Additional Information
- Part Number
- 101209841
- ETIM
- Group Code : EG000026
- Group Description : Sensors
- Class Description : End switch
- Class Code : EC000030
- Version : 7
Electrical data
- Operating voltage
- 24 VDC -15 % / +10 %
- No-load supply current I
- 50 mA
- Rated operating voltage
- 24 VDC
- Operating current
- 1,100 mA | 500 mA
- Required rated short-circuit current
- 100 A
- Switching frequency, approx.
- 3 Hz
Note
- Note (General)
- Evaluation requirements: The switch-off pauses of 250 µs - 1500 µs must be tolerated by the evaluation. | The switch-off time of the safety sensor of 250 ¼s is additionally extended according the cable length and the capacity of the cable used. Typically a switch off time of 500 ¼s with 100 m of connection cable is reached.
Mechanical data - Dimensions
- ISO thread of the sensor
- M30
- Length of sensor
- 101 mm
Pin assignment
- PIN 1
- A1 Ue Brown
- PIN 2
- X1 safety input 1: Violet
- PIN 3
- A2 GND Blue
- PIN 4
- Y1 Safety output 1 Black
- PIN 5
- OUT diagnostic output: Grey
- PIN 6
- X2 Safety input 2 White
- PIN 7
- Y2 Safety output 2 red
Ambient conditions - Insulation values
- Rated insulation voltage U
- 32 VAC/DC
- Rated impulse withstand voltage U
- 0.8 kV
- Overvoltage category
- III
- Degree of pollution
- 3
Scope of delivery
- Scope of delivery
- Actuator must be ordered separately.
- Scope of delivery of mounting material
- 2x Mounting accessories Nuts M30
General data - Features
- Diagnostic output
- Yes
- Short circuit detection
- Yes
- Cross-circuit detection
- Yes
- Safety functions
- Yes
- Cascadable
- Yes
- Integral system diagnostics, status
- Yes
- Number of LEDs
- 1
- Number of semi-conductor outputs with signaling function
- 1
- Number of fail-safe digital outputs
- 2
- Number of series-wiring of sensors
- 16
General data
- Standards
- EN IEC 60947-5-3 | EN IEC 61508
- Working principle
- inductive
- Housing construction form
- Cylinder, thread
- Installation conditions (mechanical)
- not flush
- Sensor topology
- Sensor for series wiring
- Enclosure material
- Nickel plated brass
- Active area
- Plastic
- Gross weight
- 248 g
- Reaction time, maximum
- 30 ms
- Duration of risk, maximum
- 30 ms
Safety classification
- Standards
- EN ISO 13849-1 | EN IEC 60947-5-3 | EN IEC 61508
- Performance Level, up to
- e
- Category
- 4
- PFH value
- 2.50 x 10�»�¹ /h
- Safety Integrity Level (SIL), suitable for applications in
- 3
- Mission time
- 20 Year(s)
Electrical data - Safety digital outputs
- Output current, (fail-safe output), maximum
- 0.5 A
- Design of control elements
- p-type
- Voltage drop U
- 0.5 V
- Leakage current I
- 0.5 mA
- Voltage, Utilisation category DC-12
- 24 VDC
- Current, Utilisation category DC-12
- 0.5 A
- Voltage, Utilisation category DC-13
- 24 VDC
- Current, Utilisation category DC-13
- 0.5 A
Ambient conditions
- Degree of protection
- IP65 | IP67
- Ambient temperature
- -25 ... +55°C
- Storage and transport temperature, minimum
- -25°C
- Storage and transport temperature, maximum
- +85°C
- Resistance to vibrations
- 10 ¦ 55 Hz, amplitude 1 mm
- Restistance to shock
- 30 g / 11 ms
- Protection class
- II
Mechanical data - Connection technique
- Termination
- Cable
- Note (length of the sensor chain)
- Cable length and cross-section change the voltage drop dependiing on the output current
- Length of cable
- 2 m
- Wire cross-section
- 0.25 mm
- Wire cross-section
- 23 AWG
Electrical data - Diagnostic outputs
- Design of control elements
- p-type
- Voltage drop U
- 4 V
- Voltage, Utilisation category DC-12
- 24 VDC
- Current, Utilisation category DC-12
- 0.05 A
- Voltage, Utilisation category DC-13
- 24 VDC
- Current, Utilisation category DC-13
- 0.05 A
Mechanical data - Switching distances according EN IEC 60947-5-3
- Nominal switching distance S
- 12 mm | 15 mm
- Assured switching distance "ON" S
- 10 mm | 12 mm
- Assured switching distance "OFF" S
- 16 mm | 19 mm
Mechanical data
- Actuating panels
- Actuation from top
- Active area
- front side
- Switching distance actuator
- Actuator CST 30-1: 12 mm | Actuator CST 30-1: 15 mm | Actuator CST 30-1: 19 mm | Actuator CST 34-S-3: 10 mm | Actuator CST 34-S-3: 12 mm | Actuator CST 34-S-3: 16 mm
- Hysteresis (Switching distance), maximum
- 2 mm
- Repeat accuracy R
- 1 mm
Accessory
- Recommendation (actuator)
- CST 34-S-3 | CST 30-1
- Recommended safety switchgear
- PROTECT PSC1 | SRB-E-301ST | SRB-E-201LC
Approvals - Standards
- Certificates
- UKCA
Electrical data - Electromagnetic compatibility (EMC)
- Interfering radiation
- IEC 61000-6-4
- EMC rating
- IEC 61000-6-2