PHOENIX-CONTACT 2701491

Additional Information

Part Number

2701491

UPC

4046356762854

Country of Origin

DE

ETIM

Group Code : EG000024

Group Description : PLC's

Class Description : Fieldbus, decentr. periphery - digital I/O module

Class Code : EC001599

Version : 7

Note

Utilization restriction

EMC: class A product, see manufacturer's declaration in the download area

Dimensions

Width

60 mm

Height

185 mm

Depth

38 mm

Note on dimensions

The height is 194.5 mm including the mounting plate. With fixing clips pulled out, the height is 212 mm. The depth is 38 mm including the mounting plate (30.5 mm without the mounting plate).

Drill hole spacing

198.5 mm

System limits of the bus coupler

Designation

EtherNet/IP„

Equipment type

EtherNet/IP„ slave

System-specific protocols

EtherNet/IP„ protocols ACD

System-specific protocols

EtherNet/IP„ protocols DLR

System-specific protocols

EtherNet/IP„ protocols IGMP v2

Protocols supported

SNMP v1

Protocols supported

HTTP

Protocols supported

TFTP

Protocols supported

FTP

Protocols supported

BootP

Protocols supported

DHCP

Specification

CIP Edition 3.11 EIP adaptation of CIP 1.12

Supply

Designation

Module electronics and sensors (US)

Connection method

M12 connector (T-coded)

Number of positions

4

Supply voltage

24 V DC

Supply voltage range

19.5 V DC - 31.2 V DC (including all tolerances, including ripple)

Current consumption

typ. 180 mA ±15 % (at 24 V DC)

Designation

Actuators (UA)

Supply voltage range

18 V DC - 31.2 V DC (including all tolerances, including ripple)

Current consumption

typ. 28 mA ±15 % (at 24 V DC)

Digital inputs

Input name

Digital inputs at pin 2 for type A ports

Description of the input

IEC 61131-2 type 1

Number of inputs

4

Protective circuit

Overload protection, short-circuit protection of sensor supply

Nominal input voltage UIN

24 V DC

Nominal input current at UIN

typ. 3 mA

Input voltage range "0" signal

-0.3 V DC - 5 V DC

Input voltage range "1" signal

15 V DC - 30 V DC

Description of the input

IO-Link ports in digital input (DI) mode

Connection method

M12 connector, X01 - X04 have double occupancy

Connection technology

3-wire

Number of inputs

max. 8 (EN 61131-2 type 1)

Nominal input current

typ. 3 mA

Sensor current per channel

max. 200 mA (from L+/L-)

Total sensor current

max. 1.6 A (from L+/L-)

Input filter time

< 1000 µs

Input frequency

0.5 kHz

Type of protection

Overload protection

Type of protection

Short-circuit protection for the sensor supply

Ambient conditions

Ambient temperature (operation)

-25°C - 60°C

Ambient temperature (storage/transport)

-25°C - 85°C

Permissible humidity (operation)

5 % - 95 %

Permissible humidity (storage/transport)

5 % - 95 %

Air pressure (operation)

70 kPa - 106 kPa (up to 3000 m above sea level)

Air pressure (storage/transport)

70 kPa - 106 kPa (up to 3000 m above sea level)

Degree of protection

IP65/IP67

Environmental Product Compliance

China RoHS

Environmentally Friendly Use Period = 25;

China RoHS

For details about hazardous substances go to tab 'Downloads', Category 'Manufacturer's declaration'

Electrical isolation

Test section

24 V supply (communications power and sensor supply, IO-Link ports)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min.

Test section

24 V supply (communications power and sensor supply, IO-Link ports)/bus connection (Ethernet 2) 500 V AC 50 Hz 1 min.

Test section

24 V supply (communications power and sensor supply, IO-Link ports)/FE 500 V AC 50 Hz 1 min.

Test section

Bus connection (Ethernet 1)/FE 500 V AC 50 Hz 1 min.

Test section

Bus connection (Ethernet 2)/FE 500 V AC 50 Hz 1 min.

Test section

Bus connection (Ethernet 1)/bus connection (Ethernet 2) 500 V AC 50 Hz 1 min.

Test section

24 V supply (actuator supply)/24 V supply (communications power and sensor supply, IO-Link ports) 500 V AC 50 Hz 1 min.

Test section

24 V supply (actuator supply)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min.

Test section

24 V supply (actuator supply)/bus connection (Ethernet 2) 500 V AC 50 Hz 1 min.

Test section

24 V supply (actuator supply)/FE 500 V AC 50 Hz 1 min.

Digital outputs

Output description

IO-Link ports in digital output (DO) mode

Connection method

M12 connector, X01 - X04 have double occupancy

Connection technology

3-wire

Number of outputs

max. 8

Nominal output voltage

24 V DC

Maximum output current per channel

150 mA

Maximum output current per device

1.2 A

Nominal load, ohmic

3.6 W (160 Ω, at nominal load)

Nominal load, inductive

3.6 VA (0.8 H, 160 Ω, at nominal load)

Signal delay

max. 150 µs (when switched on)

Signal delay

max. 200 µs (when switched off)

Switching rate

1 per second, maximum (at nominal inductive load)

Limitation of the voltage induced on circuit interruption

-15 V DC

Output voltage when switched off

max. 1 V

Output current when switched off

max. 300 µA

Type of protection

Overload protection

Type of protection

Short-circuit protection

Behavior with overload

Shutdown with automatic restart

Interfaces

Designation

EtherNet/IP„

No. of channels

2

Connection method

M12 fast connection technology

Note on the connection method

D-coded

Designation connection point

Copper cable

Transmission speed

10/100 Mbps (with auto negotiation)

Number of positions

4

Standards and Regulations

Mechanical tests

Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g

Mechanical tests

Shock in acc. with EN 60068-2-27/IEC 60068-2-27 30g, 11 ms period, half-sine shock pulse

Mechanical tests

Continuous shock according to EN 60068-2-27/IEC 60068-2-27 10g

Protection class

III (IEC 61140, EN 61140, VDE 0140-1)