B-LINE 109797

Additional Information

Part Number

109797

Specifications

Contact configuration

1 NO

Terminal capacity (flexible with ferrule)

1 x (0.75 - 16) mm², Main cables

Rated operational current for specified heat dissipation (In)

32 A

10.11 Short-circuit rating

Is the panel builder's responsibility. The specifications for the switchgear must be observed.

Rated operational power at AC-1, 380/400 V, 50 Hz

20 kW

Rated operational power at AC-3, 380/400 V, 50 Hz

7.5 kW

Conventional thermal current ith (3-pole, enclosed)

27 A

Rated operational power at AC-4, 380/400 V, 50 Hz

7 kW

Rated control supply voltage (Us) at AC, 50 Hz - min

230 V

10.4 Clearances and creepage distances

Meets the product standard's requirements.

Number of contacts (normally closed) as main contact

0

Short-circuit current rating (high fault at 480 V)

125/70 A, Class J, max. Fuse, SCCR (UL/CSA)

Conventional thermal current ith at 55°C (3-pole, open)

29 A

Rated operational power (NEMA)

11 kW

10.2.3.1 Verification of thermal stability of enclosures

Meets the product standard's requirements.

Ambient storage temperature - min

40°C

Rated breaking capacity at 380/400 V

180 A

Short-circuit current rating (basic rating)

125 A, max. CB, SCCR (UL/CSA)

Rated control supply voltage (Us) at AC, 50 Hz - max

230 V

Rated breaking capacity at 660/690 V

120 A

Rated operational current (Ie) at DC-1, 220 V

32 A

Special purpose rating of elevator control

5 HP, 240 V 60 Hz 3-ph, (UL/CSA)

Ambient operating temperature - max

60°C

Assigned motor power at 115/120 V, 60 Hz, 1-phase

2 HP

Electrical connection type of main circuit

Screw connection

Number Of Poles

Four-pole

Ambient operating temperature - min

-25°C

10.6 Incorporation of switching devices and components

Does not apply, since the entire switchgear needs to be evaluated.

10.2.6 Mechanical impact

Does not apply, since the entire switchgear needs to be evaluated.

10.3 Degree of protection of assemblies

Does not apply, since the entire switchgear needs to be evaluated.

Application

Contactors for 4 pole electric consumers

Operating frequency

5000 mechanical Operations/h (DC operated)

Voltage type

AC

Short-circuit protection rating (type 1 coordination) at 400 V

63 A gG/gL

Product category

Contactors

Rated operational power at AC-1, 500 V, 50 Hz

26 kW

Power consumption, pick-up, 50 Hz

50 VA, Dual-frequency coil in a cold state and 1.0 x Us

Heat dissipation capacity Pdiss

0 W

Assigned motor power at 460/480 V, 60 Hz, 3-phase

15 HP

Special purpose rating of tungsten incandescent lamps

40 A, 480 V 60 Hz 3phase, 277 V 60 Hz 1phase, (UL/CSA)

Switching time (AC operated, make contacts, opening delay) - min

8 ms

Continuous ampere rating

32 A

Rated operational power at AC-3, 240 V, 50 Hz

5.5 kW

Terminal capacity (solid/stranded AWG)

18 - 6, Main cables

10.9.2 Power-frequency electric strength

Is the panel builder's responsibility.

Degree of protection

IP00

Overvoltage category

III

Rated operational power at AC-1, 440 V, 50 Hz

23 kW

Switching time (AC operated, make contacts, opening delay) - max

14 ms

Ambient storage temperature - max

80°C

Pollution degree

3

Rated operational current (Ie) at AC-1, 380 V, 400 V, 415 V

32 A

Power consumption, pick-up, 60 Hz

40 W, Dual-frequency coil in a cold state and 1.0 x Us, at 60 Hz

Switching time (AC operated, make contacts, closing delay) - max

22 ms

Rated impulse withstand voltage (Uimp)

8000 V AC

Connection

Screw connection

Tightening torque

3 Nm, Screw terminals, Main cables

Conventional thermal current ith (1-pole, enclosed)

76 A

Rated operational current (Ie) at AC-3, 660 V, 690 V

12 A

Type

Full voltage non-reversing small contactor

10.2.2 Corrosion resistance

Meets the product standard's requirements.

10.2.4 Resistance to ultra-violet (UV) radiation

Meets the product standard's requirements.

10.2.7 Inscriptions

Meets the product standard's requirements.

Rated operational current (Ie) at AC-3, 380 V, 400 V, 415 V

18 A

Number of contacts (normally open contacts)

1

Switching time (AC operated, make contacts, closing delay) - min

16 ms

Short-circuit protection rating (type 2 coordination) at 400 V

35 A gG/gL

Special purpose rating of ballast electrical discharge lamps

40 A (480V 60Hz 3phase, 277V 60Hz 1phase)

Number of auxiliary contacts (normally open contacts)

1

Special purpose rating of definite purpose rating

25 A, FLA 480 V 60 Hz 3-ph, 100,000 cycles acc. to UL 1995, (UL/CSA)

Shock resistance

7 g, N/O auxiliary contact, Mechanical, according to IEC/EN 60068-2-27, Half-sinusoidal shock 10 ms

Rated operational current (Ie) at DC-1, 110 V

32 A

Assigned motor power at 230/240 V, 60 Hz, 3-phase

10 HP

Drop-out voltage

AC operated: 0.6 - 0.4 x UC, AC operated

Power consumption, sealing, 60 Hz

2.1 W, Dual-frequency coil in a cold state and 1.0 x Us

Resistance per pole

2.7 mΩ

Ambient operating temperature (enclosed) - min

25°C

Stripping length (control circuit cable)

10 mm

10.12 Electromagnetic compatibility

Is the panel builder's responsibility. The specifications for the switchgear must be observed.

