SCHMERSAL 101210666

Additional Information

Part Number

101210666

ETIM

Group Code : EG000026

Group Description : Sensors

Class Description : Position switch with guard locking

Class Code : EC002593

Version : 7

Electrical data

Switching frequency

1,000 /h

Electrical data - AS-Interface specification

AS-i Specification

Safety-Slave

AS-i Version

V 2.1

AS-i Profile

S-7.B.F.E

AS-i, IO-Code

0x7

AS-i, ID-Code

0xB

AS-i, ID-Code1

0xF

AS-i, ID-Code2

0xE

AS-i Input, Channel 1

Data bits DI 0 / DI 1 = dynamic code transmission

AS-i Input, Channel 2

Data bits DI 2 / DI 3 = dynamic code transmission

AS-i Outputs, DO 0

Solenoid control

AS-i Outputs, DO 1

No Function

AS-i Outputs, DO 2

No Function

AS-i Outputs, DO 3

No Function

AS-i Parameter bits, P0

Actuator detected

AS-i Parameter bits, P1

Solenoid interlock locked

AS-i Parameter bits, P2

Magnet voltage in tolerance range

AS-i Parameter bits, P3

Error message - locking/unlocking of the solenoid interlock blocked

Note (AS-i Parameter bits)

Set the parameter outputs to "1111" (0xF) | FID: periphery error

AS-i Input module address

0

Note (AS-i Input module address)

Preset to address 0, can be changed through AS-interface bus master or hand-held programming device

Note

Note (General)

Interlocks with the power to lock principle may only be used in special cases after a thorough evaluation of the accident risk, since the guarding device can immediately be opened on failure of the electrical power supply or when the main switch is opened.

Note (Emergency exit)

For cases of danger | Actuation from within the hazardous area

Mechanical data - Dimensions

Length of sensor

30 mm

Width of sensor

130 mm

Height of sensor

90 mm

Pin assignment

PIN 1

AS-i +

PIN 2

Aux - (P)

PIN 3

AS-Interface -

PIN 4

Aux + (P)

Ambient conditions - Insulation values

Rated insulation voltage U

32 VDC

Rated impulse withstand voltage U

0.8 kV

Overvoltage category

III

Degree of pollution

3

Scope of delivery

Scope of delivery

Actuator must be ordered separately.

General data - Features

Power to lock

Yes

Actuator monitored

Yes

Emergency exit

Yes

Integral system diagnostics, status

Yes

Number of actuating directions

3

General data

Standards

EN IEC 62026-2 | EN ISO 13849-1 | EN IEC 60947-5-1 | EN IEC 61508

Coding level according to EN ISO 14119

Low

Working principle

electromechanical

Enclosure material

Plastic, glass-fibre reinforced thermoplastic, self-extinguishing

Gross weight

485 g

Reaction time, maximum

100 ms

Safety classification

Standards

EN ISO 13849-1 | EN IEC 61508

Performance Level, up to

c

Category

1

PFH value

1.14 x 10�»�¶ /h

Note (PFH-value)

up to max. 100,000 switching cycles/year

Safety Integrity Level (SIL), suitable for applications in

1

Mission time

20 Year(s)

Please note:

Einsetzbar wenn ein Fehlerausschluss f¼r eine gefahrbringende Besch¤digung der 1-kanaligen Mechanik zul¤ssig ist und ein ausreichender Manipulationsschutz gew¤hrleistet ist.

Performance Level, up to

d

Category

3

PFH value

1.01 x 10�»�· /h

Safety Integrity Level (SIL), suitable for applications in

2

Electrical data - AS Interface

Rated operating voltage

26.5 ... 31.6 VDC (Protection against polarity reversal)

AS-i Current consumption, maximum

100 mA

Other data

Note (applications)

sliding safety guard | removable guard | hinged safety guard

Ambient conditions

Degree of protection

IP67

Ambient temperature

-25 ... +60°C

Storage and transport temperature, minimum

-25°C

Storage and transport temperature, maximum

+85°C

Relative humidity, minimum

30 %

Relative humidity, maximum

95 %

Note (Relative humidity)

non-condensing | non-icing

Resistance to vibrations

10 Hz ... 150 Hz, amplitude 0.35 mm

Restistance to shock

30 g / 11 ms

Protection class

II

Permissible installation altitude above sea level, maximum

2,000 m

Mechanical data - Connection technique

Termination

Connector plug M12, 4-pole, (A-coding)

Connector position

Right

Mechanical data

Mechanical life, minimum

1,000,000 Operations

Actuating play in direction of actuation

5.5 mm

Holding force F

2,000 N

Holding force F

2,600 N

Latching force

30 N

Actuating speed, maximum

2 m/s

Mounting

Screws

Type of the fixing screws

3x M6

Approvals - Standards

Certificates

TœV | cULus | ASi-SaW

Electrical data - Auxiliary voltage

Operating voltage

24 VDC -15 % / +10 % (stabilised PELV power supply)

Current consumption

500 mA

Rated operating voltage

24 VDC

Status indication

Note (LED switching conditions display)

(1) LED yellow: Channel 2 / AS-i SaW Bit 2.3 | (2) LED green/red (AS-i duo LED): Supply voltage / communication error / slave address = 0 / periphery error detected | (3) LED yellow: Channel 1 / AS-i SaW Bit 0.1