WEIDMULLER 0570360000

Additional Information

Part Number

0570360000

Rated Data Acc. To Ul 1059

Rated voltage (Use group B / UL 1059)

300 V

Rated voltage (Use group D / UL 1059)

300 V

Rated current (Use group B / UL 1059)

10 A

Rated current (Use group D / UL 1059)

10 A

Wire cross-section, AWG, min.

AWG 26

Wire cross-section, AWG, max.

AWG 14

Approvals

Approvals

CSA, EAC, MARITREG

ROHS

Conform

Dimensions And Weights

Width

22.12 mm

Width (inches)

0.871 inch

Height

24 mm

Height (inches)

0.945 inch

Height of lowest version

19.5 mm

Depth

18.5 mm

Depth (inches)

0.728 inch

Net weight

14.62 g

Rated Data Acc. To Iec

Tested acc. to standard

IEC 60664-1, IEC 61984

Rated current, min. number of poles (Tu=20°C)

24 A

Rated current, max. number of poles (Tu=20°C)

19 A

Rated current, min. number of poles (Tu=40°C)

21 A

Rated current, max. number of poles (Tu=40°C)

16 A

Rated voltage for surge voltage class / pollution degree II/2

630 V

Rated voltage for surge voltage class / pollution degree III/2

320 V

Rated voltage for surge voltage class / pollution degree III/3

250 V

Rated impulse voltage for surge voltage class/ pollution degree II/2

2.5 kV

Rated impulse voltage for surge voltage class/ pollution degree III/2

2.5 kV

Rated impulse voltage for surge voltage class/ contamination degree III/3

2.5 kV

Short-time withstand current resistance

3 x 1s with 120 A

Material Data

Insulating material

PA

Colour

orange

Colour chart (similar)

RAL 2000

Insulating material group

I

Comparative Tracking Index (CTI)

‰¥ 600

Insulation strength

‰¥ 108 ©

UL 94 flammability rating

V-2

Contact material

CuZn

Contact surface

tinned

Layer structure of solder connection

1.5-3 µm Ni / 4-6 µm Sn

Storage temperature, min.

-25 °C

Storage temperature, max.

55 °C

Max. relative humidity during storage

80 %

Operating temperature, min.

-50 °C

Operating temperature, max.

100 °C

Temperature range, installation, min.

-25 °C

Temperature range, installation, max.

100 °C

Classifications

ETIM 6.0

EC002643

ETIM 7.0

EC002643

EClass 9.0

27-44-04-01

EClass 9.1

27-44-04-01

EClass 10.0

27-44-04-01

UNSPSC

30-21-18-01

System Parameters

Product family

OMNIMATE Signal - series TOP1.5GS

Wire connection method

TOP connection

Mounting onto the PCB

THT solder connection

Conductor outlet direction

180°

Pitch in mm (P)

5.08 mm

Pitch in inches (P)

0.2 inch

Number of poles

4

Fitted by customer

No

Number of rows

1

Solder pin length (l)

4.5 mm

Solder pin dimensions

0.8 x 1.0 mm

Solder eyelet hole diameter (D)

1.3 mm

Solder eyelet hole diameter tolerance (D)

+ 0,1 mm

Number of solder pins per pole

2

Screwdriver blade

0.6 x 3.5

Screwdriver blade standard

DIN 5264

Tightening torque, min.

0.4 Nm

Tightening torque, max.

0.5 Nm

Clamping screw

M 2.5

Stripping length

10 mm

L1 in mm

15.24 mm

L1 in inches

0.6 inch

Touch-safe protection acc. to DIN VDE 0470

IP 20

Touch-safe protection acc. to DIN VDE 57 106

Safe from finger touch

Volume resistance

1.20 m©

Insulation strength

‰¥ 108 ©

Packing

Packaging

Box

VPE length

63 mm

VPE width

113 mm

VPE height

144 mm

Notes

Notes

Additional colours on request Rated current related to rated cross-section & min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 Crimp form A for wire end ferrules with PZ 6/5 crimping tool are recommended for the largest cable sizes. P on drawing = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

IPC conformity

Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request.

Conductors Suitable For Connection

Clamping range, min.

0.13 mm²

Clamping range, max.

2.5 mm²

Wire connection cross section AWG, min.

AWG 26

Wire connection cross section AWG, max.

AWG 14

Solid, min. H05(07) V-U

0.5 mm²

Solid, max. H05(07) V-U

2.5 mm²

Flexible, min. H05(07) V-K

0.5 mm²

Flexible, max. H05(07) V-K

2.5 mm²

W. plastic collar ferrule, DIN 46228 pt 4, min.

0.5 mm²

W. plastic collar ferrule, DIN 46228 pt 4, max.

2.5 mm²

W. wire end ferrule, DIN 46228 pt 1, min.

0.5 mm²

W. wire end ferrule, DIN 46228 pt 1, max.

2.5 mm²

Plug gauge in accordance with EN 60999 a x b; ø

2.4 mm x 1.5 mm

Max. clamping range

2.5 mm²

Rated Data Acc. To Csa

Institute (CSA)

CSA

Certificate No. (CSA)

154685-1501716

Rated voltage (Use group B / CSA)

300 V

Rated voltage (Use group D / CSA)

300 V

Rated current (Use group B / CSA)

10 A

Rated current (Use group D / CSA)

10 A

Wire cross-section, AWG, min.

AWG 26

Wire cross-section, AWG, max.

AWG 14

Reference to approval values

Specifications are maximum values, details - see approval certificate.