Special purpose rating of refrigeration control (CSA only)

40 A, FLA 480 V 60 Hz 3phase; (CSA)

Amperage Rating

200A

10.2.5 Lifting

Does not apply, since the entire switchgear needs to be evaluated.

Stripping length (main cable)

10 mm

Ambient operating temperature (enclosed) - max

40°C

Special purpose rating of resistance air heating

40 A, 480 V 60 Hz 3phase, 277 V 60 Hz 1phase, (UL/CSA)

Rated control supply voltage (Us) at DC - min

0 V

Short-circuit current rating (high fault at 600 V)

10/100 kA, Fuse, SCCR (UL/CSA)

Frequency rating

50-60 Hz

10.8 Connections for external conductors

Is the panel builder's responsibility.

Number of main contacts (normally open contact)

4

Rated breaking capacity at 220/230 V

180 A

Screw size

M5, Terminal screw, Main cables

Rated operational current (Ie) at AC-4, 400 V

15 A

Terminals

Screw terminals

Short-circuit protection rating (type 2 coordination) at 690 V

35 A gG/gL

Assigned motor power at 575/600 V, 60 Hz, 3-phase

20 HP

Protection

Finger and back-of-hand proof, Protection against direct contact when actuated from front (EN 50274)

Power consumption, sealing, 50 Hz

2.1 W, Dual-frequency coil in a cold state and 1.0 x Us

Terminal capacity (stranded)

1 x 16 mm², Main cables

HP rating - max

2, 5/ 7.5, 10, 15 20 hp (1/3PH @120, 240/ 208, 240, 480, 600 V)

Rated breaking capacity at 500 V

180 A

Rated operational power at AC-1, 415 V, 50 Hz

22 kW

Rated operational power at AC-3, 415 V, 50 Hz

10 kW

Climatic proofing

Damp heat, cyclic, to IEC 60068-2-30

Connection to SmartWire-DT

No

Static heat dissipation, non-current-dependent Pvs

2.1 W

Rated control supply voltage (Us) at DC - max

0 V

10.9.3 Impulse withstand voltage

Is the panel builder's responsibility.

Utilization category

AC-1: Non-inductive or slightly inductive loads, resistance furnaces

Coil voltage

230-240 Vac, 50/60 Hz

Rated operational current (Ie) at AC-3, 440 V

18 A

10.5 Protection against electric shock

Does not apply, since the entire switchgear needs to be evaluated.

Safe isolation

440 V AC, Between coil and contactss, According to EN 61140

Used with

DILM32-XHI( C), DILA-XHI(V)( C)

Rated operational power at AC-1, 220/230 V, 50 Hz

12 kW

10.13 Mechanical function

The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

10.9.4 Testing of enclosures made of insulating material

Is the panel builder's responsibility.

Heat dissipation per pole, current-dependent Pvid

2.2 W

Switching capacity (auxiliary contacts, general use)

10 A, 600 V AC, (UL/CSA)

Operating temperature - min

-25°C

Residual current

1 mA (with actuation of A1 - A2 by the electronics with "0" signal)

Equipment heat dissipation, current-dependent Pvid

6.6 W

Assigned motor power at 200/208 V, 60 Hz, 3-phase

7.5 HP

Pick-up voltage

0.8 - 1.1 V AC x Uc

Operation

Non-reversing

Terminal capacity (solid)

1 x (0.75 - 4) mm², Control circuit cables

Number of auxiliary contacts (normally closed contacts)

0

Rated operational power at AC-1, 240 V, 50 Hz

13 kW

Power consumption

7.5 kW

10.2.3.2 Verification of resistance of insulating materials to normal heat

Meets the product standard's requirements.

Operating temperature - max

60°C

10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects

Meets the product standard's requirements.

Lifespan, mechanical

10,000,000 Operations (AC operated)

Short-circuit protection rating (type 1 coordination) at 690 V

50 A gG/gL

Rated making capacity up to 690 V (cos phi to IEC/EN 60947)

238 A

Number of contacts

1 NO

Rated operational current (Ie) at DC-1, 60 V

32 A

Rated operational voltage (Ue) at AC - max

690 V

Rated control supply voltage (Us) at AC, 60 Hz - min

240 V

10.7 Internal electrical circuits and connections

Is the panel builder's responsibility.

10.10 Temperature rise

The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.

Switching capacity (main contacts, general use)

40 A, Maximum motor rating (UL/CSA)

Rated operational current (Ie) at AC-3, 500 V

18 A

Assigned motor power at 230/240 V, 60 Hz, 1-phase

5 HP

Screwdriver size

0.8 x 5.5/1 x 6 mm, Terminal screw, Standard screwdriver

Duty factor

100 %

Rated operational current (Ie) at AC-3, 220 V, 230 V, 240 V

18 A

Conventional thermal current ith of main contacts (1-pole, open)

84 A

Rated control supply voltage (Us) at AC, 60 Hz - max

240 V

Rated operational power at AC-1, 690 V, 50 Hz

35 kW

Switching capacity (auxiliary contacts, pilot duty)

P300, DC operated (UL/CSA)

Rated insulation voltage (Ui)

690 V

General

Model Code

DILMP32-10(230V50HZ,240V60HZ)

EAN

4015081093694

Product Length/Depth

97 mm

Product Height

85 mm

Product Width

58 mm

Product Weight

.49 kg

Certifications

CSA

Catalog Notes

Contacts according to EN 50012