NOSHOK 615-100inH2O-1-1-8-8

Additional Information

Part Number

615-100inH2O-1-1-8-8

Specifications

Industry Standards/Certifications

European Conformity (CE) Compliant to Electromagnetic Compatibility (EMC) Norm European Standards (EN) 61326:2014/A1:1998, Radio Frequency Interference (RFI), Electromagnetic Interference (EMI) and Electrostatic Discharge (ESD) Protection

Type

Pressure Transducer

Operating Temperature [Max]

100 ºC, 212 ºF

Operating Temperature [Min]

-40 ºC, -40 ºF

Output Signal

4 mA to 20 mA, 2-Wire

Power Supply

10 Vdc to 30 Vdc (4 mA to 20 mA, 2-wire, 1 Vdc to 5 Vdc, 3-wire, 1 Vdc to 6 Vdc, 3-wire 0 Vdc to 5 Vdc, 3-wire) 14 Vdc to 30 Vdc (0 Vdc to 10 Vdc, 3-wire, 1 Vdc to 11 Vdc, 3-wire)

Series

615 (Internal Diaphragm)

Adjustment

±10% full scale for zero and span

Ambient Temperature Range

-10 to 80 ºC, -15 to 175 ºF

Approximate Weight

7.2 oz

Compensated Temperature Range

0 to 80 ºC, 32 to 175 ºF

Connection Material

316 Stainless Steel

Diaphragm Seals

NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.

Digital Indicators

NOSHOK Digital Indicators provide local indication for pressure, level and temperature transmitters.

Distribution Manifolds

NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.

Electrical Protection

Reverse polarity, over-voltage and short circuit protection

Environmental Rating

Ingress Protection (IP65)

Full Scale Best Fit Straight Line (BFSL) Accuracy (±)

0.25 %

Installed Options and Accessories

SS Threaded Orifice - 615 Only (ST8) G 1 Weld-on Adaptor - 616 Only (G1) G 1/2 Weld-on Adaptor - 616 Only (G1/2)

Load Limitations

?(VPower-10)/0.020 Amp for 4 mA to 20 mA ?10,000 ? for 0 Vdc to 10 Vdc, 3-wire ?5,000 ? for 0 Vdc to 5 Vdc, 3-wire

Measuring Element

316 stainless steel for vacuum through 150 psi 17-4PH stainless steel for ?500 psi

Media Temperature Range

-30 to 100 ºC, -20 to 212 ºF

Pressure Range

0 to 100 inH 2 O

Pressure Snubbers - Piston Type

Resist clogging and are self-cleaning Five different sized pistons included with each snubber to ensure the correct amount of snubbing for virtually every application Available in Brass and 316 Stainless Steel in 1/4" NPT, 1/2" NPT or SAE J1926-3: 7/16-20 Weight approximately 0.2 lb. for 1/4" & 7/16", and approximately 0.4 lb. for 1/2"??????

Process Connections

1/2 in. National Pipe Thread (NPT) Male

Response Time

?1 ms (between 10% and 90% full scale)

Service Life

> 100,000,000 Load Cycles

Shock According to International Electrotechnical Commission (IEC) 60068-2-27

1,000 g

Stability

?±0.2% full scale for 1 year, non-accumulating

Steam Syphons

Protect the instrument from the damaging effects of high temperature steam Recommended for use in all steam applications Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3,800 psi at 850 ºF

Swivel Adapters

Temperature ratings: 15,000 psi at 200 ºF and 3,000 psi at 1,000 ºF Used with gauges and gauge valves to adjust the line of sight Rotates 360º to allow the connected instrument to be positioned in the desired direction The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut All 316 Stainless Steel construction Standard with 1/2" NPT male process - 1/2" NPT female instrument connections Also available with 1/4" NPT connections, same specifications apply Weight approximately 0.8 lb.

Vibration According to International Electrotechnical Commission (IEC) 60068-2-6

15 g

Warranty

3 yr