SCHMERSAL 101186842

Additional Information

Part Number

101186842

ETIM

Group Code : EG000026

Group Description : Sensors

Class Description : Magnetic proximity switch

Class Code : EC002544

Version : 7

Electrical data

Switching voltage, maximum

200 VAC

Switching current, maximum

1 A

Switching capacity, maximum

30 W

Switching capacity, maximum

30 VA

Switching element

Opener (NC)

Bounce duration, maximum

0.2 ms

Switching frequency, maximum

300 Hz

Note

Note (General)

The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets. | When the switches and actuators come together, the colours must coincide: Red (S) to red (S) and green (N) to green (N). This does not apply to the bistable contact. | The switch is to be mounted on iron with a non-magnetic layer of at least 20 mm.

Mechanical data - Dimensions

Diameter of sensor

10.7 mm

Length of sensor

71 mm

Scope of delivery

Scope of delivery

Actuator must be ordered separately.

Electrical data - Digital Output

Design of control elements

Reed contacts

General data - Features

Suitable for elevators

Yes

Bias magnet

Yes

Number of normally closed (NC)

1

General data

Working principle

Magnetic drive

Housing construction form

Cylinder, thread

Enclosure material

Glass-fibre, reinforced thermoplastic

Gross weight

30 g

Ambient conditions

Degree of protection

IP67

Ambient temperature

-25 ... +70°C

Resistance to vibrations

10 … 55 Hz, amplitude 1 mm

Restistance to shock

30 g / 11 ms

Mechanical data - Connection technique

Termination

Cable

Length of cable

1 m

Wire cross-section

0.25 mm

Wire cross-section

23 AWG

Material of the Cable mantle

LiYY

Mechanical data - Switching distances according EN IEC 60947-5-3

Switching distance S

5 mm … 55 mm | BP 10S = 5 mm | 2 x BP 10S = 10 mm | BP 15S = 6 mm | BP 34S = 20 mm | BP 20S = 15 mm | BP 31S = 15 mm | BP 11S = 5 mm | 2 x BP 11S = 15 mm | BP 12S = 10 mm | 2 x BP 12S = 25 mm | BP 21S = 30 mm | 2 x BP 21S = 20 ... 55 mm | BP 22S = 25 mm | 2 x BP 22S = 15 ... 55 mm | BE 20 S = 6 mm

Note (Switching distance Sn)

Actuating distance up to 55 mm depending on actuating magnet and version. The specified switching distances are applicable for the actuation of individually mounted components without ferromagnetic influence. A change of the distance, either positive or negative, is possible due to ferromagnetic influences. The mutual interference between multiple actuating magnets must be observed.

Mechanical data

Actuating panels

front side

Actuating element

Magnet

Mechanical life, minimum

10,000,000 Operations

Repeat accuracy R

0.3 mm

Actuating speed, maximum

18 m/s

Mounting

central with threated flange M12 x 1

Tightening torque of nuts, maximum

0.9 Nm

Accessory

Recommendation (actuator)

BP 10 S | 2x BP 10 S | BP 15 S | BP 34 S | BP 20 S | BP 31 S | BP 11 S | 2x BP 11 S | BP 12 S | 2x BP 12S | BP 21 S | 2x BP 21 S | BP 22 S | 2x BP 22 S | BE 20 S

Recommendation (actuator, lift switchgear)

BP 10 | 2 x BP 10 | BP 15 | BP 34