

Storage and transport temperature, minimum

-25°C

Storage and transport temperature, maximum

+85°C

Relative humidity, maximum

93 %

Note (Relative humidity)

non-condensing | non-icing

Resistance to vibrations

10 ¦ 55 Hz, amplitude 1 mm

Restistance to shock

30 g / 11 ms

Protection class

III

Permissible installation altitude above sea level, maximum

2,000 m

Mechanical data - Connection technique

Termination

Connector plug M12, 4-pole, (A-coding)

Mechanical data - Switching distances according EN IEC 60947-5-3

Switch distance, typical

12 mm

Assured switching distance "ON" S

10 mm

Assured switching distance "OFF" S

20 mm

Mechanical data

Mechanical life, minimum

1,000,000 Operations

Note (Mechanical life)

Actuating speed < 0.25 m/s | Operations for door weights ‰¤ 5 kg

Hysteresis (Switching distance), maximum

2 mm

Repeat accuracy R

0.5 mm

Note (Repeat accuracy R)

Axial offset: The long side allows for a maximum height misalignment (x) of sensor and actuator of 8 mm (e.g. mounting tolerance or due to guard door sagging). The axial misalignment (y) is max. ± 18 mm (see figure: Operating principle).Minimum clearance between two sensor systems 100 mm.

Latching force, approx.

18 N

Type of the fixing screws

2x M4 (cylinder head screws with washers DIN 125A / form A)

Tightening torque of the fixing screws, minimum

2.2 Nm

Tightening torque of the fixing screws, maximum

2.5 Nm

Accessory

Recommendation (actuator)

RST 36-1-R

Approvals - Standards

Certificates

TÜV | cULus | ASi-SaW

Status indication

Note (LED switching conditions display)

(1) green/red LED (AS-i Duo LED):Supply voltage / communication error / slave address = 0 / periphery error detected / Tamper protection time active | (2) yellow LED: device condition (enabling status) / hysteresis signal / device error