SCHMERSAL 101182561

Additional Information

Part Number

101182561

ETIM

Group Code : EG000024

Group Description : PLC's

Class Description : Fieldbus, decentr. periphery - digital I/O module

Class Code : EC001599

Version : 7

Electrical data

Current consumption

50 mA

Electrical data - AS-Interface specification

AS-i Version

V 2.1

AS-i Profile

S-0.B.F.E

AS-i, IO-Code

0x7

AS-i, ID-Code

0xB

AS-i, ID-Code1

0xF

AS-i, ID-Code2

0xE

AS-i Input, Channel 1

Data bits DI 0 / DI 1 = dynamic code transmission

AS-i Input, Channel 2

Data bits DI 2 / DI 3 = dynamic code transmission

AS-i Outputs, DO 0 … DO 3

No Function

AS-i Parameter bits, P0 ... P3

No function

AS-i Parameter bits, P3

Authorised operation canal 1 + 2

Note (AS-i Parameter bits)

Set the parameter outputs to "1111" (0xF)

AS-i Input module address

0

Note (AS-i Input module address)

Preset to address 0, can be changed through AS-interface bus master or hand-held programming device

Mechanical data - Dimensions

Diameter of sensor

28 mm

Height of sensor

86.5 mm

Pin assignment

Connection

ST1 male connector / power supply for Safety light grids and curtains

PIN 1

+ 24 VDC

PIN 2

n.c.

PIN 3

GND

PIN 4

n.c.

PIN 5

FE (functional earth connection)

Connection

ST2 female connector / Safety light grids and curtains

PIN 2

OSSD 1

PIN 4

OSSD 2

Ambient conditions - Insulation values

Rated insulation voltage U

32 VDC

Rated impulse withstand voltage U

0.8 kV

Overvoltage category

III

Degree of pollution

3

General data - Features

Cross-circuit detection

Yes

Integral system diagnostics, status

Yes

Number of pre-wired cable

2

General data

Standards

EN 50295 | EN ISO 13849-1 | EN IEC 61508 | EN IEC 61496-1

Connector (electric)

AS-i connection: connector plug M12, 4-pole

Enclosure material

Plastic, glass-fibre reinforced thermoplastic, self-extinguishing

Gross weight

185 g

Reaction time, maximum

20 ms

Safety classification

Standards

EN IEC 61508

Performance Level, up to

e

Category

4

PFH value

1.74 x 10?? /h

Safety Integrity Level (SIL), suitable for applications in

3

Mission time

20 Year(s)

Electrical data - AS Interface

Rated operating voltage

26.5 ... 31.6 VDC (Protection against polarity reversal)

Wiring example

Note (Wiring diagram)

The Opto-Tube is directly connected to the receiver module (ST2). The receiver module is supplied with 24 V DC via the connector (ST1). | The Opto-Tube itself is connected via the M12 connector (ST) to the AS-i network. Before hand the module has to be programmed with an individual address (1 - 31). | The emitter module has to be wired up separately Please observe the corresponding SLC/SLG documentation (test signal). | The wiring diagram shows an active optoelectronic device (AOPD) (type SLC/SLG 420) with a safety input module AST LC ST-AS (Opto-Tube) connected to the AS-i Safety at Work system.

Ambient conditions

Degree of protection

IP67

Ambient temperature

-25 ... +60 °C

Storage and transport temperature, minimum

-25 °C

Storage and transport temperature, maximum

+85 °C

Relative humidity, minimum

30 %

Relative humidity, maximum

95 %

Note (Relative humidity)

non-condensing

Protection class

II

Approvals - Standards

Certificates

cULus

Status indication

Note (LED switching conditions display)

(1) LED green: Supply voltage | (2) LED red: Communication error | (3) LED yellow: Enabling status OSSD 1/2