SCHMERSAL 101181065

Additional Information

Part Number

101181065

ETIM

Group Code : EG000026

Group Description : Sensors

Class Description : End switch

Class Code : EC000030

Version : 7

Electrical data

No-load supply current I

100 mA

Operating current

600 mA

Required rated short-circuit current

100 A

Note (Electrical data, Fuse rating)

(Circuit breaker)

Switching frequency, approx.

3 Hz

Note

Note (General)

Evaluation requirements: dual-channel safety input, suitable for p-type sensors with NO function. The safety-monitoring module must tolerate internal functional tests of the sensors with cyclic switch-off of the sensor outputs for max. 0.5 ms. Short-circuit recognition by the evaluation is not necessary.

Mechanical data - Dimensions

Length of sensor

35 mm

Width of sensor

27 mm

Height of sensor

108.2 mm

Pin assignment

PIN 1

1A1 Ue: (1)

PIN 2

X1 Safety input 1

PIN 3

A2 GND

PIN 4

Y1 Safety output 1

PIN 5

OUT Diagnostic output OUT

PIN 6

X2 Safety input 2

PIN 7

Y2 Safety output 2

PIN 8

IN without function

Ambient conditions - Insulation values

Rated insulation voltage U

32 VDC

Rated impulse withstand voltage U

0.8 kV

Overvoltage category

III

Degree of pollution

3

Scope of delivery

Scope of delivery

Actuator must be ordered separately.

General data - Features

Diagnostic output

Yes

Short circuit detection

Yes

Cross-circuit detection

Yes

Safety functions

Yes

Cascadable

Yes

Integral system diagnostics, status

Yes

Number of LEDs

3

Number of semi-conductor outputs with signaling function

1

Number of fail-safe digital outputs

2

Number of series-wiring of sensors

31

General data

Standards

EN IEC 60947-5-3

Working principle

inductive

Housing construction form

Block

Installation conditions (mechanical)

not flush

Sensor topology

Sensor for series wiring

Enclosure material

Glass-fibre, reinforced thermoplastic

Active area

Glass-fibre, reinforced thermoplastic

Gross weight

140 g

Reaction time, maximum

30 ms

Duration of risk, maximum

60 ms

Safety classification

Standards

EN ISO 13849-1 | EN IEC 60947-5-3 | EN IEC 61508

Performance Level, up to

e

Category

4

PFH value

3.60 x 10?? /h

Safety Integrity Level (SIL), suitable for applications in

3

Mission time

20 Year(s)

Electrical data - Safety digital outputs

Rated operating current (safety outputs)

250 mA

Output current, (fail-safe output), maximum

0.25 A

Design of control elements

p-type

Voltage drop U

0.5 V

Leakage current I

0.5 mA

Voltage, Utilisation category DC-12

24 VDC

Current, Utilisation category DC-12

0.25 A

Voltage, Utilisation category DC-13

24 VDC

Current, Utilisation category DC-13

0.25 A

Ambient conditions

Degree of protection

IP65 | IP67

Ambient temperature

-25 ... +70 °C

Storage and transport temperature, minimum

-25 °C

Storage and transport temperature, maximum

+85 °C

Resistance to vibrations

10 … 55 Hz, amplitude 1 mm

Restistance to shock

30 g / 11 ms

Protection class

II

Mechanical data - Connection technique

Termination

Connector plug M12, 8-pole

Note (length of the sensor chain)

Cable length and cross-section change the voltage drop dependiing on the output current

Electrical data - Diagnostic outputs

Design of control elements

p-type

Voltage drop U

5 V

Voltage, Utilisation category DC-12

24 VDC

Current, Utilisation category DC-12

0.05 A

Voltage, Utilisation category DC-13

24 VDC

Current, Utilisation category DC-13

0.05 A

Mechanical data - Switching distances according EN IEC 60947-5-3

Nominal switching distance S

10 mm | 12 mm | 15 mm

Assured switching distance "ON" S

10 mm | 13 mm | 8 mm

Assured switching distance "OFF" S

15 mm | 16 mm | 18 mm

Mechanical data

Actuating panels

Actuation from top

Active area

front side

Switching distance actuator

Actuator CST 180-1 / CST 180-2: 10 mm | Actuator CST 180-1 / CST 180-2: 12 mm | Actuator CST 180-1 / CST 180-2: 16 mm | Actuator CST 34-S-2: 10 mm | Actuator CST 34-S-2: 16 mm | Actuator CST 34-S-2: 8 mm | Actuator CST 34-S-3: 13 mm | Actuator CST 34-S-3: 15 mm | Actuator CST 34-S-3: 18 mm | Actuator CST 34-V-1: 10 mm | Actuator CST 34-V-1: 12 mm | Actuator CST 34-V-1: 15 mm

Hysteresis (Switching distance), maximum

1.5 mm

Repeat accuracy R

0.5 mm

Note (Repeat accuracy R)

Axial offset: the front face allows for an axial misalignment (z) of max. ± 8 mm (see figure: operating principle).

Accessory

Recommendation (actuator)

CST 34-V-1 | CST 34-S-2 | CST 34-S-3 | CST 180-1 | CST 180-2

Recommended safety switchgear

PROTECT PSC1 | SRB-E-301ST | SRB-E-201LC

Approvals - Standards

Certificates

TÜV | cULus | UKCA

Electrical data - Electromagnetic compatibility (EMC)

Interfering radiation

IEC 61000-6-4

EMC rating

IEC 61000-6-2